335437
7
Verklein
Vergroot
Pagina terug
1/18
Pagina verder
Instructions for use, mounting and connection
46
Control elements
Once the glass ceramic hob is connected to the
mains (including the power failure), the appliance
carries out the harmonization with the conditions
of the exterior in order to provide most efficient
sensor function and render the best control
environment.
After the successful accommodation to the
environment, the indicators show the mark "-" for
a moment which eventually disappear.
The sound signal confirms the appliance is ready
for use.
Do not place any objects upon the sensor surface
during the accommodation period, otherwise you
may provoke error mode. In such cases the
process is interrupted and the appliance signals
error. The hob fails to respond to commands.
The hob is equipped with electronic sensors
which are switched on by touching or pressing the
sensor surface with your fingertip.
Each sensor reaction is confirmed by the beep.
Always take care to touch only one sensor at the
time for a short period of time (approximately 1
second). If more than one sensor is pressed at
the same time the relevant command is not
accepted. If the touch is prolonged it provokes
error mode and the appliance is switched off.
Do not place any objects upon the sensor surface
(error mode) nor any hot dishes which may
damage the sensors. Keep the sensor surface
clean at all times.
Switching the hob on
When the hob is turned off all the hotplates are
off and indicator LED's are off.
To switch the hob on, touch the ON/OFF sensor.
The hob is activated and all power displays
indicate »0« for a period of 10 seconds. Using the
(+) or (-) sensor you may select the desired
cooking power of a particular hotplate (see Power
Regulation).
Next setting of a particular hotplate should be
selected within ten seconds, otherwise the hob
will automatically be switched off and a short
warning beep is heard.
Switching the hotplates on
Once the hob is switched on with the ON/OFF
sensor, within the next ten seconds, while the
indicators are illuminated, you have to switch on a
particular hotplate by touching the (-) or (+)
sensors for the selected hotplate and set the
desired heating power.
If the power setting is not selected within the next
ten seconds, the "0" indicator turns off and the
hotplate will automatically be switched off.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gorenje ect 680 al bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gorenje ect 680 al in de taal/talen: Engels als bijlage per email.

De handleiding is 1,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Gorenje ect 680 al

Gorenje ect 680 al Gebruiksaanwijzing - Deutsch - 24 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info