703122
19
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
19 EN
Use
PLEASE NOTE!
The device should only be used if it has been completely and correctly assembled!
Make sure that the mincing attachment is engaged correctly and all accessories are
inserted correctly.
Never move the I / 0 / R button to the R (Reverse) position while the device is opera-
ting. Always move the button to the 0 (Off) position rst and wait until the motor has
come to a complete standstill before the button is moved to the R (Reverse) position.
Do not attempt to force food down the feed chute; this may damage the device!
Pull the mains plug from the plug socket before swapping inserts to prevent the de-
vice from being switched on accidentally!
The device is not suitable for constant operation. Operate it for no more than 10
minutes without a pause and then let it cool down for a few minutes.
Do not operate the device for a lengthy period without food.
The device is equipped with overload protection; the device switches off if it is over-
loaded. In this case, pull the mains plug out of the plug socket and allow the device
to cool down for approx. 10 minutes. It is then ready to be used again.
For the best results, we recommend that before processing food you cut it
up roughly and remove bones and tendons from meat.
If food is blocking the device, move the I / 0 / R button to the R (Reverse)
position for a few seconds so that the food causing the blockage can be
dislodged. Then switch off the device and pull the mains plug from the plug
socket before any food residues which are stuck are removed.
Use for Chopping Up Meat and Fish
1. Place the motor unit (6) on an even, stable surface.
2. Insert the mincing attachment (8) into the mount of the
motor unit:
press the release button (5),
place the mincing attachment on the motor unit so that
the feed chute tilts to the right (i.e. towards the I / 0 / R
button (7)),
let go of the release button again and
twist the mincing attachment to the left until it is vertical
and engages.
3. Insert the screw conveyor into the mincing attachment
and the motor unit.
4. Place the cutter head (10) onto the screw conveyor (9).
Make sure that the edges of the cutter head point out-
wards, towards you.
19

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gourmetmaxx AMG31B-100 - 08612 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gourmetmaxx AMG31B-100 - 08612 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 2,28 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info