505342
57
Verklein
Vergroot
Pagina terug
1/63
Pagina verder
GXP1160/GXP1165 USER MANUAL
Grandstream Networks, Inc.
GXP1160/GXP1165
Small-Medium Business IP Phone
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 2 of 63
GXP1160/GXP1165 User Manual
Index
GUI INTERFACE EXAMPLES .................................................................... 5
GNU GPL INFORMATION .......................................................................... 6
CHANGE LOG ........................................................................................... 7
FIRMWARE VERSION 1.0.5.15 ............................................................................................................ 7
FIRMWARE VERSION 1.0.5.2 .............................................................................................................. 7
WELCOME ................................................................................................. 8
PRODUCT OVERVIEW .............................................................................. 9
FEATURE HIGHTLIGHTS ..................................................................................................................... 9
GXP1160/GXP1165 TECHNICAL SPECIFICATIONS ........................................................................... 9
INSTALLATION ........................................................................................ 11
EQUIPMENT PACKAGING ................................................................................................................. 11
CONNECTING YOUR PHONE ........................................................................................................... 11
SAFETY COMPLIANCES .................................................................................................................... 13
WARRANTY ......................................................................................................................................... 13
USING THE GXP1160/GXP1165 .............................................................. 14
GETTING FAMILAR WITH THE LCD .................................................................................................. 14
GETTING FAMILAR WITH THE KEYPAD ........................................................................................... 16
MAKING PHONE CALLS..................................................................................................................... 17
HANDSET, SPEAKER AND HEADSET MODE ........................................................................... 17
2 CALLS WITH 1 SIP ACCOUNT ................................................................................................. 17
COMPLETING CALLS.................................................................................................................. 18
MAKING CALLS USING IP ADDRESSES ................................................................................... 19
ANSWERING PHONE CALLS ............................................................................................................ 21
RECEIVING CALLS...................................................................................................................... 21
DO NOT DISTURB ....................................................................................................................... 21
DURING A PHONE CALL .................................................................................................................... 21
CALL WAITING/CALL HOLD ....................................................................................................... 21
MUTE ............................................................................................................................................ 22
CALL TRANSFER ........................................................................................................................ 22
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 3 of 63
3-WAY CONFERENCING ............................................................................................................ 23
VOICE MESSAGES (MESSAGE WAITING INDICATOR) ........................................................... 25
CALL FEATURES ................................................................................................................................ 25
CUSTOMIZED LCD SCREEN & XML ................................................................................................. 27
CONFIGURATION GUIDE ........................................................................ 28
CONFIGURATION VIA KEYPAD ......................................................................................................... 28
CONFIGURATION VIA WEB BROWSER ........................................................................................... 33
DEFINITIONS ...................................................................................................................................... 33
STATUS PAGE DEFINITIONS ..................................................................................................... 34
ACCOUNTS PAGE DEFINITIONS ............................................................................................... 35
SETTINGS PAGE DEFINITIONS ................................................................................................. 43
NETWORK PAGE DEFINITIONS ................................................................................................. 47
MAINTENANCE PAGE DEFINITIONS ......................................................................................... 49
PHONEBOOK PAGE DEFINITIONS ............................................................................................ 52
NAT SETTINGS ................................................................................................................................... 54
WEATHER UPDATE ............................................................................................................................ 55
PUBLIC MODE .................................................................................................................................... 55
EDITING CONTACTS AND CLICK-TO-DIAL ...................................................................................... 56
UPGRADING AND PROVISIONING ........................................................ 59
UPGRADE VIA KEYPAD MENU ......................................................................................................... 59
UPGRAGE VIA WEB GUI .................................................................................................................... 59
NO LOCAL TFTP/HTTP SERVERS .................................................................................................... 60
CONFIGURATION FILE DOWNLOAD ................................................................................................ 60
RESTORE FACTORY DEFAULT SETTINGS ........................................... 62
EXPERIENCING THE GXP1160/GXP1165 .............................................. 63
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 4 of 63
Table of Tables
GXP1160/GXP1165 User Manual
Table 1: GXP1160/GXP1165 TECHNICAL SPECIFICATIONS ..................................................................... 9
Table 2: GXP1160/GXP1165 EQUIPMENT PACKAGING .......................................................................... 11
Table 3: GXP1160/GXP1165 CONNECTORS ............................................................................................ 12
Table 4: LCD DISPLAY DEFINITIONS ........................................................................................................ 14
Table 5: GXP1160/GXP1165 LCD ICONS .................................................................................................. 15
Table 6: KEYPAD DEFINITIONS ................................................................................................................ 16
Table 7: CALL FEATURES .......................................................................................................................... 25
Table 8: CONFIGURATION MENU ............................................................................................................. 28
Table of Figures
GXP1160/GXP1165 User Manual
Figure 1: GXP1160/GXP1165 Ports ............................................................................................................ 11
Figure 2: GXP1160/GXP1165 Pin-out ......................................................................................................... 12
Figure 3: Keypad MENU Flow..................................................................................................................... 32
Figure 4: Weather Update ........................................................................................................................... 55
Figure 5: Web GUI - Phonebook->Contacts ............................................................................................... 57
Figure 6: Click-to-Dial .................................................................................................................................. 57
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 5 of 63
GUI INTERFACE EXAMPLES
http://www.grandstream.com/products/gxp_series/general/documents/gxp21xx_gui.zip
1. Screenshot of Login Page
2. Screenshots of Status Pages
3. Screenshots of Accounts Pages
4. Screenshots of Settings Pages
5. Screenshots of Network Pages
6. Screenshots of Maintenance Pages
7. Screenshots of Phonebook Pages
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 6 of 63
GNU GPL INFORMATION
GXP1160/GXP1165 firmware contains third-party software licensed under the GNU General Public
License (GPL). Grandstream uses software under the specific terms of the GPL. Please see the GNU
General Public License (GPL) for the exact terms and conditions of the license.
Grandstream GNU GPL related source code can be downloaded from Grandstream web site from:
http://www.grandstream.com/support/faq/gnu_gpl.
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 7 of 63
CHANGE LOG
This section documents significant changes from previous versions of user manuals for
GXP1160/GXP1165. Only major new features or major document updates are listed here. Minor updates
for corrections or editing are not documented here.
FIRMWARE VERSION 1.0.5.15
Updated Web GUI interface examples with new screenshots for 1.0.5.15. [GUI INTERFACE
EXAMPLES]
Add pin-out information. [Figure 2: GXP1160/GXP1165 Pin-out]
Updated Auto Attended Transfer information. [CALL TRANSFER]
Modified Public Mode information. [PUBLIC MODE]
Updated Click-To-Dial feature information. [EDITING CONTACTS AND CLICK-TO-DIAL]
Updated Keypad MENU options and Keypad configuration flow. [CONFIGURATION VIA KEYPAD]
Updated Web GUI options. [DEFINITIONS]
FIRMWARE VERSION 1.0.5.2
This is the initial version.
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 8 of 63
WELCOME
Thank you for purchasing Grandstream GXP1160/GXP1165 Small-Medium Business IP Phone.
GXP1160/GXP1165 is a next generation small-to-medium business IP phone that features single SIP
account, up to 2 call appearances, a 128 x 40 graphical LCD, 3 XML programmable context-sensitive soft
keys, dual network ports with integrated PoE (GXP1165 only), 3-way conference, and Electronic Hook
Switch (EHS) with Plantronics headset. The GXP1160/1165 delivers superior audio quality, rich and
leading edge telephony features, personalized information and customizable application service,
automated provisioning for easy deployment, advanced security protection for privacy, and broad
interoperability with most 3rd party SIP devices and leading SIP/NGN/IMS platforms. It is a perfect choice
for small-to-medium businesses looking for a high quality, feature rich IP phone with highly affordable cost.
Caution:
Changes or modifications to this product not expressly approved by Grandstream, or operation of this
product in any way other than as detailed by this User Manual, could void your manufacturer warranty.
Warning:
Please do not use a different power adaptor with the GXP1160/GXP1165 as it may cause damage to the
products and void the manufacturer warranty.
This document is subject to change without notice. The latest electronic version of this user manual is
available for download here:
http://www.grandstream.com/support
Reproduction or transmittal of the entire or any part, in any form or by any means, electronic or print, for
any purpose without the express written permission of Grandstream Networks, Inc. is not permitted.
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 9 of 63
PRODUCT OVERVIEW
FEATURE HIGHTLIGHTS
128 x 40 pixel graphical LCD display;
Single SIP account, up to 2 call appearances, 3 XML programmable context-sensitive soft keys, 3-way
conference;
Phonebook with up to 500 contacts and call history with up to 500 records;
Automated personal information service (e.g., local weather), personalized music sing tone/ring back
tone;
Dual switched auto-sensing 10/100Mbps network ports, integrated PoE (GXP1165 only);
Automated provisioning using TR-069 or AES encrypted XML configuration file, SRTP and TLS for
advanced security protection, 802,1x for media access control.
