738282
14
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
telltask 1C1
14
14
Programming the Device Using a USB Cable
The device needs no power supply connection during the programming procedure as the power is supplied directly
by the USB connection. The device may therefore be programmed before installing it in the control panel.
NOTE: the relay cannot change status if the main power supply is not present.
Start the programming software.
Connect the USB cable to the PC and the device.
The device needs no installation driver as it is recognized automatically by Windows: this feature makes it easier to
reprogram the device, where necessary, in the future.
If the device is not recognized and the network LED continues to blink red, see the troubleshooting section.
The programming software of telltask 1C1 is clear, simple and self-explanatory. The sections that follow provide a
detailed description of each of the functions in the order in which they are displayed by the program.
Functions
System Password
In order to ensure the security of the system, the device prompts the operator to enter a password of four digits
(and/or characters, in PC mode only) indispensable to be able to send command SMS messages. The default pass-
word is four zeros (0000). For instructions on how to send command SMS messages, see the corresponding section.
List of Administrator Users
This list is made up of the telephone numbers of the users authorized to receive the alarm and/or notification SMS
messages and to control the device using quick commands (see corresponding section).
Temperature Sensor
The device has an internal sensor that can detect the ambient temperature. For default settings, the sensor is disa-
bled. The user may choose between the following operating modes (TMODE):
sensor disabled
sensor enabled
Calibration
It is possible to calibrate the temperature measured by probe (see: commands sms).
Note: It is recommended to calibrate the sensor after about 30 minutes of running, so the device has reached oper-
ating temperature
Room Thermostat Function
It allows you to control the relay output according to the ambient temperature measured by the temperature probe.
When connected to a heating or air-conditioning system, this device enables the temperature of a room to be con-
trolled by monitoring both the comfort temperature Th (heat temperature), the AUTOMATIC function, where present,
and the maintenance temperature Tf (frost temperature), the ANTIFREEZE function.
The temperature thresholds may be set either using the software or from a remote location by means of command
sms (see the Commands section).
The device also has a notification function (Notify SMS), which, when activated, enables the device to inform its
administrator users through an SMS if the room temperature drops 1°C below the frost temperature (Tf), sent repeat-
edly every 15 minutes until it is disabled by the user.
15
Alarm Input
The device has an alarm input, which allows you to send a text message to, both opening and closing of each contact,
administrative users
The text associated with each event may be customized from the software or through a command SMS.
This function informs the user of specific events that take place on the system or plant to which the device is con-
nected such as a boiler breakdown or voltage drop, the opening of a valve, etc..
Phone Ring Function
The device can store a list of telephone numbers and names (up to three hundred) authorized to activate and/or
deactivate the relay output simply by a telephone ring and thus with no cost whatsoever. The device recognizes the
incoming call, cuts if off immediately and activates the plant to which it is connected.
This function (RMODE) may be set in the following modes:
function disabled;
SWITCH mode: the relay is simply toggled ON and OFF; (this mode permanently disables the thermostat func-
tion);
PULSE mode: a programmable pulse of one to twenty seconds is emitted (this mode permanently disables the
thermostat function);
AUTOMATIC mode: used to activate the automatic room thermostat function (providing the temperature sensor
has been activated).
The user may also choose to activate the sms feedback option, which sends an SMS confirming the status of the
plant back to the mobile phone from which the telephone ring was received.
PULSE mode also enables the text of the SMS confirming the command executed to be customized.
Credit Function
This is an innovative function for rechargeable SIM cards that informs the user at a remote location of the residual
credit on the SIM card to which the device is connected.
As each telephone company adopts a different method of indicating the residual credit to users, this function may be
set in one of the following three modes most commonly used by telephone operators:
Using a quick command;
By calling a number to receive an SMS indicating the credit;
By means of a free SMS with a command for receiving the credit indication.
To find out the specific parameters to be entered, we recommend you consult your telephone company.
This function is not fully guaranteed as the telephone companies not only adopt different methods to indicate the
residual credit to users but they also change these methods continually.
Interfaces
GSM LED: GSM Signal Level
This LED identifies the level of the GSM signal. Its operation is described in the table below:
LED colour
Description
RED
The device is receiving no signal and/or is not registered on the network
FLASHING RED
Error situation: see the troubleshooting section
FLASHING GREEN
The number of flashes identifies the level of GSM field: it may range from 1 to 5.
GREEN
The device is receiving or sending an SMS
STATUS LED: Status of the Relay Output
See the section below.
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Grasslin Telltask 1C1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Grasslin Telltask 1C1 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 2,84 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info