482112
36
Verklein
Vergroot
Pagina terug
1/47
Pagina verder
36
GB
Start the refrigerator by plugging it into a
wall socket.
On connection, an alarm is activated to
indicate that the internal cabinet tempera-
ture is too high and that there has been a
power failure. Read “Alarm” to see how the
alarm can be switched off.
Illustration shows the electronic control
panel in the mid-upper part of the cabinet.
The electronically controlled refrigerator is
factory-set to run at an optimum tempera-
ture. The cabinet temperature can be
seen/changed with key °C.
When you press the key and hold it in, the
actual cabinet temperature setting will
appear almost instantaneously. This setting
is displayed for about 3 seconds. Holding
down the key will enable you to change the
temperature setting (see below).
Press °C and hold it in. The actual setting
will be displayed almost instantaneously;
the figures will light up one after the other
on the scale. When the end of the scale is
reached, all figures will go out for a
moment before they start lighting up again.
Release the key when the figure under the
required temperature lights up. The
refrigerator will now run on the new setting.
Press °C as under “Changing the tempera-
ture”, but release the key the moment all
figures go out. This cuts off the refrigerating
function and the cabinet interior can be cle-
aned. It remains possible to read the cabi-
net temperature for about 2 hours, after
5
which this function is automatically swi-
tched off.
After cleaning, start the refrigerator again
by setting a temperature (see “Changing
the temperature”).
The alarm is activated in the event of
power failure, or if the cabinet temperature
remains 6°C higher than the setting for
more than 2 hours. The alarm will continue
even though the temperature returns to
normal, just to make sure you know that
something has been wrong.
Alarm on starting
Your new GRAM model will not have been
started since it was tested in the factory
and therefore when you start it in your
kitchen the electronics “think” that there
has been a power failure. The alarm is
therefore activated.
Alarm deactivation
Press °C and hold it in. The temperature
setting will be displayed almost instantane-
ously. Release the key as soon as the set-
ting appears, to cancel the alarm.
When the figure 9 on the display lights up,
the temperature in the refrigerator is +9°C
or higher than can be shown on the di-
splay.
When the figure 2 flashes - and only this
figure - the temperature in the refrigerator
is lower than can be shown on the display.
When the two outermost figures on each
side of the display flash alternately with the
four middle figures, it means that there is a
defect in the temperature sensor.
Alarm: The figures light up one after
Alarm
Changing the
temperature
Cutting off for
cleaning/defrosting
Electronic control
Signals
Type 76-004-1260 09/09/04 10:48 Side 36
36

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gram KS2400 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gram KS2400 in de taal/talen: Nederlands, Duits, Engels, Frans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 0,84 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info