725284
6
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
Do not install or use
this child restraint until you read
and understand the instructions in
this manual.
FAILURE TO PROPERLY USE THIS
CHILD RESTRAINT INCREASES
THE RISK OF SERIOUS INJURY
OR DEATH IN A SUDDEN STOP OR
CRASH.
TURBOBOOSTER LX
BOOSTER SEAT
www.gracobaby.com
PD349048C 10/19
2
1-A Quick Guide to Your Manual
1-B Welcome to the Graco Family
1-C Before You Begin
Register This Child Restraint
If You Need Help
Certification
Car Seat’s Useful Life
Vehicle Seat Protection
Warm Weather Use
1-D Safety Warnings
1 Important Pages 5-19
2 Features Pages 20-23
2-A Car Seat Features
3
3 Booster Pages 24-32
4-A Securing Child Backed Booster
4-B Securing Child Backless Booster
4 Securing Child Pages 33-42
3-A Booster Use
3-B Install Booster
3-C Install Backless Booster
5 Accessories Page 43
4
6-A How to Remove Lower Anchor Connectors
6-B Choosing Vehicle Seat Location
6-C Unsafe Vehicle Seat Location
6-D Vehicle Seat Belts
7-A Cleaning Seat Pad
7-B Cleaning Lower Anchor Straps
6 Vehicle Information Pages 44-48
7 Care & Cleaning Pages 49-50
5
1-A Quick Guide to Your Manual
Car Seat Assembly (On Select Models)
This car seat is for children:
Booster: 40-100 lb (18.1-45 kg) 43-57 in. (110.1-145 cm)
at least 4 years old
Booster Without Back: 40-100 lb (18.1-45 kg) 43-57 in.
(110.1-145 cm) at least 4 years old
Adult Assembly Required
1. Attach Armrests
To attach armrests to base, press armrests into opening
in base.
CHECK to make sure armrests are securely attached by
pulling up on them.
6
3. Seat Pad
Wrap seat pad around front of base and attach with
elastic straps as shown.
4. Back Support Pad
On certain models, your lower back support
pad may not be attached to the back support.
Place lower back support pad around edges of
support as shown. Then fasten lower elastic
strap to the metal hook on the other side of the
seat pad.
If your lower back support pad is already
attached go to step 5.
5. Back Support
Squeeze adjustment button and slide two
pieces together until they snap into place.
CHECK to make sure two pieces are securely
snapped together by pulling on them.
2. Cupholder
CUPHOLDER MUST BE INSTALLED.
Remove cupholder from compartment in bottom of base.
Align tabs on side and bottom of
cupholder with their slots in base and
press cupholder into place.
DO NOT REMOVE CUPHOLDER ONCE IT IS ATTACHED.
7
4. Back Support Pad
On certain models, your lower back support
pad may not be attached to the back support.
Place lower back support pad around edges of
support as shown. Then fasten lower elastic
strap to the metal hook on the other side of the
seat pad.
If your lower back support pad is already
attached go to step 5.
5. Back Support
Squeeze adjustment button and slide two
pieces together until they snap into place.
CHECK to make sure two pieces are securely
snapped together by pulling on them.
8
6. Elastic Straps
Attach elastic strap to metal hook on other side of seat
pad as shown. If your elastic strap is already attached
you can skip to step 7.
7. Head Support Fabric
Flip seat over and insert the fabric from the head
support underneath the fabric on the lower back support
as shown.
To make insertion of fabric easier, slide the upper and
lower back pieces apart by squeezing the adjustment
button.
9
8. Attach Backrest
Attach backrest to base. “U”-shaped hooks on bottom
of backrest will interlock with bars on base.
Make sure that no part of the seat covering interferes
when attaching backrest to the base.
9. Backrest
Once backrest is securely attached to the base, push
backrest up as shown.
Your Graco booster seat is now ready to use.
10
Get to Know Your Car Seat
What Seating Location Should I Use?
Review section 2-A to see all of the features of this booster seat.
The best seating location for this booster seat is one that:
• Is recommended by your vehicle owner’s manual, and
• Results in a secure installation of this booster seat.
Some vehicles have specific requirements for where the booster seat can be installed,
so be sure to check your vehicle owner’s manual for available seating positions, if any.
For example, sometimes the center rear seat has a lap belt only vehicle seat belt, which
cannot be used with this booster seat.
