460592
3
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
FS 230 / FS 290 / FS 320 / FS 232 / FS 292
/ FS 293 / FSD 23 / FSD 29 / FSD 32
M60
GB Instructions for use 2
NL Gebruiksaanwijzing 17
2
GB
Congratulations on your new GRAM
freezer
Congratulations on your new freezer. The freezer was developed taking the
different storage requirements of food items into consideration. The freezer is
equipped with freezing drawers in various sizes giving room to all the little things
as well as a big turkey.
To ensure that you get as much joy out of your freezer as possible, it is important
that you become familiar with the freezer functions and know how to use the
accessories. Please read the instructions for use carefully before setting up and
using your freezer.
As these instructions apply to several freezer models, the equipment may vary
from model to model.
Before using the freezer
On receipt, check to ensure that the freezer has not become damaged in
transport. Transport damage should be reported to the local supplier before the
freezer is put to use.
Before filling the freezer with items of food, the freezer interior should be cleaned
with lukewarm water containing a mild detergent. Use a soft cloth. If the freezer
has been stored in cold surroundings (colder than +5°C), it must be allowed to
stabilise for at least 2 hours before being switched on.
Read more about setting up, building in, and installation on pages 12 and 13.
3
GB
Contents
Important information
Transporting and moving the freezer 5
If the freezer is to remain unused for a time 5
Old refrigerators/freezers 5
Disposal 5
Product description
Using the freezer
Electronic control 23
Switching ON/OFF the freezer 23
Temperature regulation 24
Temperature inside the freezer 24
Freezing down 24
Brief temperature variations 24
Alarm
Alarm codes 9
Interrupting an alarm 9
Using the freezer and accessories
Defrosting and cleaning
Manual defrosting 10
Cleaning 10
4
Setting up and installation
Where to place the freezer 12
Building into a kitchen element 12
Building into a refrigerator element 12
Electrical connection 13
Starting up the freezer 13
You can change the doors from right-hinged to
left-hinged or vice versa yourself 14
GRAM Service
Spare parts 16
GB
5
GB
Important information
The freezer contains the environment-
friendly, non-ozone-depleting
refrigerant R600a. As R600 is a
flammable gas, it is important to avoid
damage to the refrigerating circuit
during transport and installation. If the
refrigeration circuit is damaged, avoid
using naked flame in the vicinity of the
freezer and connecting power to the
cabinet. Also make sure that there is
good ventilation in the room. If you are
in doubt, please contact your supplier.
Transporting and moving
the freezer
The freezer must always be moved in
the vertical position. The freezer must
not be tilted more than approx. 40°. If
the freezer has been tilted more than
40°, the power supply must not be
connected until the appliance has
stood upright for at least two hours.
If the freezer is to remain
unused for a time
If the freezer is to remain unused for a
time, e.g. in a summerhouse, switch it
off by pressing the switch
O (2)
and disconnecting the power supply to
the cabinet and possibly pulling the
plug out of the wall socket.
Empty, defrost and clean the freezer.
Leave the freezer door slightly ajar.
This will prevent bad smells in the
cabinet.
Warning
Old refrigerators and freezers are often
fitted with complicated latches that can
only be opened from the outside. If you
have an old unit like this stored away
somewhere, or if you scrap it,
remember to destroy the latch to
prevent children from being exposed to
danger by getting locked inside the
unit.
Note! Please also observe the
environmental rules on disposal.
Disposal
If a freezer is to be disposed of, this
must be done in an environmentally
correct way, in accordance with current
rules on disposal.
Please observe the environmental
rules on disposal. There might be
special requirements/conditions to be
observed.
Information on disposal can be
obtained from:
- Gram A/S
- Your white-goods supplier
- Authorities (the local council, Ministry
of the Environment, etc.)
6
GB
Product description
The freezer is intended for use in a
normal household. It is designed for
temperature class SN in accordance
with European standard EN 153. This
means that the freezer will run best at
a room temperature of +10°C to
+32°C. The appliance is a four-star
freezer approved for freezing down and
storing frozen items of food.