GXP1160/GXP1165 TECHNICAL SPECIFICATIONS
Table 1: GXP1160/GXP1165 TECHNICAL SPECIFICATIONS
Protocols and
Standards
SIP RFC3261, TCP/IP/UDP, RTP/RTCP, HTTP/HTTPS, ARP/RARP
, ICMP, DNS
(A record, SRV, NAPTR), DHCP, PPPoE, TELNET, TFTP, NTP, STUN, SIMPLE,
TR-069, 802.1X, LLDP, LLDP-MED, L DAP, IPv6, TLS, SRTP
Network Interfaces
Dual switched 10/100Mbps port, integrated PoE (GXP1165 only)
Graphic Display
128 x 40 graphical LCD display
Feature Keys
1 SIP account, 3 XML programmable context sensitive soft keys, 5
Navigation/Menu/Volume keys, 9 dedicated function keys for PHONEBOOK,
MESSAGE (with LED indicator), HOLD, TRANSFER, CONFERENCE, FLASH,
SPEAKERPHONE, VOLUME, SEND/REDIAL
Voice Codec
Support for G.723.1, G.729A/B, G.711u/a, G.726-32, G.722 (wide-band), iLBC,
in-band and out-of-band DTMF (in audio, RFC2833, SIP INFO)
Telephony Features
Hold, transfer, forward, 3-
way conference, downloadable phone book (XML,
LDAP, up to 500 items), call waiting, call log (up to 500 records), off-hook auto dial,
auto answer, click-to-dial, flexible dial plan, hot-
desking, personalized music
ringtones, server redundancy and fail-over
HD Audio
Yes, HD handset with support for wideband audio
Headset Jack
RJ9, supporting Electronic Hook Switch (EHS) with Plantronics headsets
Base Stand
Yes, 1 angle position available
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 10 of 63
Wall Mountable
Yes
QoS
Layer 2 (802.1Q, 802.1p) and Layer 3 (ToS, DiffServ, MPLS) QoS
Security
User and administrator level passwords, MD5 and MD5-
sess based
authentication, 256-bit AES encrypted configuration file, TLS, SRTP, 802.1X media
access control
Multi-language
English, German, Italian, French, Spanish, Portuguese, Russian, Croatian,
Simplified Chinese, traditional Chinese, Korean, Japanese and etc
Upgrade and
Provisioning
Firmware upgrade via TFTP/HTTP/HTTPS, mass provisioning using TR-
069 or
AES encrypted XML configuration file
Power and Green
Energy Efficiency
Universal power adapter:
Input: 100-240VAC 50-60Hz; Output: 5VDC, 800mA
Integrated Power-over-Ethernet (Built-in auto-sensing: Cisco and IEEE 802.3af
standard)
Max power consumption 2.5W (power adapter) or 3W (PoE)
Physical
Unit dimension: 154mm (W) x 200mm (L) x 79mm (D) (handset onhook)
Unit weight: 0.6kg
Package weight: 1.03kg
Operating
Temperature and
Humidity
Operating: 32-104
o
F / 0-40
o
C, 10-90% (non-condensing)
Storage: 14-140
o
F / -10-60
o
C
Package Content
GXP1160/GXP1165 phone, handset with cord, base stand, universal power
supply, network cable, quick start guide
Compliance
FCC Part 15 (CFR 47) Class B; EN55022 Class B, EN55024, EN61000-3-2,
EN61000-3-3, EN60950-1; AS/NZS CISPR 22 Class B, AS/NZS CISPR 24, RoHS;
UL 60950 (power adapter)
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 11 of 63
INSTALLATION
EQUIPMENT PACKAGING
Table 2: GXP1160/GXP1165 EQUIPMENT PACKAGING
Main Case
Yes 1
Handset
Yes 1
Phone Cord
Yes 1
Power Adaptor
Yes 1
Ethernet Cable
Yes 1
Phone Stand
Yes 1
Quick Start Guide
Yes 1
CONNECTING YOUR PHONE
Figure 1: GXP1160/GXP1165 Ports
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 12 of 63
Table 3: GXP1160/GXP1165 CONNECTORS
Handset Port
RJ9
Headset Port
RJ9 headset connector port, supporting EHS (Electronic Hook-Switch) with
Plantronics headsets
LAN Port
10/100Mbps RJ-45 port connecting to Ethernet, integrated PoE (GXP1165
only)
PC Port
10/100Mbps RJ-45 port for PC connection
Power Jack
5V DC Power connector port
To set up the GXP1160/GXP1165, follow the steps below:
1. Attach the phone stand to the back of the phone where they are slots;
2. Connect the handset and main phone case with the phone cord;
3. Connect the LAN port of the phone to the RJ45 socket of a hub/switch or a router (LAN side of the
router) using the Ethernet cable;
4. Connect the 5V DC output plug to the power jack on the phone; plug the power adapter into an
electrical outlet. If PoE switch is used on GXP1165 in step 3, this step could be skipped;
5. The LCD will display provisioning or firmware upgrade information. Before continuing, please wait for
the date/time display to show up;
6. Using the keypad configuration menu or phone's embedded web server (Web GUI) by entering the IP
address in web browser, you can further configure the phone.
Please see below the pin-out information for GXP1160/GXP1165.
Figure 2: GXP1160/GXP1165 Pin-out
GXP1160/GXP1165 Power Jack
GXP1160/GXP1165 Handset/Headset Jack
GXP1160/GXP1165 Handset/Headset Plug
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 13 of 63
SAFETY COMPLIANCES
The GXP1160/GXP1165 phone complies with FCC/CE and various safety standards. The
GXP1160/GXP1165 power adapter is compliant with the UL standard. Use the universal power adapter
provided with the GXP1160/GXP1165 package only. The manufacturer’s warranty does not cover
damages to the phone caused by unsupported power adapters.
WARRANTY
If the GXP1160/GXP1165 phone was purchased from a reseller, please contact the company where the
phone was purchased for replacement, repair or refund. If the phone was purchased directly from
Grandstream, contact the Grandstream Sales and Service Representative for a RMA (Return Materials
Authorization) number before the product is returned. Grandstream reserves the right to remedy warranty
policy without prior notification.
Warning:
Use the power adapter provided with the phone. Do not use a different power adapter as this may damage
the phone. This type of damage is not covered under warranty.
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 14 of 63
USING THE GXP1160/GXP1165
GETTING FAMILAR WITH THE LCD
GXP1160/GXP1165 has a dynamic and customizable screen. The screen displays differently depending
on whether the phone is idle or in use (active). The following table describes the items displayed on the
GXP1160/GXP1165 idle screen.
Table 4: LCD DISPLAY DEFINITIONS
DATE AND TIME
Displays the current date and time. It can be synchronized with
Internet time servers.
LOGO NAME
Displays company logo name. This logo name can be customized via
xml screen customization. The maximum size for logo name string is 26
characters in English (approximately).
NETWORK STATUS
Shows the status of network in the middle of the screen. It will indicate
whether the network is down or starting.
STATUS BAR
Shows the status of the phone for registration status, call features and
etc, using icons as shown in the next table.
SOFTKEYS in Idle Screen
The softkeys are context sensitive and will change depending on the
status of the phone. Typical functions assigned to softkeys are:
NextScr
Toggles among default idle screen, weather information, IP
Address and extension number.
Headset
Onhook/offhook using headset; or toggle to headset mode.
FwdAll
Unconditionally forwards the phone line (account 1) to another
phone.
Missed
Shows up unanswered calls to this phone.
Redial
Redials the last dialed number when there is existed dialed call
log.
SOFTKEYS in Call Screen
The softkeys are context sensitive and will change depending on the
call status of the phone. Here are the main softkeys in call screen.
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 15 of 63
Redial
Redials the last dialed number after off hook when there is existed
call log.
Dial
Dials the call out after off hook and entering the number.
Answer
Answers the incoming call when the phone is ringing.
Reject
Rejects the incoming call when the phone is ringing.
EndCall
Ends the active call.
Headset
Onhook/offhook using headset; or toggle to headset mode.
Mute
Mute/Unmute in the current active call.
Transfer
Transfer softkey will show up after pressing TR
AN button and
entering transfer target number. Press Transfer softkey to do blind
transfer.
Split
In auto-attended transfer mode, after establishing the second call,
press Split to quit transfer and go back to normal talking status.
ConfCall
Conferences the active calls.
ReConf
Re-establish the conference among the calls on hold.
Table 5: GXP1160/GXP1165 LCD ICONS
Registration Status: Registered.
Registration Status: Not Registered.
Handset Status.
OFF - handset on hook
ON - handset off hook
Speaker Status.
OFF - speaker off
ON - speaker on
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 16 of 63
Headset Status.
OFF - headset off
ON - headset on
DND Status.
OFF - Do Not Disturb disabled
ON - Do Not Disturb enabled
Call Forward Status.
OFF - Call Forward feature disabled
ON - Call Forward feature enabled
MUTE Status.
OFF - The active call is not muted
ON - The active call is muted
SRTP Status.
OFF - SRTP is not used
ON - SRTP is used
GETTING FAMILAR WITH THE KEYPAD
The following table describes the buttons used on the GXP1160/GXP1165 keypad.
Table 6: KEYPAD DEFINITIONS
Place active call on hold, or resume the call on
hold.
Transfer an active call to another number.
Establish 3-way conference call with other 2
parties.
Bring
up a new line; or answer the second
incoming call.
Speaker.
Send out the number, or redial.
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 17 of 63
Phonebook. Brings phonebook on screen.
Voicemail. Press to retrieve voice mails.
Navigation Keys/Menu.
Press the 4 navigation keys to move
up/down/left/right;
Press the round button in the center to enter
Keypad Configuration MENU when phone is in
idle;
The round button "MENU" can also be used as
ENTER key when in Keypad Configuration.
Volume. Press "-" or "+" to adjust the volume.
0 - 9, *, # Standard phone keypad.
MAKING PHONE CALLS
HANDSET, SPEAKER AND HEADSET MODE
The GXP1160/GXP1165 allows users to switch among handset, speaker or headset when making calls.
Press the Hook Switch to switch to handset; press the Headset softkey to switch to headset; or press the
Speaker button
to switch to speaker.
2 CALLS WITH 1 SIP ACCOUNT
GXP1160/GXP1165 can support up to two lines "virtually" mapped to one SIP account. By picking up the
handset, the GXP1160/GXP1165 will be in off hook state and the dial tone will be heard. To make a call,
dial out the number with the current line.
During the call, users can press the FLASH key
to hold the current call and make/answer another
call. If they are 2 calls established, users can switch the two lines by pressing the FLASH key
.
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 18 of 63
COMPLETING CALLS
There are several ways to complete a call on GXP1160/GXP1165.
On hook dialing. Enter the number when the phone is on hook and then send out.
When the phone is in idle, enter the number to be dialed out;
Take handset off hook; or
Press Speaker button; or
Press Headset softkey with headset plugged in;
The call will be dialed out.
Off hook and dial. Off hook the phone, enter the number and send out.
Take handset off hook; or
Press Speaker button; or
Press Headset softkey with headset plugged in;
You shall hear dial tone after off hook;
Enter the number;
Press SEND key
or # to dial out.
Redial. Redial the last dialed number.
Take handset off hook; or
Press Speaker button; or
Press Headset softkey with headset plugged in; or
When the phone is in idle;
Press SEND key
, or the REDIAL softkey.
Via Call History. Dial the number logged in phone's call history.
Press MENU button to bring up the main menu;
Enter Call History and select "Answered Calls", "Missed Calls", "Transferred Calls" or "Forwarded
Calls";
Select the entry you would like to call using the navigation "UP" and "DOWN" arrow keys;
Press SEND key
to dial out.
Via Phonebook. Dial the number from the phonebook.
Press
key to bring up Phonebook; or
Press MENU button to bring up the main menu and select Phonebook to enter;
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 19 of 63
Select the phonebook entry you would like to call using the navigation "UP" and "DOWN" arrow
keys;
Press SEND key
to dial the selected contact.
Via Paging/Intercom.
Take handset off hook; or
Press Speaker button; or
Press Headset softkey with headset plugged in;
You shall hear dial tone after off hook;
Press MENU button to switch the call screen from "DIAL" to "Paging";
Enter the number;
Press SEND key
or # to dial out.