Review section 6-B, 6-C, 6-D of this manual AND your vehicle owner’s manual.
According to accident statistics, the safest place for
your child in any vehicle is the back seat. The center
of the back seat can be the safest during a possible
side impact.
11
The best seating location for this booster seat is one that:
• Is recommended by your vehicle owner’s manual, and
• Results in a secure installation of this booster seat.
Some vehicles have specific requirements for where the booster seat can be installed,
so be sure to check your vehicle owner’s manual for available seating positions, if any.
For example, sometimes the center rear seat has a lap belt only vehicle seat belt, which
cannot be used with this booster seat.
Review section 6-B, 6-C, 6-D of this manual AND your vehicle owner’s manual.
When Installing As a Booster
Vehicle Seat Belt
There is one type of vehicle seat belt that can be
used: Lap/Shoulder Seat Belt.
Review section 3 of this manual AND your vehicle
owner’s manual.
Lower Anchor System
The lower anchor system consists of lower anchor bars, which
are built-in to your vehicle, and lower anchor connectors that
are built-in your car seat.
Review section 3 of this manual AND your vehicle owner’s
manual.
Using The Car Seat Correctly
To make sure your child is secured properly, review section 3 and 4 to fit your child.
12
Use Lap/Shoulder Belt Only
Review section 3
Position Lap Belt
Lap belt must go in front of armrest
and lie low across your child’s hips and
thighs.
Review section 3
Position Shoulder Belt
Shoulder belt lies across shoulder
between neck and edge of shoulder.
Review section 3
Booster Installation
Highback Backless
13
1-B Welcome to the Graco Family!
Your child’s safety depends on you. No car seat can guarantee protection from injury in
every situation, but proper use helps reduce the risk of serious injury or death.
Even if this car seat seems easy to figure out on your own, you must follow the detailed
instructions in this instruction manual to ensure the steps below are performed correctly.
14
1-C Before You Begin
Please fill out the prepaid registration postcard attached to the seat and mail it in today or
register online at www.gracobaby.com/carseatregistration.
Child restraints could be recalled for safety reasons. You must register this restraint to
be reached in a recall. Send your name, address, and the restraint’s model number and
manufacturing date to:
Graco Children’s Products, Inc.
Attn: Customer Service
P.O. Box 169, Elverson, PA 19520-9901
or register online at www.gracobaby.com/carseatregistration
or call 1-800-345-4109
For recall information, call the U.S. Government’s Vehicle Safety Hotline at
1-888-327-4236
(TTY: 1–800–424–9153), or go to http://www.NHTSA.gov.
Register This Child Restraint
15
Please fill out the prepaid registration postcard attached to the seat and mail it in today or
register online at www.gracobaby.com/carseatregistration.
Child restraints could be recalled for safety reasons. You must register this restraint to
be reached in a recall. Send your name, address, and the restraint’s model number and
manufacturing date to:
Graco Children’s Products, Inc.
Attn: Customer Service
P.O. Box 169, Elverson, PA 19520-9901
or register online at www.gracobaby.com/carseatregistration
or call 1-800-345-4109
For recall information, call the U.S. Government’s Vehicle Safety Hotline at
1-888-327-4236
(TTY: 1–800–424–9153), or go to http://www.NHTSA.gov.
Model Name _________________________
Model Number _______________________
Date of Manufacture __________________
Date of Purchase _____________________
For future reference or if you change addresses, record the model name, model number,
date of manufacture and purchase date of this car seat on the below. You can find this
information either on the registration card if you still have it or on the date label located on
the back of the car seat.
In the U.S.A, please contact our Customer Service Department with any questions you
may have concerning parts, use, or maintenance. When you contact us, please have
your product’s model number and date of manufacture ready so that we may help you
efficiently. These numbers can be found on a sticker on the back side of your car seat.
For additional resources or to get your car seat checked by a child passenger safety
technician, please visit the following web sites:
www.nhtsa.gov • www.seatcheck.org • www.safekids.org
If You Need Help
16
This child restraint meets or exceeds all applicable requirements of Federal motor vehicle
safety standard 213 for use in motor vehicles.
This child restraint is NOT certified for aircraft use because aircrafts do not
have shoulder belts.
STOP using this car seat and throw it away 10 years after the date of manufacture. Look
for date of manufacture label on back of the car seat.
Graco Children’s Products Inc. advises against loaning or passing along a car seat unless
you know the complete history of the product. We also advise against purchasing a car
seat second hand.