Control panel
Nameplate
Rubber sealing strip
Condenser
Freezing tray
Freezing drawers
Door handle
Compressor
Compressor compartment
Adjustable feet
7
GB
Using the freezer
Electronic control
The freezer is equipped with electronic
control. The control panel is concealed
behind the freezer door. The freezer
has been factory-set to operate at
optimum temperature, i.e. -18°C. If you
wish to change the preset temperature,
the new setting will be stored in the
electronic control. In case of power
failure, the control will remember the
latest setting when power to the
cabinet is restored.
The electronic control has the following
functions:
- ON/OFF switch function
- Display of the real temperature inside
the freezer’s chamber
- Setting the temperatures in the
freezer’s chamber
- Quick freezing
- Adjustment of the display contrast
- Acoustic and visual signalling of
alarms
- Visual signalling with use of LEDs
of switched on functions
1. Freezer’s ON switching pushbutton
2. Freezer’s OFF switching pushbutton
3. Green light-emitting LED signalling that
the freezer’s chamber has been
switched on
4. “FREEZE” pushbutton
5,6 Display showing the set temperature,
time of quick freezing, and alarm
status codes
7,8 Pushbutton adjust the temperature
inside the freezer’s chamber
9. Function pushbutton for activating
quick freezing and adjusting the
light on the display
10. Blue light-emitting LED signalling that
the quick freezing has been
switched on
8
GB
Switching ON/OFF the freezer
Switching ON the freezer: press and hold
the pushbutton (1). The operation of
switching on the freezer is signalled by
the green light-emitting LED (3), and the
real temperature inside the freezer’s
chamber shall be shown on the display.
Switching OFF the freezer: press and
hold the pushbutton (2).
Temperature inside the freezer
The set and displayed temperatures
are the freezer’s average temperatures.
It should be remembered that the fol-
lowing, among others, impact the tem-
perature of the freezer chamber: the
temperature of the environment, the
level to which the chamber is filled with
food products, frequency of the door
being opened, the level of frost on
cooling elements inside. In an event of
a significant change in any of the
above listed factors, the temperature of
the freezer should be set appropriately,
e.g., if the temperature of the environ-
ment is low, lower the freezer tempera-
Temperature regulation
The temperature in the freezer’s chamber
can be set within the range from -23
o
C
up to -16
o
C. When pressing and holding
the FREEZE pushbutton (4), the set
temperature shall be shown on the
display. When pressing the pushbutton
(7) or pushbutton (8) it is
possible to modify setting of the
temperature inside the freezer.
Every pressing of the pushbutton shall
activate a brief acoustic signal. In case of
the power supply failure or
disconnecting the power supply to the
freezer, the control will keep in the
memory the latest settings after the power
supply has been restored.
ture and wait 24 hours.
Quick freezing
Quick freezing at a low temperature is
important to maintain the quality of the
food products. Quick freezing is activated
by pressing and holding the function
button (9) and pressing the FREEZE
pushbutton (4). The blue light-emitting
LED (10) switches on signalling
activation of the quick freezing function.
You can chose between freezing in 24 or
48 hours:
- by holding the function button (9) and
pressing once the FREEZE
pushbutton (4) you switche on the
24-hours quick freezing function
and “24” is shown on the display,
- by holding the function pushbutton
(9) and pressing twice the FREEZE
pushbutton (4) you switch on the 48-
hours quick freezing function and
“48” is shown on the display,
- the next pressing of the pushbutton
(4) switches off the quick freezing
function and switches off the blue
light-emitting LED.
The quick freeze function will be
automatically disabled after 24 or 48 hours.
After pressing the quick freezing function
pushbutton, the indication “24” or “48” is
displayed for 5 seconds. Afterwards the
real temperature inside the freezer’s
chambers will be shown on the display.
It is recommended to switch on the quick
freezing function (24 or 48 hours) for
approximately 2 hours before loading the
freezer’s chamber with large quantities
of the food products.
Brief temperature variations
Brief temperature variations are normal
and may occur when for example the fresh
food products are stored in the freezer or
when the door is open for a longer time.
ss
ss
s
t t
t t
t
9
GB
These variations will not affect the food
products and the temperature will quickly
return to the set-point level.
When the door of the freezer’s chamber
is open for more than 2 minutes the
display will show E4 alarm and the
acoustic alarm will be activated.