Note:
After entering the number, the phone waits for the No Key Entry Timeout (Default timeout is 4 seconds,
configurable via Web GUI) before dialing out. Press SEND key or # key to override the No
Key Entry Timeout;
If digits have been entered after handset is off hook, the SEND key
will works as SEND
instead of REDIAL;
By default, # can be used as SEND to dial the number out. Users could disable it by setting "User # as
Dial Key" to "No" from Web GUI->Account->Call Settings;
For Paging/Intercom, if the SIP Server/PBX supports the feature and has Paging/Intercom feature
code set up already, users do not necessarily need toggle to paging mode in the call screen. Simply
dial the feature code with extension as a normal call.
MAKING CALLS USING IP ADDRESSES
Direct IP Call allows two phones to talk to each other in an ad-hoc fashion without a SIP proxy. VoIP calls
can be made between two phones if:
Both phones have public IP addresses; or
Both phones are on the same LAN/VPN using private or public IP addresses; or
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 20 of 63
Both phones can be connected through a router using public or private IP addresses (with necessary
port forwarding or DMZ).
To make a direct IP call, please follow the steps below:
Press MENU button to bring up main menu;
Select "Direct IP Call" using the navigation arrow keys;
Press MENU to enter the Direct IP Call mode;
Input the 12-digit target IP address (Please see example below);
Press the "More" softkey to make sure the softkey selection "IPv4" or "IPv6" is correctly selected
depending on your network environment;
Press "OK" softkey to dial.
For example:
If the target IP address is 192.168.1.60 and the port is 5062 (i.e., 192.168.1.60:5062), input the following:
192*168*1*60#5062. The * key represents the dot (.), the # key represents colon (:). Wait for about 4
seconds and the phone will initiate the call.
Quick IP Call Mode:
The GXP1160/GXP1165 also supports Quick IP Call mode. This enables the phone to make direct IP calls
using only the last few digits (last octet) of the target phone's IP address. This is possible only if both
phones are under the same LAN/VPN. This simulates a PBX function using the CMSA/CD without a SIP
server. Controlled static IP usage is recommended.
To enable Quick IP Call Mode, go to phone's Web GUI->Settings->Call Features, set "Use Quick IP Call
Mode" to "Yes". Click on "Save and Apply" on the bottom of the Web GUI page to take the change. To
make Quick IP Call, take the phone off hook first. Then dial #xxx where x is 0-9 and xxx<255. Press # or
SEND and a direct IP call to aaa.bbb.ccc.XXX will be completed. "aaa.bbb.ccc" is from the local IP address
regardless of subnet mask. The number #xx or #x are also valid. The leading 0 is not required (but it's OK).
For example:
192.168.0.2 calling 192.168.0.3 -- dial #3 followed by # or SEND key;
192.168.0.2 calling 192.168.0.23 -- dial #23 followed by # SEND key;
192.168.0.2 calling 192.168.0.123 -- dial #123 followed by # SEND key;
192.168.0.2: dial #3 and #03 and #003 results in the same call -- call 192.168.0.3.
Note:
The # will represent colon ":" in direct IP call rather than SEND key as in normal phone call;
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 21 of 63
If you have a SIP server configured, direct IP call still works. If you are using STUN, direct IP call will
also use STUN;
Configure the "User Random Port" to "No" when completing direct IP calls.
ANSWERING PHONE CALLS
RECEIVING CALLS
Single incoming call. Phone rings with selected ring tone. Answer call by taking handset off hook, or
using Speaker/Headset;
Multiple incoming calls. When another call comes in while having an active call, the phone will
produce a Call Waiting tone (stutter tone). Answer the incoming call by pressing the FLASH key
. The current active call will be put on hold automatically.
DO NOT DISTURB
Do Not Disturb can be enabled/disabled from phone's LCD MENU->Preference.
Press the Menu button and select "Preference" using navigation keys;
Press Menu button again to get into Preference options;
Select "Do Not Disturb" and press Menu button;
Use arrow keys "UP" and "DOWN" to select and press Menu button to enable or disable "Do Not
Disturb" feature.
When Do Not Disturb feature is turned on, the DND icon will appear on the right side of the LCD. The
incoming call will not be accepted or the call will directly go into voicemail.
DURING A PHONE CALL
CALL WAITING/CALL HOLD
Hold. Place a call on hold by pressing the HOLD key
;
Resume. Resume call by pressing the HOLD key
;
Multiple calls. Automatically place active call on hold or switch between calls by pressing the FLASH
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 22 of 63
key . Call waiting tone (stutter tone) will be audible on new incoming call during the active call.
MUTE
During an active call, press the MUTE softkey to mute/unmute the microphone. The LCD will show
"Talking" or "MUTE" to indicate the mute status, with Mute icon displayed on the right side of the screen.
CALL TRANSFER
GXP1160/GXP1165 supports Blind Transfer, Attended Transfer and Auto-Attended Transfer.
Blind Transfer.
During the first active call, press TRAN key
and dial the number to transfer to;
Press SEND key
or # to complete transfer of active call.
Attended Transfer.
During the first active call, press FLASH key
. The first call will be put on hold;
Enter the number for the second call in the new line and establish the call;
Press TRAN key
;
Press FLASH key
to transfer the call.
Auto-Attended Transfer.
Set "Auto-Attended Transfer" to "Yes" under Web GUI->Settings->Call Features. And then click
"Save and Apply" on the bottom of the page;
Establish one call first;
During the call, press TRAN key
. A new line will be brought up and the first call will be
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 23 of 63
automatically placed on hold;
Dial the number and press SEND key
or # to make a second call. (Once the number is
entered, a "Transfer" softkey will show. If "Transfer" softkey is pressed instead of SEND or #, a
blind transfer will be performed);
Press TRAN key
again. The call will be transferred.
For Auto-Attended Transfer, after dialing out the number for the second call, a "Split" softkey will
show. If the second call is not established yet (ringing), pressing "Split" will hang up the second call.
If the second call is established (answered), pressing "Split" will resume the second call and keep
the first call on hold.
Note:
To transfer calls across SIP domains, SIP service providers must support transfer across SIP domains.
3-WAY CONFERENCING
GXP1160/GXP1165 can host 3-way conference call with another 2 parties (PCMU/PCMA).
Initiate a conference call.
Establish calls with 2 parties respectively;
Press CONF key
;
Press FLASH key
. The 3-way conference will be established.
Cancel Conference.
If after pressing the CONF key
, the user decides not to conference, press Cancel
softkey;
This will resume the 2-way conversation with the current line.
Split and Re-conference.
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 24 of 63
During the conference, press HOLD key. The conference call will be split and the calls will be put
on hold separately;
Press FLASH key
to resume the 2-way conversation with the second established call;
If users would like to re-establish conference call, before FLASH key
is pressed in the
above step, press the ReConf softkey right after the conference call is held/split;
End Conference.
Press HOLD key
to split the conference call. The conference call will be ended with both
calls on hold; Or
Users could press the EndCall softkey or simply hang up the call to terminate the conference call.
GXP1160/GXP1165 supports Easy Conference Mode, which can be used combined with the traditional
way to establish the conference.
Initiate a conference call.
Establish 1 call;
Press CONF key
and a new line will be brought up;
Dial the number and press SEND key
to establish the second call;
Press CONF key
or press the ConfCall softkey to establish the conference.
Split and Re-conference.
During the conference, press HOLD key
. The conference call will be split and both calls
will be put on hold separately;
Press FLASH key
to resume the 2-way conversation with the second established call;
If users would like to re-establish conference call, press the ReConf softkey.
Cancel Conference.
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 25 of 63
If users decides not to conference after establishing the second call, press EndCall softkey;
This will end the second call and the screen will show the first call on hold.
End Conference.
Press HOLD key
to split the conference call. The conference call will be ended with both
calls on hold; Or
Users could press the EndCall softkey or simply hang up the call to terminate the conference call.
Note:
The party that starts the conference call has to remain in the conference for its entire duration, you can
put the party on mute but it must remain in the conversation. Also, this is not applicable when the
feature "Transfer on Conference Hangup" is turned on.
The option "Disable Conference" has to be set to "No" to establish conference.
When using Easy Conference Mode, use SEND key
to dial out the second call instead of
using #, even when # could be used as SEND in normal phone calls.
VOICE MESSAGES (MESSAGE WAITING INDICATOR)
A blinking red MWI (Message Waiting Indicator) indicates a message is waiting. Dial into the voicemail box
to retrieve the message by entering the voice mail number of the server or pressing the MESSAGE key
(Voice Mail User ID has to be properly configured as the voice mail number under Web
GUI->Account x->General Settings). An IVR will prompt the user through the process of message retrieval.
CALL FEATURES
The GXP1160/GXP1165 supports traditional and advanced telephony features including caller ID, caller ID
with caller Name, call forward and etc.
Table 7: CALL FEATURES
*30
Block Caller ID (for all subsequent calls)
Off hook the phone;
Dial *30.
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 26 of 63
*31
Send Caller ID (for all subsequent calls)
Off hook the phone;
Dial *31.
*67
Block Caller ID (per call)
Off hook the phone;
Dial *67 and then enter the number to dial out.
*82
Send Caller ID (per call)
Off hook the phone;
Dial *82 and then enter the number to dial out.
*70
Disable Call Waiting (per Call)
Off hook the phone;
Dial *70 and then enter the number to dial out.
*71
Enable Call Waiting (per Call)
Off hook the phone;
Dial *71 and then enter the number to dial out.
*72
Unconditional Call Forward. To set up unconditional call forward:
Off hook the phone;
Dial *72 and then enter the number to forward the call;
Press OK softkey or SEND key.
*73
Cancel Unconditional Call Forward. To cancel the unconditional call forward:
Off hook the phone;
Dial *73;
Hang up the call.
*90
Busy Call Forward. To set up busy call forward:
Off hook the phone;
Dial *90 and then enter the number to forward the call;
Press OK softkey or SEND key.
*91
Cancel Busy Call Forward. To cancel the busy call forward:
Off hook the phone;
Dial *91;
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 27 of 63
Hang up the call.
*92
Delayed Call Forward. To set up delayed call forward:
Off hook the phone;
Dial *92 and then enter the number to forward the call;
Press OK softkey or SEND key.
*93
Cancel Delayed Call Forward. To cancel the delayed call forward:
Off hook the phone;
Dial *93;
Hang up the call.
CUSTOMIZED LCD SCREEN & XML
The GXP1160/GXP1165 IP phone supports the following XML applications. Please refer to the
corresponding link for documentation and templates.
XML custom idle screen (customize idle screen logo, softkey layout, and etc.)
http://www.grandstream.com/products/gxp_series/general/documents/GXP2120/GXP2110/GXP2100_
14xx_XML_Screen_Customization.zip
XML downloadable phonebook
http://www.grandstream.com/products/gxp_series/general/documents/gxp_wp_xml_phonebook.pdf
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 28 of 63
CONFIGURATION GUIDE
The GXP1160/GXP1165 can be configured via two ways:
LCD Configuration Menu using the phone's keypad;
Web GUI embedded on the phone using PC's web browser.