Certification
Car Seat’s Useful Life
Protect vehicle seat. Use a car seat mat, towel, or thin blanket under and behind car seat.
Vehicle Seat Protection
Car seat parts can get very hot in the sun or warm weather. To avoid burns, always
check before putting child in car seat.
No car seat can guarantee protection from injury in every
situation, but proper use helps reduce the risk of serious injury
or death. READ THIS MANUAL CAREFULLY.
17
Car seat parts can get very hot in the sun or warm weather. To avoid burns, always
check before putting child in car seat.
Warm Weather Use
Failure to follow these instructions and child restraint’s labels can
result in child striking the vehicle’s interior during a sudden stop or
crash.
1-D Safety Warnings
No car seat can guarantee protection from injury in every
situation, but proper use helps reduce the risk of serious injury
or death. READ THIS MANUAL CAREFULLY.
18
! When forward-facing, children should use the built-in harness system for
as long as possible until they reach the maximum forward-facing weight or
height for their car seat. At that point, children should ride in a belt-
positioning booster seat. A booster is no longer needed once the vehicle
seat belt fits properly, typically when they reach 4 feet 9 inches (145 cm)
tall and are between ages 8-12. Be sure to check your local and state
laws, as well as AAP and NHTSA recommendations, for car seat usage.*
! Review your vehicle owner’s manual for more information about air bags
and car seat use.
! If your vehicle does not have a back seat, review your vehicle owner’s
manual.
! Select a suitable location for the car seat in your vehicle.
! DO NOT use car seat if it is damaged or missing parts.
*Graco Supports the American Academy of Pediatrics and National Highway Traffic Safety Adminis-
tration‘s Car Seat Guidelines. Visit www.gracobaby.com/en-US/safety-information for information on
car seat usage recommendations.
19
! Always secure car seat with the lower anchor hooks or a vehicle seat
belt, when unoccupied. In a crash, an unsecured car seat can injure
passengers.
! If car seat is in a crash, it must be replaced. DO NOT use it again! A
crash can cause unseen damage and using it again could result in
serious injury or death.
! DO NOT use accessories or parts other than those provided by Graco.
Their use could alter the performance of the car seat.
! Never leave child unattended, even when sleeping. Child may become
tangled in vehicle belt straps and suffocate or strangle.
! Never attach two lower anchor connectors to
one vehicle lower anchor bar unless specifically
allowed by the vehicle manufacturer.
2 Features
20
2-A Car Seat Features
D
A
B
F
C
E
2 Features
21
A Head Support
B Shoulder Belt Guide
C Cup Holder
D Lower Anchor Adjuster Button
E Lower Anchor Adjustment Straps
F Storage Compartment
2 Features
22
A
B
C
B
2 Features
23
A Head Support Adjustment Lever
B Lower Anchor Connectors
C Belt Positioning Clip (Inset)
3 Booster
24
3-A Booster Use
Booster Use With Back:
40-100 lb (18.1-45 kg) 43-57 in.
(110.1-145 cm) at least 4 years old
Booster Use Without Back: 40-100 lb (18.1-45
kg) 43-57 in. (110.1-145 cm) at least 4 years old
Place car seat forward-facing in the vehicle back seat.
Make sure vehicle seat’s lap belt is adjusted snugly and
lays low on the child’s hip and is routed in front of the
armrest in the booster’s belt path.
Vehicle belts MUST lie flat against child and MUST NOT
be twisted.
Vehicle seat’s shoulder belt is adjusted snugly and should
lie between child’s neck and edge of shoulder.
DO NOT position vehicle shoulder belt under the child’s
arm or back.
Vehicle Lap/Shoulder
Belt
Vehicle Lap/Shoulder
Belt
Never use a vehicle lap-only belt across front of child.
DO NOT allow child to slouch or slide down in the booster
seat.
DO NOT position vehicle belt over top of armrests.
Vehicle’s seat headrest SHOULD NOT create a gap
between vehicle seat and booster seat.
The front of booster seat MUST NOT hang over front of
vehicle seat.
If child will not keep vehicle belt properly positioned, DO
NOT use this booster seat. Use a different car seat.
