590771
21
Verklein
Vergroot
Pagina terug
1/160
Pagina verder
GMC-I Messtechnik GmbH 21
Initial Start-Up – Setup
Standby Mode
The system should be switched to the standby mode during
breaks in order to
deactivate the energy intensive background illumination and ex-
tend the service life of the rechargeable batteries.
Ð Press the Standby key.
The test system is switched to the standby mode.
The test system is shut down completely after two hours in the
standby mode.
The test system is reactivated by pressing the ONSTART key, or
by tapping the touch screen.
Switching the System Off
The test system is shut down, and the database is reorganized and
backed up to the CF card / USB stick, if the auto-backup function
is activated.
If the auto-backup function is deactivated, a message appears
when the test system is shut down.
If the test system cannot be switched off with the ESC+HELP key
combination, it can be shut down in an emergency test system by
pressing and holding the Start key for roughly 5 seconds.
Attention!
!
The database may be destroyed in this case!
If the test system is not switched off normally, but rather by means
of a reset, by pressing and holding the Start key, due to power fail-
ure etc., extensive database checking is executed the next time
the instrument is switched on.
4.6 Loading Test Sequences and Test Step Specifications
As of software version 1.9.3, fixed sequences and test step
specifications are no longer stored to the test system, and are
instead included on a CF card as XML files. The inspector is thus
able to load only those sequences to the test system which he ac-
tually needs.
The test sequences can also be write protected, so that they’re
not deleted if the option delete all test sequences” is selected in
SETUP ñ DB Statistics.
Attention!
!
If DB-Init is executed in the SETUP menu, write protection is
not functional!
Loading a test sequence:
Ð Open the Administration menu.
Ð Select the Im-/Export index card.
Ð Touch the Import icon.
Ð Select Files in XML Format on CF Card.
Ð Selected the appropriate XML file.
The XML file is loaded and the corresponding test sequences are
immediately available in the test system.
See also section 7.7.7 to this end.
If you attempt to import a sequence whose name has already
been used in the test system, testing is executed in order to
determine whether or not the sequences have the same content.
If so, the deadlines and the tests are imported without any further
security prompts. if the test sequences are not identical, the user
is asked whether or not the sequence (including tests and dead-
lines) in the database at the test system should be overwritten.
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gossen Metrawatt SECUSTAR FM bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gossen Metrawatt SECUSTAR FM in de taal/talen: Engels als bijlage per email.

De handleiding is 1,75 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info