CONFIGURATION VIA KEYPAD
To configure the LCD menu using phone's keypad, follow the instructions below:
Enter MENU options. When the phone is in idle, press the round MENU button to enter the
configuration menu;
Navigate in the menu options. Press the arrow keys UP/DOWN/LEFT/RIGHT to navigate in the menu
options;
Enter/Confirm selection. Press the round MENU button to enter the selected option;
Exit. Press LEFT arrow key to exit to the previous menu;
The phone automatically exits MENU mode with an incoming call, when the phone is off hook or the
MENU mode if left idle for more than 60 seconds.
When the phone is in idle, pressing the navigation keys UP/DOWN/RIGHT can access the call history
entries:
UP - Missed Calls
DOWN - Dialed Calls
RIGHT - Answered Calls
The MENU options are listed in the following table.
Table 8: CONFIGURATION MENU
Call History
Displays call logs for answered calls, dialed calls, missed calls, transferred calls
and forwarded calls.
Status
Displays network status, account registration status, software version number,
MAC address, hardware version number, P/N number.
Network status
Press to enter the
sub menu for IP setting information (DHCP/Static
IP/PPPoE), IPv4 address, IPv6 address, MAC address,
Subnet Mask,
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 29 of 63
Gateway and DNS server.
Account X: Registered/Not Registered.
Boot version
Prog version: This is the main firmware release number.
Core version
Base version
Aux version
DSP version
MAC address
HW version
P/N number
Phone Book
Displays phonebook. Users could add, edit, search and delete contacts/groups
here, or download phonebook XML to the phone.
LDAP Directory
Searches LDAP directory and configures LDAP options.
Instant Messages
Displays received instant messages.
Direct IP Call
Makes direct IP call.
Preference
Preference sub menu includes the following options:
Do Not Disturb
Enables/disables Do Not Disturb on the phone.
Forward Call
Configures call forward feature on selected account, forward type and number.
Ring Tone
Configures different ring tones for incoming call.
Ring Volume
Adjusts ring volume by pressing left/right arrow key.
LCD Contrast
Adjusts LCD contrast by pressing left/right arrow key.
Download SCR XML
Triggers the phone to download the XML idle screen file immediately. The XML
idle screen server path and downloading method need to be set up correctly
from Web GUI first.
Erase Custom SCR
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 30 of 63
Erases custom XML idle screen previously loaded on the phone. After erasing
it, the phone will show default idle screen.
Display Language
Selects the language to be displayed on the phone's LCD. Users could select
Automatic for local language based on IP location if available.
Time Settings
Configures date and time on the phone.
Star Key Lock
Turns on/off keypad lock feature and configures keypad lock password.
Config
Config sub menu includes the following options:
SIP
Configures SIP Proxy, Outbound Proxy, SIP User ID, SIP Auth ID, SIP
Password, SIP Transport and Audio information to register SIP account on the
phone.
Upgrade
Configures firmware server and config server for upgrading and provisioning
the phone.
Factory Reset
Resets the phone to factory default settings.
Layer 2 QoS
Configures 802.1Q/VLAN Tag and priority value.
Headset Type
Selects the headset type "Normal" or "Plantronics EHS" used on the phone.
Factory Functions
Factory Functions sub menu includes the following options:
Audio Loopback
Speak to the phone using speaker/handset/headset. If you can
hear your
voice, your audio is working fine. Press Menu button to exit audio loopback
mode.
Diagnostic Mode
All LEDs will light up. Press any key (except MENU key) on the keypad to
display the button name in the LCD. Lift and put back the handset or press
Menu button to exit diagnostic mode.
Keyboard Diagnostic
Press all the available keys on the phone. The LCD will display the name for
the keys to be pressed to finish the keyboard diagnostic mode.
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 31 of 63
Network
Selects IP mode (DHCP/Static IP/PPPoE); Configures PPPoE
account ID and
password; Configures IP address, Netmask,
Gateway, DNS Server 1 and DNS
Server 2; Configures 802.1X mode.
Call Features
Configures call forward features for Forward All,
Forward Busy, Forward No
Answer and No Answer Timeout.
Voice Mails
Displays voicemail message information in the format below:
new messages/all messages (urgent messages/all urgent messages)
Reboot
Reboot the phone.
Exit
Exit from this menu.
The following picture shows the keypad MENU configuration flow.
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 32 of 63
Figure 3: Keypad MENU Flow
Call History
Status
Phone Book
LDAP
Directory
Instant
Messages
Direct IP Call
Preference
Config
Factory
Functions
Network
Call Features
Voice Mails
Reboot
Exit
MENU
Answered Calls
Dialed Calls
Missed Calls
Transferred Calls
Forwarded Calls
Clear All
Back
Groups
New Entry
Search
Download Phonebook XML
Delete All Entries
Back
First Name
Last Name
Number
Acct
Groups
Confirm Add
Cancel & Return
Search
LDAP Configuration
Back
Server Address
Port
Base
User Name
Password
LDAP Number Filter
LDAP Name Filter
LDAP Version
...
Forward Call
Ring Tone
Ring Volume
LCD Contrast
Download SCR XML
Erase Custom SCR
Display Language
Time Settings
Star Key Lock
Back
SIP
Upgrade
Factory Reset
Layer 2 QoS
Headset Type
Back
Audio Loopback
Diagnostic Mode
Keyboard Diagnostic
Enable DND
Disable DND
Back
Default Ring
Ring1
Ring2
Ring 3
Back
Account
SIP Proxy
Outbound Proxy
SIP User ID
SIP Auth ID
SIP Password
SIP Transport
Audio
Save
Cancel
Firmware Server
Config Server
Upgrade Via
Back
802.1Q/VLAN Tag
Priority value
Reset Vlan Config
Back
IP Setting
PPPoE Settings
IP
Netmask
Gateway
DNS Server 1
DNS Server 2
802.1X
Back
Forward All
Forward Busy
Forward No Answer
No Answer Timeout
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 33 of 63
CONFIGURATION VIA WEB BROWSER
The GXP1160/GXP1165 embedded Web server responds to HTTP/HTTPS GET/POST requests.
Embedded HTML pages allow a user to configure the IP phone through a Web browser such as Microsoft’s
IE, Mozilla Firefox and Google Chrome.
To access the Web GUI:
1. Connect the computer to the same network as the phone;
2. Make sure the phone is turned on and shows its IP address. You may check the IP address on the
LCD by pressing NextScr softkey or go to MENU->Status;
3. Open a Web browser on your computer;
4. Enter the phone’s IP address in the address bar of the browser;
5. Enter the administrators login and password to access the Web Configuration Menu.
Note:
The computer has to be connected to the same sub-network as the phone. This can be easily done by
connecting the computer to the same hub or switch as the phone connected to. In absence of a
hub/switch (or free ports on the hub/switch), please connect the computer directly to the PC port on the
back of the phone;
If the phone is properly connected to a working Internet connection, the IP address of the phone will
display in MENU->Status. This address has the format: xxx.xxx.xxx.xxx, where xxx stands for a
number from 0-255. Users will need this number to access the Web GUI. For example, if the phone
has IP address 192.168.40.154, please enter "http://192.168.40.154" in the address bar of the
browser;
The default login name for the administrator is "admin". The default administrator password is set to
"admin". The default end user password is set to "123".
When changing any settings, always SUBMIT them by pressing the "Save" or "Save and Apply" button
on the bottom of the page. If the change is saved only but not applied, after making all the changes,
click on the "APPLY" button on top of the page to submit. After submitting the changes in all the Web
GUI pages, reboot the phone to have the changes take effect if necessary (All the options under
"Accounts" page and "Phonebook" page do not require reboot. Most of the options under "Settings"
page do not require reboot).
DEFINITIONS
This section describes the options in the phone's Web GUI. As mentioned, you can log in as an
administrator or an end user.
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 34 of 63
Status: Displays the Account status, Network status, and System Info of the phone;
Account: To configure the SIP account;
Network: To configure network settings;
Settings: To configure call features, ring tone, LCD display, Web services, XML applications and etc;
Maintenance: To configure web/Telnet access, upgrading and provisioning, language settings,
TR-069, security and etc.
STATUS PAGE DEFINITIONS
Status -> Account Status
SIP User ID Displays the configured SIP User ID.
SIP Server Displays the configured SIP Server address.
SIP Registration Displays SIP registration status YES/NO.
Status -> Network Status
MAC Address
Global unique ID of device, in HEX format. The MAC address will be used for
provisioning and can be found on the label coming with original box and on the
label located on the back of the device.
IP Setting DHCP, Static IP or PPPoE.
IPv4 Address The IPv4 address obtained on the phone.
IPv6 Address The IPv6 address obtained on the phone.
Subnet Mask The subnet mask obtained on the phone.
Gateway The gateway address obtained on the phone.
DNS Server 1 The DNS server address 1.
DNS Server 2 The DNS server address 2.
PPPoE Link Up PPPoE connection status.
NAT Traversal NAT traversal status for the account.
Status -> System Info
Product Model Product model of the phone.
Part Number Product part number.
Software Version
Boot: boot version number;
Core: core version number;
Base: base version number;
Prog: program version number. This is the main firmware release number,
which is always used for identifying the software system of the phone;
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 35 of 63
Aux: Aux version number;
Dsp: DSP version number.
System Up Time System up time since the last reboot.
System Time Current system time on the phone system.
Service Status GUI and Phone service status.
Core Dump Core dump file that could be downloaded for troubleshooting purpose.
ACCOUNTS PAGE DEFINITIONS
Account x -> General Settings
Account Active Activates/deactivates account. The default setting is "Yes".
Account Name The name associated with the SIP account.
SIP Server
The URL or IP address, and port of the SIP server. This is provided by your
VoIP service provider (ITSP).
Secondary SIP Server
The URL or IP address, and port of the SIP server. This will be used when the
primary SIP server fails.
Outbound Proxy
IP address or Domain name of the Primary Outbound Proxy, Media Gateway,
or Session Border Controller. It's used by the phone for Firewall or NAT
penetration in different network environments. If a symmetric NAT is detected,
STUN will not work and ONLY an Outbound Proxy can provide a solution.
SIP User ID
User account information, provided by your VoIP service provider (ITSP). It's
usually in the form of digits similar to phone number or actually a phone
number.
Authenticate ID
SIP service subscriber's Authenticate ID used for authentication. It can be
identical to or different from the SIP User ID.
Authenticate Password
The account password required for the phone to authenticate with the ITSP
(SIP) server before the account can be registered. After it is saved, this will
appear as hidden for security purpose.
Name
The SIP server subscriber's name (optional) that will be used for Caller ID
display.