When forward-facing, children should use the built-in
harness system for as long as possible until they reach
the maximum forward-facing weight or height for their car
seat. At that point, children should ride in a belt-positioning
booster seat. A booster is no longer needed once the vehicle
seat belt fits properly, typically when they reach 4 feet 9
inches (145 cm) tall and are between ages 8-12. Be sure to
check your local and state laws, as well as AAP and NHTSA
recommendations, for car seat usage.
3 Booster
25
Never use a vehicle lap-only belt across front of child.
DO NOT allow child to slouch or slide down in the booster
seat.
DO NOT position vehicle belt over top of armrests.
Vehicle’s seat headrest SHOULD NOT create a gap
between vehicle seat and booster seat.
The front of booster seat MUST NOT hang over front of
vehicle seat.
If child will not keep vehicle belt properly positioned, DO
NOT use this booster seat. Use a different car seat.
When forward-facing, children should use the built-in
harness system for as long as possible until they reach
the maximum forward-facing weight or height for their car
seat. At that point, children should ride in a belt-positioning
booster seat. A booster is no longer needed once the vehicle
seat belt fits properly, typically when they reach 4 feet 9
inches (145 cm) tall and are between ages 8-12. Be sure to
check your local and state laws, as well as AAP and NHTSA
recommendations, for car seat usage.
Never Use a Vehicle
Lap-Only Belt Across
Front of Child
3 Booster
26
Graco allows the securing of the car seat with the lower
anchor attachment in the booster mode. The child still MUST
BE SECURED with the vehicle lap/shoulder seat belt. The
lower anchor attachment can be used in the booster mode
regardless of the weight of the child up to 100 lb (45 kg).
Verify the following before using the lower anchor
attachment in the booster mode:
The lower anchor attachment DOES NOT interfere with
any vehicle seat belts or buckles.
If the lower anchor attachment interferes with the vehicle seat belts or if the chosen seating
position does not have lower anchors, you MUST store the lower anchor connector. Always
secure car seat with the lower anchor connector or a vehicle seat belt, even when unoccupied.
In a crash, an unsecured car seat can injure passengers.
3-B Install Booster
1. Place Car Seat Forward-Facing in Back Seat of
the Vehicle
Place forward-facing in vehicle seat. The bottom of the
seat should sit as flat as possible on the vehicle seat.
2. Extend the Lower Anchor Straps.
For easier installation, extend the lower anchor
straps to their maximum
length by pressing the
button on the front of the
base and pulling out on
the straps.
3 Booster
27
1. Place Car Seat Forward-Facing in Back Seat of
the Vehicle
Place forward-facing in vehicle seat. The bottom of the
seat should sit as flat as possible on the vehicle seat.
Skip to Step 5 if Not Using the Lower Anchor Attachment
2. Extend the Lower Anchor Straps.
For easier installation, extend the lower anchor
straps to their maximum
length by pressing the
button on the front of the
base and pulling out on
the straps.
3 Booster
28
3. Attach Lower Anchor Connectors to Vehicle’s
Lower Anchors.
Lower Anchor straps should not be twisted.
5. Thread the Vehicle Seat Shoulder Belt Through
Seat Belt Guide on the Headrest
See section 4-A to secure your child.
4. Tighten the Lower Anchor Straps
Remove all the slack from the lower anchor straps by
pushing on the booster and pulling straps on front of the
booster.
Depending on your vehicle, you may need to align the
lower anchors with the slots in the base to get a good
install.
The bottom of the seat should sit as flat as possible on
the vehicle seat.
3 Booster
29
3. Attach Lower Anchor Connectors to Vehicle’s
Lower Anchors.
Lower Anchor straps should not be twisted.
5. Thread the Vehicle Seat Shoulder Belt Through
Seat Belt Guide on the Headrest
See section 4-A to secure your child.
3 Booster
30
1. Remove the Back Support (On Select Models)
Recline seat back then remove from base.
2. Place the Booster Seat Forward-Facing in the
Back Seat of Vehicle
Place forward-facing on a vehicle seat that has a lap/
shoulder seat belt. The base should sit as flat as possible
on the vehicle seat.
See section 4 to secure your child.
3-C Install Backless Booster
5. Attach Lower Anchor Connectors to Vehicle’s
Lower Anchor Bars.
Lower Anchor straps
should not be twisted.
3 Booster
31
4. Extend the Lower Anchor Straps.
For easier installation, extend the lower anchor straps to
their maximum length by pressing the button on the front
of the base and pulling out on the straps.
If Using the Lower Anchors
5. Attach Lower Anchor Connectors to Vehicle’s
Lower Anchor Bars.
