590625
8
Verklein
Vergroot
Pagina terug
1/74
Pagina verder
8 GMC-I Messtechnik GmbH
Safety Precautions
1 Safety Features and Precautions
You have selected an instrument which provides you with high
levels of safety.
This instrument fulfills all requirements of applicable European and
national EC directives. We confirm this with the CE mark. The rel-
evant declaration of conformity can be obtained from GMC-I
Messtechnik GmbH.
The TRMS digital multimeter has been manufactured and tested
in accordance with the following safety regulations:
IEC 61010–1:2010/DIN EN 61010–1:2010/VDE 0411–1:2011.
When used for its intended purpose (see page 10), safety of the
operator, as well as that of the instrument, is assured. Their safety
is however not guaranteed, if the instrument is used improperly or
handled carelessly.
In order to maintain flawless technical safety conditions, and to assure
safe use, it is imperative that you read the operating instructions thor-
oughly and carefully before placing your instrument into service, and that
you follow all instructions contained therein.
The multimeter is equipped with an automatic socket blocking
mechanism for your safety, and in order to safeguard your instru-
ment. This mechanism is linked to the rotary switch and only al-
lows access to those jacks which are actually required for the se-
lected function. It also prevents the user from turning the rotary
switch to impermissible functions after the measurement cables
have already been plugged in.
If dangerous voltages are applied in the high-impedance voltage
measuring functions (switch position V), switching to low-imped-
ance measuring functions (switch position Ω, continuity, tempera-
ture or capacitance) causes “HiVoLt” to appear at the display and
the respective measurement is disabled.
Hazardous touch voltages are not detected when the ohm or
capacitance measurement is selected.
If the instrument switches itself off in the event that hazardous
touch voltage is applied (only possible during memory mode
operation), the high-voltage warning symbol remains visible at the
display.
Measuring Categories and their Significance per IEC 61010-1
The measuring category and the maximum rated voltage which
are printed on the device apply to your measuring instrument, for
example 600 V CAT III.
Refer to section 10 regarding use of the measurement cables.
Observe the following safety precautions:
The multimeter may not be used in potentially explosive atmo-
spheres or in the vicinity of unprotected detonators or other ex-
plosive material.
•The Bluetooth function may not be activated on board of air-
crafts according to the FCC or FAA guidelines as critical aircraft
instruments might be disturbed.
CAT Definition
I
Measurements in electrical circuits which are not directly connected to the mains:
e.g. electrical systems in motor vehicles and aircraft, batteries etc.
II
Measurements in electrical circuits which are electrically connected to the low-
voltage mains:
via plug, e.g. in household, office and laboratory applications
III
Measurements in building installations:
Stationary consumers, distributor terminals, devices connected permanently to the
distributor
IV
Measurements at power sources for low-voltage installations:
meters, mains terminals, primary overvoltage protection devices
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gossen Metrawatt METRAHIT ULTRA BT bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gossen Metrawatt METRAHIT ULTRA BT in de taal/talen: Engels als bijlage per email.

De handleiding is 0,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info