460598
26
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
26
The temperature in the freezer is closely related to
the setting in the refrigerator in cabinets with only
one compressor.
If quick freezing down is required the cabinet
should be set to run at the lowest temperature, i.e.
„Max”. As this setting affects both the refrigerator
and the freezer, personal experience should be
used to determine how long the quick-freeze (and
thus the low refrigerator temperature) should last.
After freezing down, the normal temperature setting
should again be chosen.
PLEASE NOTE!
Pack your frozen foods in airtight and watertight
material in order to avoid drying out. Portions should
be as flat as possible to allow rapid freezing down.
If during transport the fridge/freezer has been laid
down, or if it has been stored in cold surroundings
(colder than +5°C) it must be allowed to stabilise for
at least two hours before being switched on.
Start the fridge/freezer by plugging into a wall socket.
Important! If the mains lead has been damaged, it
must be replaced with a corresponding type supplied
by Gram A/S or one of Gram’s service centres.
When the appliance is started the thermostat should
be in its middle setting. After an hour or two the
cabinet temperature will have fallen.
If a lower temperature is required, turn the thermostat
knob towards „Max”. If a higher temperature is
required, turn the knob towards „0”. Refrigeration is
switched off when the thermostat knob setting is „0”.
GB
5
Freezing down
Changing the temperature
Starting up
Specifically for Fresh line models 4A
Switch the cabinet off by turning the thermostat
knob to ”0”. Empty the cabinet and begin by
removing the door handles. Tilt the cabinet 40° in
order to gain access to the lowest hinge. Remove
the adjustable feet. Remove the three screws
holding the lowest bracket in place using a Phillips
screwdriver. (1). Remove the refrigerator door and
unscrew the three screws from the bracket on the
base on the cabinet (2).
Before refitting these brackets on the opposite side
of the cabinet, move the threaded pin on the hinge
bracket to the other threaded hole. Remove the two
screws holding the middle hinge using a Phillips
screwdriver (3). Remove the freezer door. Use the
screws from the opposite side to cover the holes.
Remove the threaded pin under the control panel
using a Phillips screwdriver and move it to the
opposite side. (4). Refit the freezer door by pushing
it onto the upper threaded pin. Refit the middle hinge
on the opposite side and screw it into position using
a Phillips screwdriver. Refit the refrigerator door
and screw the lowest hinge into position using a
Phillips screwdriver. Refit the adjustable feet and,
finally, refit the door handles.
Brief temperature variations are normal and occur when:
- the cabinet is filled with fresh items,
- a door is left open for longer periods,
- the refrigerating/freezing element defrosts.
Items of food in the cabinet will not be affected
by these variations and the temperature will quickly
return to normal.
Brief temperature varia-
tion
26

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gram KF 280 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gram KF 280 in de taal/talen: Nederlands, Engels, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 0,69 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info