Lower Anchor straps
should not be twisted.
3 Booster
32
6. Tighten the Lower Anchor Straps
Remove all the slack from the lower anchor straps by
pushing on the booster and pulling straps on front of the
booster.
Depending on your vehicle, you may need to align the
lower connectors with the slots in the base to get a good
install.
The bottom of the seat should sit as flat as possible on
the vehicle seat.
33
4 Securing
Child
1. Place Child In Seat
Have your child sit in the booster seat, with his/her
back flat against the back of the booster seat.
2. Thread Vehicle’s Shoulder Belt Into Seat Belt
Guide in the Headrest
4-A Securing Child Backed Booster
Use only the vehicle lap and shoulder belt system
when restraining the child in the booster seat.
34
4 Securing
Child
3. To Raise or Lower Headrest Support
Squeeze adjustment lever and lift or lower headrest for the
proper shoulder belt height.
Forward-Facing
35
4 Securing
Child
4. Buckle the Vehicle Lap/Shoulder Seat Belt
Be sure the lap portion of the vehicle seat belt goes in
front of both armrests and the shoulder belt goes under
the armrest on the buckle side.
Be sure the lap portion of the vehicle seat belt lies low
across your child’s hips.
Be sure the shoulder belt lies across your child’s
shoulders, between the neck and edge of shoulder by
raising or lowering the head support. The belt guides
should be even with or just above the shoulders.
36
4 Securing
Child
Is Everything Correct?
Never Use Lap Belt Only
Lap Belt in Front of Armrest and Lies Low Across
Hips and Thighs
Shoulder Belt Lies On the Shoulder, Between the
Neck and Edge of Shoulders
37
4 Securing
Child
1. Place Child In Seat
Have your child sit in the booster seat, with his/her back
flat against the back of the vehicle seat.
2. Ears Must Be Below the Top of the Vehicle
Seat Back or Headrest.
4-B Securing Child Backless Booster
Use only the vehicle lap and shoulder belt system
when restraining the child in the booster seat.
38
4 Securing
Child
3. Buckle the Vehicle Lap/Shoulder Seat Belt
Be sure the lap portion of the vehicle seat belt goes in
front of both armrests and the shoulder belt goes under
the armrest on the buckle side.
Be sure the lap portion of the vehicle seat belt lies low
across your child’s hips.
Be sure the shoulder belt lies across your child’s
shoulders, between the neck and edge of shoulder.
You may need to use the belt positioning clip to help get
a good fit. See “Using Belt Positioning Clip”
39
4 Securing
Child
Is Everything Correct?
Never Use Lap Belt Only
Lap Belt in Front of Armrest and Lies Low Across
Hips and Thighs
Shoulder Belt Lies On the Shoulder, Between the
Neck and Edge of Shoulders
40
4 Securing
Child
Using Belt Positioning Clip
1. Make Sure Vehicle’s Seat Shoulder Belt Lays in
the Red Zone As Shown
If the vehicle’s seat shoulder belt lays outside this zone,
you MUST use the belt positioning clip. DO NOT use the
belt positioning clip if the shoulder belt is in the red zone.
2. Attach Belt Positioning Clip
The shoulder belt positioning clip MUST be attached to
the slot on the bottom of the base. Insert the loop end
of strap through the slot on
bottom of seat exactly where
shown.
3. Push Clip and Strap Through Loop
Pass the clip and the strap through the loop end as shown
and pull strap up.
41
4 Securing
Child
4. Free End of Strap Should Face Front of Seat
5. Place Child in Seat, Buckle
Child In Seat and Attach Belt
Positioning Clip
With child’s back flat against the back
of the vehicle seat, buckle child in.
Then slide the clip onto the vehicle’s
seat shoulder belt as shown.
Rear View
42
4 Securing
Child
6. Adjust the Belt Positioning Clip to Fit Your Child
Lengthen or shorten the belt length as shown.
Clip should fit right at the top of shoulder as shown.
Be sure the lap portion of the vehicle seat belt lies low
across your child’s hips.
Shorten
Lengthen
43
5
Accessories
5 Accessories (on select models)
Cup Holder
Storage Compartment
6 Vehicle
Information
44
Lower Anchor Connector
Push release button up on front of booster and pull
slightly away from seat.
Press in on the hook’s spring. Push hook in, lift hook up,
twist and pull out away from anchor point.
