330546
9
Verklein
Vergroot
Pagina terug
1/29
Pagina verder
Instructions for use, installation and connection
41
Procedure
Connect the probe and stick it into the meat.
Select the appropriate roasting mode by the
food selection sensor (1) or by the function
mode sensor (2). The display (d4-6a) indicates
the actual meat temperature, while the display
(d4-6b) indicates the preset temperature of
80°C. This value may be changed at any
moment by pressing sensors (4a/4b) in the
temperature range between 30 and 99°C in 1°C
intervals.
Switch the oven on with the ON/OFF sensor (5)
and the meat probe starts measuring the core
temperature, which is increasing.
Once the set temperature of the meat core is
obtained, the oven stops operating, and the
sound signal indicates the end of operation.
The beep may be turned off by touching any of
the sensors (except for the ON/OFF sensor (5),
which turns the sound signal off but switches
the oven back on).
If the oven is not switched off it will switch
back on after some time (when the actual
temperature falls below the preset value).
This way the actual temperature of the food
is maintained.
Pull the probe from meat and pull the plug from
the socket. The display (d4-6) indicates the
actual current time of day.
Use of meat probe in combination
with the timer functions (for
experienced users)
When using the meat probe you may also set the
operation time or the end of operation, as
described in previous paragraphs. But always
remember:
If you use the preset time operation mode
(d4-1) and set the desired period, the oven will
stop operating when the time elapses, irrelevant
of whether the actual temperature of the food
has reached the preset temperature. Therefore
the preset operation time must always be
somewhat longer that the time necessary for
food to reach the appropriate temperature.
The same procedure is identical for the end of
operation function mode (d4-2).
This combination is suggested once the user
has gained certain experience regarding the
time required for particular sort and quantity of
food to be roasted appropriately roasted at a
preset temperature.
According to these information gained with
experienced use, you may set the oven
operation time (d4-1) somewhat longer than
required, thereby successfully using also the
end of operation mode (d4-2).
Note
With the meat probe connected the display
always indicates the actual and the selected
temperature (except with the oven off, when no
function mode is selected).
In case you had already selected the particular
type of food with the food selection sensor (1)
and the preset operation time, the time setting will
be rendered void at the moment of connecting
the probe. This happens also with all other cases.
The time may of course be preset again.
If the oven is off and the meat probe is
connected, the meat probe symbol starts flashing
(d4-3) as an alert that the probe is active.
CAUTION
Use only the meat probe designed for this
particular oven.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gorenje b 50 ep bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gorenje b 50 ep in de taal/talen: Engels als bijlage per email.

De handleiding is 0,96 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info