747929
6
Verklein
Vergroot
Pagina terug
1/15
Pagina verder
7
3. Fail-safe function
In its default state, the receiver is set to “Hold” mode. If you lose connection, all
channels hold last given command and the status LED on the receiver turn solid red.
The transmitter also repeats a single warning beep every second. You can use the fail
safe option by programming the throttle channel to respond to a fail-safe situation. : the
throttle channel of an engine-powered model should be set to idle, the throttle channel
of an electric-powered model to “stop”, and the throttle channel of a model helicopter to
“Hold”. When a signal is lost the throttle channel, all channels are driven to the failsafe
position so that it could prevent the model crashing and the personal injury or property
damage.
During normal operations (i. e. when controlling a model) never enter
the range check mode !
CAUTION
The two functions “Binding” and “Range check” described above can be
used by the programming button or the SMART-BOX without any inuence
on the setting value saved in the transmitter and the receiver. However, if
the fail safe option is used by the programming button, all the setting value
which is seen on the fail safe screen in SMART BOX, including the setting
value that could be installed by the programming button, might be reset. For
this reason, we recommend the programming by SMART BOX.
4. Range warning
Since the transmitter’s output is much higher than that of the receiver, the user tends
to be hard to notice the seriousness of the situation and try to keep full control of the
model. So when the receiver signal in the down-link channel becomes too weak, the
transmitter repeats a single warning beep every second. You should y back the model
towards the safe place until the warning signal ceases. If the beep warning does not
cease when you y back, it is that the transmitter or receiver low voltage warning or tem
-
perature warning is activated, you must land the model and cease operations without
delay in this situation.
IMPORTANT
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Graupner GR-24L HoTT - S1022 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Graupner GR-24L HoTT - S1022 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,23 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info