Voice Mail User ID
Allows you to access voice messages by pressing the MESSAGE button on
the phone. This ID is usually the VM portal access number. For example, in
Asterisk server, 8500 could be used.
Account x -> Network Settings
DNS Mode
This parameter controls how the Search Appliance looks up IP addresses for
hostnames. There are four modes: A Record, SRV, NATPTR/SRV
, Use
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 36 of 63
Configured IP. The default setting is "A Record". If the user wishes to locate
the server by DNS SRV, the user may select "SRV" or "NATPTR/SRV". If "Use
Configured IP" is selected, please fill in the three fields below:
Primary IP: The primary IP address where the phone sends DNS query
to;
Backup IP 1;
Backup IP 2.
NAT Traversal
This parameter configures whether the NAT traversal mechanism is activated.
Users could select the mechanism from No, STUN, Keep-Alive, UPnP, Auto or
VPN. If set to "STUN" and STUN server is configured, the phone will route
according to the STUN server. If NAT type is Full Cone, Restricted Cone or
Port-Restricted Cone, the phone will try to use public IP addresses and port
number in all the SIP&SDP messages. The phone will send empty SDP packet
to the SIP server periodically to keep the NAT port open if it is configured to be
"Keep-Alive". Configure this to be "No" if an outbound proxy is used. "STUN"
cannot be used if the detected NAT is symmetric NAT.
Proxy-Require
A SIP Extension to notify the SIP server that the phone is behind a
NAT/Firewall. Do not configure this parameter unless this feature is supported
on the SIP server.
Account x -> SIP Settings -> Basic Settings
TEL URI
If the phone has an assigned PSTN telephone number, this field should be set
to "User=Phone". Then a "User=Phone" parameter will be attached to the
Request-Line and "TO" header in the SIP request to indicate the E.164
number. If set to "Enable", "Tel:" will be used instead of "SIP:" in the SIP
request. The default setting is "Disable".
SIP Registration
Selects whether or not the phone will send SIP Register messages to the
proxy/server. The default setting is "Yes".
Unregister On Reboot
If set to "Yes", the SIP user's registration information will be cleared when the
phone reboots. The SIP Contact header will contain "*" to notify the server to
unbind the connection. The default setting is "No".
Register Expiration
Specifies the frequency (in minutes) in which the phone refreshes its
registration with the specified registrar. The default value is 60 minutes. The
maximum value is 64800 minutes (about 45 days).
Reregister Before
Expiration
Specifies the time frequency (in seconds) that the phone sends
re-registration request before the Register Expiration. The default value is 0.
Local SIP Port
Defines the local SIP port used to listen and transmit. The default value is
5060 for Account 1.
SIP Registration Failure Specifies the interval to retry registration if the process is failed. The default
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 37 of 63
Retry Wait Time value is 20 seconds.
SIP T1 Timeout SIP T1 Timeout. The default setting is 0.5 seconds.
SIP T2 interval SIP T2 Interval. The default setting is 4 seconds.
SIP Transport
Determines the network protocol used for the SIP transport. Users can choose
from TCP, UDP and TLS.
SIP URI Scheme when
using TLS
Specifies if "sip:" or "sips:" will be used when TLS/TCP is selected for SIP
Transport. The default setting is "sips:".
Use Actual Ephemeral
Port in Contact with
TCP/TLS
Defines whether the actual ephemeral port in contact with TCP/TLS will be
used or not. This is used when TLS/TCP is selected for SIP Transfer. The
default setting is "No".
Remove OBP from route
Configures to remove outbound proxy from route. This is used for the SIP
Extension to notify the SIP server that the device is behind a NAT/Firewall.
Support SIP Instance ID
Defines whether SIP Instance ID is supported or not. The default setting is
"Yes".
SUBSCRIBE for MWI
When set to "Yes", a SUBSCRIBE for Message Waiting Indication will be sent
periodically. The phone supports synchronized and non-
synchronized MWI.
The default setting is "No".
SUBSCRIBE for
Registration
When set to "Yes", a SUBSCRIBE for Registration will be sent out periodically.
The default setting is "No".
Enable 100rel
The use of the PRACK (Provisional Acknowledgment) method enables
reliability to SIP provisional responses (1xx series). This is very important in
order to support PSTN internetworking. To invoke a reliable provisional
response, the 100rel tag is appended to the value of the required header of the
initial signaling messages.
Caller ID Display
When set to "Auto", the phone will look for the caller ID in the order of
P-Asserted Identity Header, Remote-Party-ID Header and From Header in the
incoming SIP INVITE. When set to "Disabled", all incoming calls are displayed
with "Unavailable". When set to "From Header", the phone will display the
caller ID based on the From Header in the incoming SIP INVITE. The default
setting is "Auto".
Use Privacy Header
Controls whether the Privacy Header will present in the SIP INVITE message
or not. The default setting is "default", which is when "Huawei IMS" special
feature is on, the Privacy Header will not show in INVITE. If set to "Yes", the
Privacy Header will always show in INVITE. If set to "No", the Privacy Header
will not show in INVITE.
Use P-Preferred-Identity
Header
Controls whether the P-Preferred-
Identity Header will present in the SIP
INVITE message or not. The default setting is "default", which
is when
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 38 of 63
"Huawei IMS" special feature is on, the P-Preferred-Identity Header will not
show in INVITE. If set to "Yes", the P-Preferred-
Identity Header will always
show in INVITE. If set to "No", the P-Preferred-Identity Header will not show in
INVITE.
Account x -> SIP Settings -> Advanced Features
Broadsoft Call Center
When set to "Yes", Feature Key Synchronization will be enabled regardless of
web settings. The default setting is "No".
Hoteling Event Enables Broadsoft Hoteling event feature. The default setting is "No".
Call Center Status
When set to "Yes", the phone will send SUBSCRIBE to the server to obtain call
center status. The default setting is "No".
Publish to Call Center
When set to "Yes", users could select "Away", "Online" or "Busy" from LCD
menu and publish it to call center. The default setting is "No".
Feature Key
Synchronization
This feature is used for Broadsoft call feature synchroniza
tion. When it's
enabled, DND and Call Forward features can be synchronized with Broadsoft
server. The default setting is "Disabled".
Line Seize Timeout
Defines the interval (in seconds) before the line can be seized when Shared
Line is used. The default value is 15 seconds.
Conference URI Configures the conference URI when using Broadsoft N-way calling feature.
Music On Hold URI
Configures Music On Hold URI to call when a call is on hold. This feature has
to be supported on the server side.
PUBLISH for Presence Enables presence feature on the phone. The default setting is "No".
Special Feature
Different soft switch vendors have special requirements. Therefore users may
need select special features to meet these requirements. Users can choose
from Standard, Nortel MCS, Broadsoft, CBCOM, RNK, Sylantro or Huawei IMS
depending on the server type. The default setting is "Standard".
Account x -> SIP Settings -> Session Timer
Session Expiration
The SIP Session Timer extension that enables SIP sessions to be periodically
"refreshed" via a SIP request (UPDATE, or re-INVITE). If there is no refresh
via an UPDATE or re-INVITE message, the session will be terminated once
the session interval expires. Session Expiration is the time (in seconds) where
the session is considered timed out, provided no successful session refresh
transaction occurs beforehand. The default value is 180 seconds.
Min-SE
The minimum session expiration (in seconds). The default v
alue is 90
seconds.
Caller Request Timer
If set to "Yes" and the remote party supports session timers, the phone will use
a session timer when it makes outbound calls.
Callee Request Timer If set to "Yes" and the remote party supports session timers, the phone will use
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 39 of 63
a session timer when it receives inbound calls.
Force Timer
If Force Timer is set to "Yes", the phone will use the session timer even if the
remote party does not support this feature. If Force Timer is set to "No", the
phone will enable the session timer only when the remote party supports this
feature. To turn off the session timer, select "No".
UAC Specify Refresher
As a Caller, select UAC to use the phone as the refresher; or select UAS to
use the Callee or proxy server as the refresher.
UAS Specify Refresher
As a Callee, select UAC to use caller or proxy server as the refresher; or select
UAS to use the phone as the refresher.
Force INVITE
The Session Timer can be refreshed using the INVITE method or the UPDATE
method. Select "Yes" to use the INVITE method to refresh the session timer.
Account x -> SIP Settings -> Security Settings
Check Domain
Certificates
Defines whether the domain certificates will be checked or not when TLS/TCP
is used for SIP Transport. The default setting is "No".
Validate Incoming
Messages
Defines whether the incoming messages will be validated or not. The default
setting is "No".
Check SIP User ID for
incoming INVITE
If set to "Yes", SIP User ID will be checked in the Request URI of the incoming
INVITE. If it doesn't match the phone's SIP User ID, the call will be rejected.
The default setting is "No".
Accept Incoming SIP
from Proxy Only
When set to "Yes", the SIP address of the Request URL in the incoming SIP
message will be checked. If it doesn't match the SIP server address of the
account, the call will be rejected. The default setting is "No".
Authenticate Incoming
INVITE
If set to "Yes", the phone will challenge the incoming INVITE for authentication
with SIP 401 Unauthorized response. The default setting is "No".
Account x -> Audio Settings
Send DTMF
Specifies the mechanism to transmit DTMF digits. There are 3 supported
modes: in audio which means DTMF is combined in the audio signal (not very
reliable with low-bit-rate codecs), via RTP (RFC2833), or via SIP INFO.
DTMF Payload Type
Configures the payload type for DTMF using RFC2833. The default value is
101.
Preferred Vocoder
7 different vocoder types are supported on the phone, including G.711 U-law
(PCMU), G.711 A-law (PCMA), G.723.1, G.729A/B, G.722 (wide band), iLBC
and G726-32
. Users can configure vocoders in a preference list that is
included with the same preference order in SDP message.
Use First Matching
Vocoder in 200OK SDP
When set to "Yes", the device will use the first matching vocoder
in the
received 200OK SDP as the codec. The default setting is "No".
SRTP Mode Enables the SRTP mode based on your selection.
The default setting is
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 40 of 63
"Disabled".
Symmetric RTP
Defines whether symmetric RTP is supported or not. The default setting is
"No".
Silence Suppression
Controls the silence suppression/VAD feature of the audio codec G.723 and
G.729. If set to "Yes", when silence is detected, a small quantity of VAD
packets (instead of audio packets) will be sent during the period of no talking.
If set to "No", this feature is disabled. The default setting is "No".
Voice Frames Per TX
Configures the number of voice frames transmitted per packet. When
configuring this, it should be noted that the "ptime" value for the SDP will
change with different configurations here. This value is related to the codec
used and the actual frames transmitted during the in payload call. For end
users, it is recommended to use the default setting, as incorrect settings may
influence the audio quality.
G723 Rate Selects encoding rate for G723 codec. The default value is 5.3kbps.
