361180
6
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
GB
Instructions for use
Refrigerator-freezer
260437
This appliance is manufactured in compliance with relevant
safety standards. However, it is still advisable it is not used
without due supervision by persons with diminished physical,
motoric, or mental capabilities or persons with inadequate
experience or knowledge. The same recommendation applies
to minors using the appliance.
Before connecting the appliance, carefully read the
instructions for use which describe the appliance and its
correct and safe use. The instructions apply to several types
/ models; therefore, they may include descriptions of settings
and equipment that may not be available in your refrigerator.
The instructions also apply to the NO FROST version of the
freezer, featuring a built-in fan and automatic defrosting.
Remove the packaging that is intended for protecting the
appliance or its respective parts during transport.
• Spacers are tted in the corners of the doors; these should
be removed and the plugs attached (only with some models)
should be inserted into the openings.
Before connecting to the power mains, the appliance should
be left to stand still in upright position for at least 2 hours.
Thus, operation errors due to the effect of transport on the
cooling system will be much less likely to occur.
The appliance must be connected to the power mains and
grounded in compliance with the effective standards and
regulations.
The appliance may not be used outdoors and should not be
exposed to rain.
The appliance must be disconnected from the power mains
(unplug the power cord from the wall outlet) before cleaning or
before replacing the bulb.
If the power cord is damaged, it should be replaced by a
service technician or other authorized person.
If the appliance is not used for a longer period of time, switch
it off with the relevant button and disconnect it from the power
mains. Empty the appliance, defrost it, clean it, and leave the
door ajar.
To protect the environment, dispose of the appliance after its
useful life by taking it to an authorized waste collection center.
The packaging is made of environment-friendly materials that
can be recycled, disposed of, or destroyed without hazard to
the environment.
Children should not play with the appliance.
The label with basic information on the appliance is attached in
the appliance interior. If the label is not in your local language,
replace it with the one supplied with the appliance.
3
Important warnings
260437
Warning! Ventilation slots on the appliance or a built-in element must always be clean and
unobstructed.
Warning! Do not use mechanical devices or tools to defrost the refrigerator, nor any other
methods except for those recommended by the manufacturer.
Warning! When installing, cleaning, or removing the appliance, make sure the insulation on the
refrigeration system parts is not damaged. Thus you will also prevent damage to the environment.
Warning! Do not use electric appliances in the refrigerator or freezer interior, except for those
expressly allowed by the refrigerator-freezer manufacturer.
The symbol on the product or on its packaging indicates that this product may not be
treated as household waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic equipment. By ensuring
this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be caused by
inappropriate waste handling of thisproduct. For more detailed information about recycling
of this product, please contact your local city of ce, your household waste disposal service
or the shop where you purchased the product.
Observe the installation instructions.
Do not open the appliance door more frequently than necessary.
Occasionally check whether air can circulate freely behind the appliance.
Condenser unit mounted on the appliance back wall must be kept clean at all times (see section
“Cleaning the appliance”).
If the seal is damaged or loose, replace it as soon as possible.
Store your food in closed containers or other appropriate packaging.
Before placing the food in the refrigerator, let it cool down to room temperature.
Defrost your frozen food in the refrigerator compartment.
Remove the freezer drawers and door as described in the instructions, in order to make use of
the entire capacity.
Defrost your conventional freezer when a frost layer approximately 3-5 millimetres thick has
accumulated on the surfaces in the freezer compartment.
Make sure the shelves are evenly distributed and that the food is arranged in a way that
allows free circulation of air (heed the recommended food arrangement as described in the
instructions).
• In appliances tted with a fan, do not block the fan slots.
4
A few tips on how to save power with your
refrigerator-freezer combo
260437
Appliance interior equipment may change subject to appliance model.
The drawers are protected against pulling out. If you wish to remove a drawer, pull it out as far as
it will go, then lift its front part and pull it out completely.
* Only with some models.
A Refrigerator compartment
1 Control unit
2 Interior illumination lamp
3 Shelf (height adjustable)
4 Fruit and vegetables
bin / drawer
5 Refrigerator door rack (deep
and shallow version)
6 Bottle rack
B Standard freezer
(standard appliances)
7 Freezing drawer
8 Storage drawer
9 Storage drawer
10 Freezer door rack*
11 Water discharge groove*
12 Foot*
13 Wheel*
B NO FROST freezer
7 Storage drawer
8 Freezing drawer
9 Storage drawer
5
Appliance description
260437
Appliance interior equipment may change subject to appliance model.
The drawers are protected against pulling out. If you wish to remove a drawer, pull it out as far as
it will go, then lift its front part and pull it out completely.
* Only with some models.
