747993
51
Verklein
Vergroot
Pagina terug
1/80
Pagina verder
51 / 80
33028_mc_28_Teil2_jh
D.red (Differentiation reduction)
If you use the aileron differentiation, the aileron effect is strongly
affected by the deflection of the ailerons. Justification: a further
excursion of the one aileron is almost impossble and the control sur-
face moving downward does not reach the "normal" position.
In order to restore this reduced aileron effect, the "differentiation
reduction" reduces the degree of the aileron differentiation.
A 0% value means that the "aileron differentiation" programmed in
the transmitter is held. A value equal to the set percentage of the
aileron differentiation means is completely removed in maximum
butterfly function (with flaps completely out). In case of a reduction
value bigger than the set aileron differentiation will be removed
completely before the full deflection of the flap control stick.
Elevator curve (Brake -> Elevator)
If the flaps extend through the brake control as described previously
in the "Brake settings" menu, the speed of a model is often adversely
affected. The exteded flaps usually produce a tail or nose moment,
the model will react gaining or loosing altitude.
With this mixer, the potential tail or nose moment can be avoided by
a correction value mixed on the elevator. Push the SET button, then
change to the manu page of the 6-point curve mixer "Brake -> ELE".
Programming
The offset you set in the line "Brake offset" of the menu "Model
type" has an effect on this mixer:
When the set offset value is exceeded, the green, vertical bar in the
graphic display, indicating the position of the brake control, moves
away from the edge of the graph. The brake flap control travel auto-
matically respreads to 100%, as described in the "Model type" menu.
The neutral point of the mixer always lies at the left edge of the
graph, independent of the set offset.
Now adjust the Elevator curve in the direction of the opposite end
end points. Set this 6-point curve mixer according to the same prin-
ciple described for the curve mixer in the "Throttle curve" menu.
AI curve
Brake settings
AI
Butt
D.red
0%
0%
0%
0%
0%
0%
FL FL2
Normal
AI curve
Brake settings
Butt
D.red
0%
0%
0%
0%
0%
0%
Normal
Input
Output
Point ?
–100%
0%
0%
Brake
normal
Ele
Curve off
Normal
Input
Output
Point 1
–19%
–6%
–7%
Brake
Normal
Ele
Curve on
51

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Graupner MC-28 4D bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Graupner MC-28 4D in de taal/talen: Engels als bijlage per email.

De handleiding is 17,31 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info