G.726-32 Packing Mode Selects "ITU" or "IETF" for G726-32 packing mode.
iLBC Frame Size Selects iLBC packet frame size. The default value is 30ms.
iLBC Payload Type
Specifies iLBC Payload type. The default value
is 97. The valid range is
between 96 and 127.
Jitter Buffer Type
Selects either Fixed or Adaptive based on network conditions. The default
setting is "Adaptive".
Jitter Buffer Length
Selects Low, Medium, or High based on network conditi
ons. The default
setting is "Medium".
Account x -> Call Settings
Early Dial
Selects whether or not to enable early dial. If it's set to "Yes", the SIP proxy
must support 484 response. The default setting is "No".
Dial Plan Prefix Sets the prefix added to each dialed number.
Dial Plan
A dial plan establishes the expected number and pattern of digits for a
telephone number. This parameter configures the allowed dial
plan for the
phone.
Dial Plan Rules:
1. Accepted Digits: 1,2,3,4,5,6,7,8,9,0 , *, #, A,a,B,b,C,c,D,d;
2. Grammar: x - any digit from 0-9;
a) xx+ - at least 2 digit numbers
b) xx. - only 2 digit numbers
c) ^ - exclude
d) [3-5] - any digit of 3, 4, or 5
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 41 of 63
e) [147] - any digit of 1, 4, or 7
f) <2=011> - replace digit 2 with 011 when dialing
g) | - the OR operand
Example 1: {[369]11 | 1617xxxxxxx}
Allow 311, 611, and 911 or any 10 digit numbers with leading digits 1617;
Example 2: {^1900x+ | <=1617>xxxxxxx}
Block any number of leading digits 1900 or add prefix 1617 for any dialed 7
digit numbers;
Example 3: {1xxx[2-9]xxxxxx | <2=011>x+}
Allows any number with leading digit 1 followed by a 3 digit number, followed
by any number between 2 and 9, followed by any 7 digit number OR Allows
any length of numbers with leading digit 2, replacing the 2 with 011 when
dialed.
Example of a simple dial plan used in a Home/Office in the US:
{ ^1900x. | <=1617>[2-9]xxxxxx | 1[2-9]xx[2-9]xxxxxx | 011[2-9]x. | [3469]11 }
Explanation of example rule (reading from left to right):
^1900x. - prevents dialing any number started with 1900;
<=1617>[2-9]xxxxxx - allows dialing to local area code (617) numbers by
dialing 7 numbers and 1617 area code will be added automatically;
1[2-9]xx[2-9]xxxxxx |- allows dialing to any US/Canada Number with 11
digits length;
011[2-9]x - allows international calls starting with 011;
[3469]11 - allows
dialing special and emergency numbers 311, 411, 611
and 911.
Note:
In some cases where the user wishes to dial strings such as *123 to activate
voice mail or other applications provided by their service provider, the * should
be predefined inside the dial plan feature. An example dial plan will be: { *x+ }
which allows the user to dial * followed by any length of numbers.
Delayed Call Forward
Wait Time
Defines the timeout (in seconds) before the call is forwarded on no answer.
The default value is 20 seconds.
Enable Call Features
When enabled, Do No Disturb, Call Forward and other call features will be
supported locally provided ITSP support those features. The default setting is
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 42 of 63
"Yes". If set to "No", ForwardAll softkey will be hidden for Account 1.
Call Log
Configures Call Log setting on the phone. You can log all calls, only log
incoming/outgoing calls or disable call log. The default setting is
"Log All
Calls".
Account Ring Tone
Allows users to configure the ringtone for the account. Users can choose from
different ringtones from the dropdown menu.
Matching Incoming
Caller ID
Specifies matching rules with number, pattern or Alert Info text. When the
incoming caller ID or Alert Info matches the rule, the phone will
ring with
selected distinctive ringtone. Matching rules:
Specific caller ID number. For example, 8321123;
A defined pattern with certain length using x and + to specify,
where x
could be any digit from 0 to 9. Samples:
xx+ : at least 2-digit number;
xx : only 2-digit number;
[345]xx: 3-digit number with the leading digit of 3, 4 or 5;
[6-9]xx: 3-digit number with the leading digit from 6 to 9.
Alert Info text
Users could configure the matching rule as certain text (e.g., priority) and
select the custom ring tone mapped to it. The custom ring tone will be
used if the phone receives SIP INVITE with Alert-
Info header in the
following format:
Alert-Info: <http://127.0.0.1>; info=priority
Selects the distinctive ring tone for the matching rule. When the incoming
caller ID or Alert Info matches the rule, the phone will ring with the selected
ring.
Ring Timeout
Defines the timeout (in seconds) for the rings on no answer. The default setting
is 60 seconds.
Send Anonymous
If set to "Yes", the "From" header in outgoing INVITE messages will be set to
anonymous, essentially blocking the Caller ID to be displayed.
Anonymous Call
Rejection
If set to "Yes", anonymous calls will be rejected. The default setting is "No".
Auto Answer
If set to "Yes", the phone will automatically turn on the speaker phone to
answer incoming calls after a short reminding beep.
Allow Auto Answer by
Call-Info
If set to "Yes", the phone will automatically turn on the speaker phone to
answer incoming calls after a short reminding beep, based on
the SIP info
header sent from the server/proxy. The default setting is "No".
Refer-To Use Target If set to "Yes", the "Refer-
To" header uses the transferred target's Contact
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 43 of 63
Contact header information for attended transfer. The default setting is "No".
Transfer on Conference
Hangup
Defines whether or not the call is transferred to the other party if the initiator of
the conference hangs up. The default setting is "No".
No Key Entry Timeout (s)
Defines the timeout (in seconds) for no key entry. If no key is pressed after the
timeout, the digits will be sent out. The default value is 4 seconds.
Use # as Dial Key
Allows users to configure the "#" key as the "Send" key. If set to "Yes", the "#"
key will immediately dial out the input digits. In this case, this key is essentially
equivalent to the "Send" key. If set to "No", the "#" key is included as part of the
dialing string.
SETTINGS PAGE DEFINITIONS
Settings -> General Settings
Local RTP Port
This parameter defines the local RTP port used to listen and transmit. It
is the base RTP port for channel 0. When configured, channel 0 will use
this port _value for RTP; channel 1 will use port_value+2 for RTP. Local
RTP port ranges from 1024 to 65400 and must be even. The default
value is 5004.
Use Random Port
When set to "Yes", this parameter will force random generation of both
the local SIP and RTP ports. This is usually necessary when multiple
phones are behind the same full cone NAT. The default setting is "Yes"
(This parameter must be set to "No" for Direct IP Calling to work).
Keep-alive Interval
Specifies how often the phone sends a blank UDP packet to the SIP
server in order to keep the "ping hole" on the NAT router to open. The
default setting is 20 seconds.
Use NAT IP
The NAT IP address used in SIP/SDP messages. This field is blank at
the default settings. It should ONLY be used if it's required by your ITSP.
STUN Server
The IP address or Domain name of the STUN server. STUN resolution
results are displayed in the STATUS page of the Web GUI. Only
non-symmetric NAT routers work with STUN.
Public Mode
Configures to turn on/off public mode for hot desking feature on the
phone. If set to "Yes", users would need fill in the SIP Server address for
account 1 as well. Then reboot the phone. When the phone boots up,
users will need enter SIP User ID and Password on the LCD to login and
use the phone.
Note:
When the phone is in public mode login screen, press CONF button will
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 44 of 63
have the IP address of the phone displayed.
Settings -> Call Features
Off-hook Auto Dial
Configures a User ID/extension to dial automatically when the phone is
off hook. The phone will use the first account to dial out. The default
setting is "No".
Off-hook Timeout
If configured, when the phone is on hook, it will go off hook after the
timeout (in seconds). The default value is 30 seconds.
Disable Call Waiting Disables the call waiting feature. The default setting is "No".
Disable Call Waiting Tone
Disables the call waiting tone when call waiting is on. The default setting
is "No".
Disable Direct IP Call Disables Direct IP Call. The default setting is "No".
Use Quick IP Call mode
When set to "Yes", users can dial an IP address under the same
LAN/VPN segment by entering the last octet in the IP address. To dial
quick IP call, off hook the phone and dial #XXX (X is 0-
9 and XXX
<=255), phone will make direct IP call to aaa.bbb.ccc.XXX where
aaa.bbb.ccc comes from the local IP address REGARDLESS of subnet
mask. #XX or #X are also valid so leading 0 is not required (but OK). No
SIP server is required to make quick IP call. The default setting is "No".
Disable Conference Disables the Conference function. The default setting is "No".
Disable in-call DTMF Display
When it's set to "Yes", the DTMF digits entered during the call will not
display. The default setting is "No".
Enable MPK sending DTMF
Enables Multi Purpose Key to send DTMF during the call. The default
setting is "No".
Disable Transfer Disables the Transfer function. The default setting is "No".
In-call dial number on pressing
transfer key
Configures the number for the phone to dial as DTMF during the call
using TRAN button.
Auto-Attended Transfer
If set to "Yes", the phone will use attended transfer by default. The default
setting is "No".
Do Not Escape # as %23 in
SIP URI
Specifies whether to replace # by %23 or not for some special situations.
The default setting is "No".
Click-To-Dial Feature Enables Click-To-Dial feature. The default setting is "Disabled".
Call History Flash Writing:
Write Timeout
Defines the interval (in seconds) to save the call history to phone's flash.
The default value is 300 seconds.
Call History Flash Writing:
Max Unsaved Log
Defines the number of unsaved logs before written to phone's flash. The
default value is 200 entries.
Settings -> Ring Tone
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 45 of 63
Call Progresses Tones:
System Ring Tone
Dial Tone
Message Waiting
Ring Back Tone
Call-Waiting Tone
Busy Tone
Reorder Tone
Configures ring or tone frequencies based on parameters from local
telecom. The default value is North American standard. Frequencies
should be configured with known values to avoid u
ncomfortable high
pitch sounds.
Syntax: f1=val,f2=val[,c=on1/off1[-on2/off2[-on3/off3]]];
(Frequencies are in Hz and cadence on and off are in 10ms)
ON is the period of ringing (“On time” in ‘ms’) while OFF is the period of
silence. In order to set a continuous ring, OFF should be zero. Otherwise
it will ring ON ms and a pause of OFF ms and then repeat the pattern. Up
to three cadences are supported.
Call Waiting Tone Gain
Configures the call waiting tone gain to adjust call waiting tone volume.
The default setting is "Low".
Settings -> Audio Control
Headset Key Mode
When headset is connected to the phone, users could use the HEADSET
button in "Default Mode" or "Toggle Headset/Speaker".
Default Mode:
When the phone is in idle, press HEADSET button to off hook
the phone and make calls by using headset. Headset icon will
display on the screen in dialing/talking status.