Alarm codes
E2 – temperature sensor fault in the
freezer’s chamber
E4 – door is open
E5 – too high temperature inside the
freezer’s chamber
E6 – too high temperature after the
power failure
E2
The temperature sensors has been
damaged. Call technical service. The
built-in emergency program maintains
the admissible temperature until the fault
will be eliminated by the authorized
technical service.
E4
The door of the freezer’s chamber has
been opened for more than 2 minutes.
The alarm code disappears when the
door is closed.
E5
The temperature inside the freezer’s
chamber has been exceeding the set
temperature for more than 2 hours.
E6
There has been the power supply failure.
The power supply has been
disconnected from the freezer and the
temperature inside the freezer’s
chamber is too high.
Interrupting an alarm
The acoustic alarm can always be
interrupted by opening the door and/or
pressing any push-button.
The alarm code E3 - E6 can be cancelled by
pressing for 7-8 seconds at the same time
the push-buttons (7) and (8).
The exception: in case of the alarm E1 it
is possible to cancel the alarm only after
replacing damaged sensors.
In case the display shows symbols E5 or
E6, it is possible to monitor the maximum
temperature recorded by the control
system by pressing the buttons 9 and/or
10. If the alarm is caused by a more
permanent defect the alarm code will
appear again but without the acoustic alarm.
In such cases please contact Gram Service
Center.
Display brightness adjustment
By pressing and holding the pushbutton
(9) and
- pressing at the same time the
pushbutton (7), the display
brightness increases,
- pressing at the same time the
pushbutton
(8), the display brightness
decreases.
When adjusting the display brightness,
the display shows the following
indications:
1.8 – minimum brightness
2.8 – medium brightness
3.8 – maximum brightness
(manufacturer’s setting).
Alarms
Normal use of the freezer may cause
different situations leading to interruption
of various functions and unstable
operation of the entire equipment as a
consequence. These interruptions are
shown on the display as the alarm code
(an E followed by a number) and
signalled by the acoustic alarm.
In case there will be several faults the
alarm codes shall be displayed in turn.
t t
t t
t
ss
ss
s
ss
ss
s
t t
t t
t
10
Manual defrosting
It is recommended to defrost the
freezer at least once a year.
Stop the compressor by pressing
button
O (2) and disconnecting
the power supply to the freezer.
Remove all items from the freezer. To
keep them as cold as possible during
defrost, they can be placed in the
refrigerator. Place a bowl containing
hot water (not boiling) in the freezer.
Pull out the drain spout (10) and place
a bowl under it to receive defrost water.
When the ice has melted, clean out the
freezer using water and a mild
washing-up liquid. Dry the freezer with
a soft cloth.
GB
10
Using the freezer and accessories
The whole of the freezer can be used
for freezing down and for the long-term
storage of frozen items of food. In
addition, the freezer comes equipped
with a freezing tray for berries, etc.
Defrosting and cleaning
Warning
It is dangerous to use electrical
apparatus, knives or sharp objects to
accelerate defrost.
Cleaning
Stop the compressor by pressing
button
O (2) and disconnecting
the power supply to the freezer.
The freezer is best cleaned using a
weak soap solution and a soft cloth.
Never use cleaning agents that scour.
Clean the sealing strip around the
door regularly to prolong its life. Use
only clean water for cleaning the
sealing strip.
The plastic parts of the cabinet cannot
withstand boiling water (max. 85°C). It
is important to prevent water from
getting into the control panel
Remove dust and threads from the
compressor compartment at the back
of the freezer with a vacuum cleaner.
Connect the current and restart the
freezer by pressing start button
(1).
11
GB
Cleaning of doors in stain-
less steel or aluminium
Stainless steel or aluminium doors on
GRAM products can, with advantage,
be cleaned with a spray and a soft
cloth. There are a number of different
spraying agents for this purpose on
the market. We recommend that you
contact your usual white goods
supplier for advise on the advantages
and disadvantages of the individual
products. However, we would point out
that
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gram FS 292 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gram FS 292 in de taal/talen: Nederlands, Engels als bijlage per email.

De handleiding is 0,5 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info