A Refrigerator compartment
1 Control unit
2 Interior illumination lamp
3 Shelf (height adjustable)
4 Fruit and vegetables
bin / drawer
5 Refrigerator door rack (deep
and shallow version)
6 Bottle rack
B Standard freezer
(standard appliances)
7 Freezing drawer
8 Storage drawer
9 Storage drawer
10 Freezer door rack*
11 Water discharge groove*
12 Foot*
13 Wheel*
B NO FROST freezer
7 Storage drawer
8 Freezing drawer
9 Storage drawer
6
260437
Remark:
* Applies to OLD TIMER appliances.
Use the power cord to connect the appliance to the power
mains. The wall outlet should be tted with a ground contact
(safety socket). Nominal voltage and frequency are indicated
on the label with basic information on the appliance.
The appliance should be connected to the power mains and
grounded in compliance with the relevant effective standards
and regulations.
The appliance will withstand short-term deviations from the
nominal voltages, but not more than from -6 % to +6%.
Connecting the
appliance
• Handles are tted under the housing at the front side to
make moving the appliance easier (only with some models).
The appliance may stand freely or it can be placed next to a
kitchen furniture element or a wall. Mind the space required
to open the door and pull out the drawers and shelves (see
installation diagram).
8
260437
Required tools: socket spanner nr. 8, screwdriver, torx 25.
Caution! After unscrewing of before xing hinges, hold the door
to prevent it from falling and damaging.
1. Remove upper hinge cover (save it for eventual later use),
remove also the cover on the opposite side of the upper hinge
cover (on the opposite side you will insert the attached cover
during the assembly), and remove the cover on the opposite
side of the upper part of the door.
2. Unscrew upper hinge screws and remove the upper door from
the middle hinge.
3. On the bottom side of the upper door unscrew the swing
stopper screws and remove the stopper (A). Keep this for
eventual use later on. Fix the attached stopper with its
bearing on the opposite side of the door.
4. Unscrew the forced door closure system (B) and x it to the
opposite side of the door (certain models only).
5. Unscrew middle hinge screws, remove the door from bottom
hinge.
6. Loosen the screws xing the leg supports (certain models
only), then continue the procedure either under cf. 7 or 7.1,
depending on the model of the appliance.
7. Tilt the appliance backward (max. 35°) to lean to the rear
side of the cabinet. Unscrew the leg support screws (C) - left
and right, and remove the leg support cover (D) and place it
to the opposite side. Unscrew and remove, then reciprocally
replace the position of end switch (E) and decorative peg (F)
(for models with forced door closing system). Unscrew three
screws xing the bottom hinge (save the hinge for later use),
and x the attached bottom hinge on the opposite side.
7.1. Tilt the appliance backwards (max. 35°) to lean on the
housing at the back.
Loosen three screws holding the bottom hinge (save the
hinge for eventual subsequent door swing change). On the
opposite side af x the attached bottom hinge. Plug the holes
left after the replacement with relevant pegs.
8. Repeat the procedure 3 and 4 on the bottom door. In case
there is no bottom door limit peg, transfer the bearing (G) and
washer to the opposite side of the door.
9. Proceed with the assembly procedure in opposite sequence.
Remark:
At OLD TIMER appliances alteration of door opening direction
is not possible.
Version II
Changing the door
opening direction
10
260437
Switching the appliance on/off
Use the A switch to choose the freezer compartment. Then,
press and hold (for three seconds) the E key to switch on the
appliance. Both the refrigerator and the freezer compartment will
be switched on. When the appliance is on, the B signal light will
also be on. If the E key is pressed and held for three seconds
again, the entire appliance will be switched off.
Switching the refrigerator on/off
The models with the temperature display allow switching off the
refrigerator while the freezer continues to operate.
First, switch on the entire appliance. Then, select the refrigerator
compartment using the A switch. Press and hold the E key for
three seconds to switch off the refrigerator. When the E key is
pressed and held for three seconds again, the refrigerator will be
switched on again.
Setting the temperature in the appliance
Use the A switch to select refrigerator / freezer and press the E
key to set the desired temperature. The settings are changed
in circle, incrementally from maximum to minimum value (or to
“super freeze” – freezer boost function for the freezer). When
the desired temperature is set, the setting is automatically saved
after ve seconds and the current temperature in the selected
compartment is displayed.
Super freeze – freezer boost
Use the A switch to select the freezer compartment. Brie y press
the E key several times until SF is selected and wait for ve
seconds until the F light will light up.
If this setting is not deactivated manually, it will be activated
automatically (after approximately two days).
Use this setting after switching on the appliance for the rst time,
before cleaning, and when inserting major quantities of food into
the freezer.
Switching the appliance
on/off and setting the
temperature
17
260437
Appliance with Dual Compressor System
A Temperature setting and on/off knob for the freezer compartment
B Temperature setting and on/off knob for the refrigerator compartment
C Lighting on/off key
D Red LED: excessive temperature warning
CONTROL UNIT IV
19
Operating the mechanically controlled appliance
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gorenje nrk 68 syb bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gorenje nrk 68 syb in de taal/talen: Engels als bijlage per email.

De handleiding is 1,79 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info