590774
58
Verklein
Vergroot
Pagina terug
1/72
Pagina verder
58 GMC-I Messtechnik GmbH
16 Storing in (P)SI Module (Accessory) and Database Operations
(Feature KB01)
16.1 Storing Measurement Data in the (P)SI Module
Upon completion of a measurement – message „Test passed/failed“ is
displayed – you can file the measurement data in the memory of the (P)SI
module.
õ Press the STORE key at the (P)SI module.
A text entry field is displayed.
õ You may now enter your comments on the measurement
and/or an ident. no.
õ Press the STORE key once more in order to save the measurement data
and your comments.
The message: „Data are being stored“ is shown on the display.
A detailed description is included in the operating instructions for your
(P)SI module in the chapter „Display, print and store protocol“.
16.2 Database Operations
16.2.1 Storing Test Results to the Test Instrument
If no (P)SI module has been connected, up to 125 reports can be stored
to the test instrument (without function test values and without comments
on DUT). The reports can be viewed as required at the instrument and can
be printed out, for example with the help of a terminal program, see chap-
ter 18.
The reports are sorted by time and date and are displayed with the ID
number. If no ID number was assigned, date and time are automatically
saved instead.
As an alternative, consecutive numbering can be selected.
16.2.2 Uploading Report Templates into Test Instrument, Reading Out From the
Test Instrument, Editing at the PC and Re-Saving to the Test Instrument
The „Test result“ menu allows for storage of up to 4 report templates in the
test instrument. Report templates are uploaded from a file at a PC to the
test instrument (“Load file”). Templates can also be uploaded from the test
instrument to a PC (“Templates from Secutest”), and then edited and re-
saved.
After completion of a test (“Passed” or “Failed” appears at the instru-
ment’s LCD), the test results are read out to one of these report templates
in the form of report data (depending upon the selector switch position or
test regulation) via the RS 232 interface. The report menu in the test in-
strument is activated with the and keys to this end. In order to read
out the report data at a PC, it is necessary to connect the SECUSTORE stor-
age adapter with the RS232 interface. The report can, for example, be
displayed with the PC analysis program WinProfi (as from version 3.06) or
ETC (as from version 1.22).
16.2.3Reading Out and Saving Test Results / Test Data from the (P)SI Module
Test results saved to the test instrument can be displayed, edited, printed
(only PSI module) or saved after reading them into a PC using the desired
report template.
Data can be processed immediately after completion of the test, or from
the database (Feature KB01). Data can be saved with or without a report
template (e.g. for further processing with PS3).
Test results saved to the (P)SI module can also be read out, printed (only
PSI module), saved or processed by means of a report template.
Easy method of printing out reports:
Activate the „test result“ menu in the update and options installation pro-
gram. When the test result is displayed in the test instrument select the
print function (press key „Cursor up“, then set the cursor on „print“ and
press ENTER).
17 Recognition of Probe to Protective Conductor
(Feature KD01)
The protective conductor measurement is expanded to include the
function: “automatic recognition of measuring point change”.
During protective conductor measurement, the instrument recognizes
whether or not the probe is in contact with the protective conductor, and
indicates these two possible conditions by means of acoustic signals.
This function is helpful if several protective conductor connections need to
be tested. The function can be activated in the “test sequence setup”
menu with “auto measuring point” (see “changes to the switch position
menu” above).
58

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gossen Metrawatt SECULIFE ST bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gossen Metrawatt SECULIFE ST in de taal/talen: Engels als bijlage per email.

De handleiding is 0,91 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info