When there is an incoming call, press HEADSET button to pick
up the call using headset.
When there is an active call using headset, press HEADSET
button to hang up the call.
When Speaker/Handset is being used in dialing/talking status,
press HEADSET button to switch to headset. Press it again to
hang up the call. Or press speaker/Handset to switch back to the
previous mode.
Toggle Headst/Speaker:
When the phone is in idle, press HEADSET button to switch to
Headset mode. The headset icon will display on the left side of
the screen. In this mode, if pressing Speaker button or Line key
to off hook the phone, headset will be used.
When there is an active call, press HEADSET button to toggle
between Headset and Speaker.
Headset Type
Selects headset type from Normal RJ9 headset or Plantronics EHS
headset. The default setting is "Normal".
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 46 of 63
Always Ring Speaker
Configures to enable or disable the speaker to ring when headset is used
on "Toggle Headset/Speaker" mode. If set to "Yes", when the phone is in
Headset "Toggle Headset/Speaker" mode, both headset and speaker will
ring on incoming call. The default setting is "No".
Headset TX gain
Configures the transmission gain of the headset. The default value is
0dB.
Headset RX gain Configures the receiving gain of the headset. The default value is 0dB.
Handset TX gain
Configures the transmission gain of the handset. The default value is 0
dB.
Settings -> LCD Display
LCD Contrast Configures the LCD contrast level (from 0 to 20). The default value is 10.
Settings -> Date and Time
NTP Server
Defines the URL or IP address of the NTP server. The phone may obtain
the date and time from the server.
Allow DHCP Option 42
Override NTP Server
Defines whether DHCP Option 42 should override NTP server or not.
When enabled, DHCP Option 42 will override the NTP server if it's set up
on the LAN. The default setting is "Yes".
Time Zone
Configures the date/time used on the phone according to the specified
time zone.
Self-Defined Time Zone
This parameter allows the users to define their own time zone.
The syntax is: std offset dst [offset], start [/time], end [/time]
Default is set to: MTZ+6MDT+5,M4.1.0,M11.1.0
MTZ+6MDT+5
This indicates a time zone with 6 hours offset with 1 hour ahead which is
U.S central time. If it is positive (+) if the local time zone is west of the
Prime Meridian (A.K.A: International or Green
wich Meridian) and
negative (-) if it is east.
M4.1.0,M11.1.0
The 1st number indicates Month: 1,2,3.., 12 (for Jan, Feb, .., Dec)
The 2nd number indicates the nth iteration of the weekday: (1st Sunday,
3
rd
Tuesday…)
The 3rd number indicates weekday: 0,
1,2,..,6( for Sun, Mon,
Tues, ... ,Sat)
Therefore, this example is the DST which starts from the First Sunday of
April to the 1st Sunday of November.
Date Display Format Configures the date display format on the LCD. The following formats are
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 47 of 63
supported:
yyyy-mm-dd: 2012-07-02
mm-dd-yyyy: 07-02-2012
dd-mm-yyyy: 02-07-2012
dddd, MMMM dd: Friday, October 12
MMMM dd, dddd: October 12, Friday
Time Display Format
Configures the time display in 12-hour or 24-hour format on the LCD. The
default setting is in 12-hour format.
Settings -> Web Service
Enable Weather Update
Configures to enable or disable weather update on the phone. The
default setting is "Yes". If set to "No", the weather information screen will
not show.
City Code
Configures weather city code fo
r the phone to look up the weather
information. The default setting is "Automatic" and the weather
information will be obtained based on the IP location of the phone if
available. Otherwise, specify the self-defined city code. For example,
USCA0638 is the city code for Los Angeles, CA, United States.
Update Interval
Specifies the weather update interval (in minutes). The default value is
15 minutes.
Degree Unit
Specifies the degree unit for the weather information to display on the
phone.
Settings -> XML Applications
Idle Screen XML Download
Configures to enable idle screen XML download. Users could select
HTTP/HTTPS/TFTP to download the XML idle screen file. The default
setting is "No".
Download Screen XML At
Bootup
If set to "Yes", the idle screen XML
file will be downloaded when the
phone boots up. The default setting is "No".
User Custom Filename Specifies the custom file for the idle screen XML file to be downloaded.
Idle Screen XML Server Path
Configures the server path to download the idle screen XML file. This
field could be IP address or URL, with up to 256 characters.
NETWORK PAGE DEFINITIONS
Network -> Basic Settings
Internet Protocol Selects Prefer IPv4 or Prefer IPv6.
IPv4 Address Type
Allows users to configure the appropriate network settings on the phone
to obtain IPv4 address
. Users could select "DHCP", "Static IP" or
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 48 of 63
"PPPoE". By default, it is set to "DHCP".
DHCP Host name (Option 12)
Specifies the name of the client. This field is optional but may be required
by some Internet Service Providers.
DHCP Vendor Class ID
(Option 60)
Used by clients and servers to exchange vendor class ID.
PPPoE Account ID Enter the PPPoE account ID.
PPPoE Password Enter the PPPoE Password.
PPPoE Service Name Enter the PPPoE Service Name.
IPv4 Address Enter the IP address when static IP is used.
Subnet Mask Enter the Subnet Mask when static IP is used for IPv4.
Gateway Enter the Default Gateway when static IP is used for IPv4.
DNS Server 1 Enter the DNS Server 1 when static IP is used for IPv4.
DNS Server 2 Enter the DNS Server 2 when static IP is used for IPv4.
Preferred DNS Server Enter the Preferred DNS Server for IPv4.
IPv6 Address Type
Allows users to configure the appropriate network settings on the phone
to obtain IPv6 address. Users could select "Auto-
configured" or
"Statically configured" for the IPv6 address type.
Static IPv6 Address
Enter the static IPv6 address when Full Static is used in "Statically
configured" IPv6 address type.
IPv6 Prefix Length
Enter the IPv6 prefix length whe
n Full Static is used in "Statically
configured" IPv6 address type.
IPv6 Prefix
Enter the IPv6 Prefix (64 bits) when Prefix Static is used in "Statically
configured" IPv6 address type.
DNS Server 1 Enter the DNS Server 1 for IPv6.
DNS Server 2 Enter the DNS Server 2 for IPv6.
Preferred DNS server Enter the Preferred DNS Server for IPv6.
Network -> Advanced Settings
802.1X mode
Allows the user to enable/disable 802.1X
mode on the phone. The
default value is disabled. To enable 802.1X mode, this field should be set
to EAP-MD5.
802.1X Identity Enter the Identity for the 802.1X mode.
MD5 Password Enter the MD5 Password for the 802.1X mode.
802.1X CA Certificate
Upload 802.1X CA certificate to the phone; or delete existed 802.1X CA
certificate from the phone.
802.1X Client Certificate Upload 802.1X Client certificate to the phone; or delete existed 802.1X
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 49 of 63
Client certificate from the phone.
HTTP Proxy
Specifies the HTTP proxy URL for the phone to send packets to. The
proxy server will act as an intermedi
ary to route the packets to the
destination.
HTTPS Proxy
Specifies the HTTPS proxy URL for the phone to send packets to. The
proxy server will act as an intermediary to route the packets to the
destination.
Layer 3 QoS
Defines the Layer 3 QoS parameter.
This value is used for IP
Precedence, Diff-Serv or MPLS. The default value is 12.
Layer 2 QoS 802.1Q/VLAN
Tag
Assigns the VLAN Tag of the Layer 2 QoS packets. The default value is
0.
Layer 2 QoS 802.1p Priority
Value
Assigns the priority value of the Layer2 QoS packets. The default value is
0.
PC Port Mode
Configures the PC port mode. When set to "Mirrored", the traffic in the
LAN port will go through PC port as well and packets can be captured by
connecting a PC to the PC port. The default setting is "Enable".
MAINTENANCE PAGE DEFINITIONS
Maintenance -> Web/Telnet Access
Disable Telnet Disables Telnet access. The default setting is "No".
End User Password
Allows the administrator to set the password for user-level web GUI access.
This field is case sensitive with a maximum length of 30 characters.
Confirm Password Confirms the end user password field to be the same as above.
Admin Password
Allows users to change the admin password. The password field is purposely
hidden after clicking the Update button for security purpose. This field is case
sensitive with a maximum length of 30 characters.
Confirm Password Confirms the admin password field to be the same as above.
Maintenance -> Upgrade and Provisioning
Firmware Upgrade and
Provisioning
Specifies how firmware upgrading and provisioning request to be sent: Always
Check for New Firmware, Check New Firmware
only when F/W pre/suffix
changes, Always Skip the Firmware Check.
XML Config File
Password
The password for encrypting the XML configuration file using OpenSSL. This
is required for the phone to decrypt the encrypted XML configuration file.
HTTP/HTTPS User
Name
The user name for the HTTP/HTTPS server.
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 50 of 63
HTTP/HTTPS Password The password for the HTTP/HTTPS server.
Upgrade Via Allows users to choose the firmware upgrade method: TFTP, HTTP or HTTPS.
Firmware Server Path
Defines the server path for the firmware server. It could be different from the
configuration server for provisioning.
Config Server Path
Defines the server path for provisioning. It could be different from the firmware
server for upgrading.
Firmware File Prefix
Enables your ITSP to lock firmware updates. If configured, only the firmware
with the matching encrypted prefix will be downloaded and flashed into the
phone.
Firmware File Postfix
Enables your ITSP to lock firmware updates. If configured, only the firmware
with the matching encrypted postfix will be downloaded and flashed into the
phone.
Config File Prefix
Enables your ITSP to lock configuration updates. If configured, onl
y the
configuration file with the matching encrypted prefix will be downloaded and
flashed into the phone.
Config File Postfix
Enables your ITSP to lock configuration updates. If configured, only the
configuration file with the matching encrypted postfix will be downloaded and
flashed into the phone.
Allow DHCP Option 43
and Option 66 Override
Server
If DHCP option 66 is enabled on the LAN side, the TFTP server can be
redirected. The default setting is "Yes".
Allow DHCP Option 120
to override SIP Server
Enables DHCP Option 120 from local server to override the SIP Server on the
phone. The default setting is "No".
Automatic Upgrade Enables automatic upgrade and provisioning. The default setting is "No".
Hour of the Day (0-23)
Defines the hour of the day to check the HTTP/TFTP server for firmware
upgrades or configuration files changes. The default value is 1.
Day of the Week (0-6)
Defines the day of the week to check HTTP/TFTP server for firmware
upgrades or configuration files changes. The default value is 1.
Authenticate Conf File Authenticates configuration file before acceptance. The default setting is "No".
Maintenance -> Syslog
Syslog Server The URL or IP address of the syslog server for the phone to send syslog to.