6-A How to Remove Lower Anchor Connectors
The best seating location for this car seat is one that:
• Is recommended by your vehicle owner’s manual, and
• Results in a secure installation of this car seat
In the event there is no available back seat and / or you have no other option, the National
Highway Traffic Safety Administration (NHTSA) recommends that you take the following
steps:
• Ensure the child is properly restrained according to their age and size
• Move the seat as far back as possible
• Make sure the child is not leaning out of position, such as leaning forward into the
deployment path of the air bag
• Set the air bag ON-OFF switch, if available, to the OFF position
6 Vehicle
Information
45
Lower Anchor Connector
Push release button up on front of booster and pull
slightly away from seat.
Press in on the hook’s spring. Push hook in, lift hook up,
twist and pull out away from anchor point.
Review your vehicle’s owner manual for Seating Locations
6-B Choosing Vehicle Seat Location
The best seating location for this car seat is one that:
• Is recommended by your vehicle owner’s manual, and
• Results in a secure installation of this car seat
In the event there is no available back seat and / or you have no other option, the National
Highway Traffic Safety Administration (NHTSA) recommends that you take the following
steps:
• Ensure the child is properly restrained according to their age and size
• Move the seat as far back as possible
• Make sure the child is not leaning out of position, such as leaning forward into the
deployment path of the air bag
• Set the air bag ON-OFF switch, if available, to the OFF position
6 Vehicle
Information
46
6-C Unsafe Vehicle Seat Location
Never install this car seat in any of the following vehicle seating locations:
rear-facing or side-facing
vehicle seats
booster mode with vehicle
lap belt only seat belt
6 Vehicle
Information
47
6-C Unsafe Vehicle Seat Location
Review your vehicle’s owner manual for vehicle seat belt use
Vehicle Seat Belt Terms
6-D Vehicle Seat Belts
Retractor
A device that winds up the unused vehicle seat belt. It is often
hidden inside the panels on the walls of the vehicle or in the
vehicle seatback.
Latch Plate
The male end of the seat belt with
the silver tongue.
Seat Bight
The crease where the vehicle seat back and seat bottom meet.
6 Vehicle
Information
48
There is one type of vehicle seat belt that
can be used with this car seat:
Lap Belt Only 2
connection points.
The following types of vehicle seat belts
CANNOT be used safely with this car seat:
Lap Belt with Motorized
Shoulder Belt
Lap Belt or Shoulder
Belt Mounted on Door
Belts Forward of the Seat
Bight:
Some vehicles you may not
get a secure fit. Read both
your vehicle and car seat
manuals.
Lap/Shoulder Belt
3 connections points.
Can be used in all car seats modes of use.
Identify Your Seat Belt Type
Refer to seat pad care tag for washing instructions.
Seat Cover
Remove elastic loops and hooks from
seat as shown.
Clean with a damp sponge using mild
soap and cool water. If needed, seat
cover may be removed for cleaning.
Machine wash cover in cold water on
delicate cycle and drip-dry. DO NOT
USE BLEACH.
To put the seat cover back on, re-
attach pad, loops and hooks.
49
7 Care &
Cleaning
The following types of vehicle seat belts
CANNOT be used safely with this car seat:
Refer to seat pad care tag for washing instructions.
Seat Cover
Remove elastic loops and hooks from
seat as shown.
Clean with a damp sponge using mild
soap and cool water. If needed, seat
cover may be removed for cleaning.
Machine wash cover in cold water on
delicate cycle and drip-dry. DO NOT
USE BLEACH.
To put the seat cover back on, re-
attach pad, loops and hooks.
7-A Cleaning Seat Pad
50
7 Care &
Cleaning
Surface wash only with mild soap and damp cloth. DO NOT IMMERSE THE LOWER
ANCHOR STRAPS IN WATER Doing so may weaken the straps.
If lower anchor straps are frayed or heavily soiled, contact Customer Service at
www.gracobaby.com or 1-800-345-4109.
7-B Cleaning Lower Anchor Straps
51
Notes
Store instruction manual in
the slot with the instruction
book icon as shown.
To purchase parts or accessories in the United States,
please contact us at the following:
www.gracobaby.com
or
1-800-345-4109
Replacement Parts
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Graco TurboBooster LX bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Graco TurboBooster LX in de taal/talen: Engels als bijlage per email.

De handleiding is 6,05 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info