590654
10
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
10 GMC-I Messtechnik GmbH
7 Maintenance
Attention!
!
Before replacing batteries completely disconnect the device from
all external power circuits.
For purposes of transport and maintenance we recommend that
the range selector switch be set to the OFF/V position, in order to
prevent unintentional activation of the tester.
7.1 Batteries
The condition of the batteries should be checked from time to time. Dis-
charged or corroded batteries must be removed from the battery com-
partment. If leakage occurs at the batteries, battery electrolyte must be
completed removed and the batteries replaced. The batteries must be
replaced when:
the needle gauge no longer climbs into the scale which contains the
battery symbol when the range selector switch is set to the battery
test position.
the indicator LED for the selected test voltage does not light up green.
Batteries are to be replaced as described in Chapter 3.1, page 5. Always
replace batteries as a complete set!
Note
Prior to lengthy periods of rest (e. g. holiday), we recommend
removing the (rechargeable) batteries. This helps to prevent
excessive depletion or leakage of batteries, which, under unfa-
vourable circumstances, may cause damage to the instrument.
7.2 Housing
No special maintenance is required for the housing. Keep outer surfaces
clean and dry. Use a slightly dampened cloth for cleaning. Avoid the use
of cleansers, abrasives or solvents.
Device Return and Environmentally Compatible Disposal
The instrument is a category 9 product (monitoring and control instrument)
in accordance with ElektroG (German Electrical and Electronic Device
Law). This device is subject to the RoHS directive. Furthermore, we make
reference to the fact that the current status in this regard can be accessed
on the Internet at www.gossenmetrawatt.com by entering the search term
WEEE.
We identify our electrical and electronic devices in accordance
with WEEE 2012/19/EU and ElektroG with the symbol shown to
the right per DIN EN 50419.
These devices may not be disposed of with the trash. Please contact our
service department regarding the return of old devices.
If you use batteries or rechargeable batteries in your instrument or accesso-
ries which no longer function properly, they must be duly disposed of in
compliance with the applicable national regulations.
Batteries or rechargeable batteries may contain harmful substances or
heavy metal such as lead (PB), cadmium (CD) or mercury (Hg).
They symbol shown to the right indicates that batteries or
rechargeable batteries may not be disposed of with the trash, but
must be delivered to collection points specially provided for this
purpose.
7.3 Measurement Cables
Damaged or buckled measurement cables may not be used under any
circumstances, because this may cause a reduction in insulation perfor-
mance. The permanently connected test cables are double insulated.
Inspect the measurement cables on a regular basis. We recommend that
a thorough inspection be carried out every 6 to 12 months.
Attention!
!
Even if only very slight damage is apparent at the measuring ca-
bles, we recommend that you send the tester, together with the
cables, to the GMC-I Messtechnik GmbH Repair and Replace-
ment Parts Service Department.
Pb Cd Hg
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gossen Metrawatt METRISO PRIME bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gossen Metrawatt METRISO PRIME in de taal/talen: Engels als bijlage per email.

De handleiding is 0,31 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Gossen Metrawatt METRISO PRIME

Gossen Metrawatt METRISO PRIME Gebruiksaanwijzing - Deutsch - 14 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info