Syslog Level
Selects the level of logging for syslog. The default setting is "None". There are
4 levels: DEBUG, INFO, WARNING AND ERROR.
Syslog messages are sent based on the following events:
product model/version on boot up (INFO level);
NAT related info (INFO level);
sent or received SIP message (DEBUG level);
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 51 of 63
SIP message summary (INFO level);
inbound and outbound calls (INFO level);
registration status change (INFO level);
negotiated codec (INFO level);
ethernet link up (INFO level);
SLIC chip exception (WARNING and ERROR levels);
memory exception (ERROR level).
Send SIP Log
Configures whether the SIP log will be included in the syslog messages or not.
The default setting is "No".
Auto Recover From
Abnormal
Configures whether auto recover or not when the phone is running abnormal.
The default setting is "Yes".
Maintenance -> Language
Display Language Selects display language on the phone.
Language File Postfix Specifies the language file postfix for downloaded language.
Maintenance -> TR-069
Enable TR-069 Enables TR-069. The default setting is "No".
ACS URL URL for TR-069 Auto Configuration Servers (ACS).
TR-069 Username ACS username for TR-069.
TR-069 Password ACS password for TR-069.
Periodic Inform Enable
Enables periodic inform. If set to "Yes", device will send inform packets to the
ACS. The default setting is "No".
Periodic Inform Interval Sets up the periodic inform interval to send the inform packets to the ACS.
Connection Request
Username
The user name for the ACS to connect to the phone.
Connection Request
Password
The password for the ACS to connect to the phone.
Connection Request Port The port for the ACS to connect to the phone.
CPE SSL Certificate The Cert File for the phone to connect to the ACS via SSL.
CPE SSL Private Key The Cert Key for the phone to connect to the ACS via SSL.
Maintenance -> Security
Configuration via Keypad
Menu
Configures the access control for the users to configure from keypad Menu.
There are three different options:
Unrestricted. All the options can be accessed in keypad Menu.
Basic settings only. The CONFIG option will not display for users to
access in keypad Menu.
Constraint Mode
. CONFIG, FACTORY FUNCTIONS and NETWORK
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 52 of 63
options will not display for users to access in keypad menu.
Enable STAR key
Keypad locking
If set to "Yes", the keypad can be locked by pressing and holding the STAR *
key for about 4 seconds. A lock icon will show indicating the keypad is locked.
The default setting is "Yes".
Note:
When the keypad is locked, users would need press and hold the STAR * key
for about 4 seconds again and then enter the password to unlock it.
Password to lock/unlock
Configures the password to lock/unlock the keypad. The password field allows
number with up to 32 characters.
SSL TLS Certificate SSL Certificate used for SIP Transport in TLS/TCP.
SSL TLS Private Key SSL Private key used for SIP Transport in TLS/TCP.
SSL TLS Private Key
Password
SSL Private key password used for SIP Transport in TLS/TCP.
Download Device
Configuration
Click to download the device configuration file in .txt format.
PHONEBOOK PAGE DEFINITIONS
Phonebook -> Phonebook Management
Enable Phonebook XML
Download
Configures to enable phonebook XML download. Users could select
HTTP/HTTPS/TFTP to download the phonebook file. The default setting is
"Disabled".
Phonebook XML Server
Path
Configures the server path to download the phonebook XML. This field could
be IP address or URL, with up to 256 characters.
Phonebook Download
Interval
Configures the phonebook download interval (in minutes). If it's set to
0, the
automatic download will be disabled. The default value is 0. The valid range is
5 to 720 minutes.
Remove Manually-edited
Entries on Download
If set to "Yes", when XML phonebook is downloaded, the entries added
manually will be automatically removed. The default setting is "Yes".
Download XML
Phonebook
Click on "Download" to download the XML phonebook file to local PC.
Upload XML Phonebook Click on "Upload" to upload local XML phonebook file to the phone.
Phonebook -> LDAP
Server Address Configures the IP address or DNS name of the LDAP server.
Port Configures the LDAP server port.
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 53 of 63
Base
Configures the LDAP search base. This is the location in the directory where
the search is requested to begin.
Example:
dc=grandstream, dc=com
ou=Boston, dc=grandstream, dc=com
User Name
Configures the bind "Username" for querying LDAP servers. Some LDAP
servers allow anonymous binds in which case the setting can be left blank.
Password
Configures the bind "Password" for querying LDAP servers. The field can be
left blank if the LDAP server allows anonymous binds.
LDAP Number Filter
Configures the filter used for number lookups.
Examples:
(|(telephoneNumber=%)(Mobile=%) ret
urns all records which has the
"telephoneNumber" or "Mobile" field starting with the entered prefix;
(&(telephoneNumber=%) (cn=*)) re
turns all the records with the
"telephoneNumber" field starting with the entered prefix and "cn" field set.
LDAP Name Filter
Configures the filter used for name lookups.
Examples:
(|(cn=%)(sn=%)) returns all records which has the "cn" or "sn" field starting
with the entered prefix;
(!(sn=%)) returns all the records which do not have the "sn" field starting with
the entered prefix;
(&(cn=%) (telephoneNumber=*)) returns all the records with the "cn" field
starting with the entered prefix and "telephoneNumber" field set.
LDAP Version
Selects the protocol version for the phone to send the bind requests. The
default setting is "Version 3".
LDAP Name Attributes
Specify the "name" attributes of each record which are returned in the LDAP
search result. This field allows the users to configure multiple space separated
name attributes.
Example:
gn
cn sn description
LDAP Number Attributes
Specifies the "number" attributes of each record which are returned in the
LDAP search result. This field allows the users to configure multiple space
separated number attributes.
Example:
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 54 of 63
telephoneNumber
telephoneNumber Mobile
LDAP Display Name
Configures the entry information to be shown on phone's LCD. Up to 3 fields
can be displayed.
Example:
%cn %sn %telephoneNumber
Max. Hits
Specifies the maximum number of results to be returned by the LDAP server. If
set to 0, server will return all search results. The default setting is 50.
Search Timeout
Specifies the interval (in seconds) for the server to process the request and
client waits for server to return. The default setting is 30 seconds.
Sort Results
Specifies whether the searching result is sorted or not. The default setting is
"No".
LDAP Lookup
Configures to enable LDAP number searching when dialing and receiving
calls.
Lookup Display Name
Configures the display name when LDAP looks up the name for incoming call
or outgoing call. This field must be a subset of the LDAP Name Attributes.
Example:
gn
cn sn description
User Phonebook Key for
LDAP Search
If set to "Yes", the Phonebook Key will be used to bring up LDAP search. The
default setting is "No".
NAT SETTINGS
If the devices are kept within a private network behind a firewall, we recommend using STUN Server. The
following settings are useful in the STUN Server scenario:
STUN Server
Enter a STUN Server IP (or FQDN) that you may have, or look up a free public STUN Server on the
internet and enter it on this field. If using Public IP, keep this field blank.
Use Random Ports
This setting depends on your network settings. When set to "Yes", it will force random generation of
both the local SIP and RTP ports. This is usually necessary when multiple GXPs are behind the same
NAT. If using a Public IP address, set this parameter to "No".
NAT Traversal
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 55 of 63
Default setting is "No". Enable the device to use NAT traversal when it is behind firewall on a private
network. Select Keep-Alive, Auto, STUN (with STUN server path configured too) or other option
according to the network setting.
WEATHER UPDATE
To customize GXP1160/GXP1165 to display weather information for the preferred city, users could go to
web GUI->Settings->Web Service page and enter the city code in the following options:
Figure 4: Weather Update
By default the City Code is set to "Automatic", which allows the phone to obtain weather information
based on the IP location detected. To use "Self-Defined City Code" option, please follow the steps below
to obtain the correct city code:
In a web browser, go to
www.weather.com;
Enter the city name in the search field. For example, Boston, MA. And click on "SEARCH";
The searching result will show in a new window with URL in the browser's address bar. For example,
http://www.weather.com/weather/right-now/Boston+MA+USMA0046
In the above link, USMA0046 is the city code to be filled in "Self-Defined City Code" option.
Users could then further configure the "Update Interval" and "Degree Unit" for weather information
display.
PUBLIC MODE
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 56 of 63
The GXP1160/GXP1165 supports hot desking using public mode. Under public mode, users could login
the phone with the SIP account User ID and password. Please follow the steps below to configure the
phone for public mode:
Fill up the SIP server address for Account 1 first;
Under Web GUI->Settings->General Settings, set "Public Mode" option to "Yes". Click "Save and
Apply" and reboot the phone;
When the phone boots up, SIP User ID and Password to register to the configured SIP server in
account 1 will be required. Enter the correct account information to log in to the phone. When entering
the account information, press softkey "123"/"abc" to toggle input method;
In login page, pressing CONF button on the phone will show phone's IP address;
After using the phone, go to LCD MENU->LogOut to log off the public mode.
EDITING CONTACTS AND CLICK-TO-DIAL
From GXP1160/GXP1165 Web GUI, users could view contacts, edit contacts, or dial out with Click-to-Dial
feature
on the top of the Web GUI. In the following figure, the Contact page shows all the added
contacts (manually or downloaded via XML phonebook). Here users could add new contact, edit selected
contact, or dial the contact/number.
Before using the Click-To-Dial feature, make sure the option "Click-To-Dial Feature" under web
GUI->Settings->Call Features is turned on. By default it's disabled and the dialing icon in web GUI is in
grey
.
When clicking on the
icon on the top menu of the Web GUI, a new dialing window will show for you
to enter the number. Once Dial is clicked, the phone will go off hook and dial out the number from selected
account.
Additionally, users could directly send the command for the phone to dial out by specifying the following
URL in PC's web browser, or in the field as required in other call modules.
http://ip_address/cgi-bin/api-make_call?phonenumber=1234&account=0&password=admin
In the above link, replace the fields with
ip_address:
Phone's IP Address.
FIRMWARE VERSION 1.0.5.15 GXP1160/GXP1165 USER MANUAL Page 57 of 63
phonenumber=1234:
The number for the phone to dial out
account=0:
The account index for the phone to make call. The index is 0 for account 1, 1 for account 2, 2 for
account 3, and etc.
password=admin:
The admin login password of phone's Web GUI.
Figure 5: Web GUI - Phonebook->Contacts
Figure 6: Click-to-Dial
SAVING THE CONFIGURATION CHANGES
After users makes changes to the configuration, press the "Save" button will save but not apply the
changes until the "Apply" button on the top of web GUI page is clicked. Or, users could directly press
"Save and Apply" button. We recommend rebooting or powering cycle the phone after applying all the
changes.
Add contacts.
Edit contact.
Click to call this contact
from the phone.
Click to dial from
available lines.
57

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Grandstream GXP1165 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Grandstream GXP1165 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,66 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info