801628
6
Do not connect the appliance to an electrical outlet intended
for an electric shaver or a hair dryer.
The power socket has to be safely earthed, and the water
supply should be unimpeded.
Do not install the appliance in a room where the
temperature can drop to below 5°C, as appliance parts
may be damaged in case of water freezing.
Place the appliance on a level and stable solid (concrete)
base.
If the appliance is placed on an elevated stable base, it has
to be additionally secured against tipping.
Before using the appliance for the first time, remove the
blocking screws/rods, as switching on a blocked appliance
can result in major damage (see chapter »INSTALLATION
AND CONNECTION / Removing the blocking screws/rods«).
Warranty shall be void in cases of such damage!
To connect the appliance to water supply make sure to
use the supplied water supply hose and gaskets. Water
pressure has to be between 0.1 and 1 MPa (approximately
1–10 bar or 1–10 kp/cm
2
; 10–100 N/cm
2
).
Always use a new water supply hose to connect the
appliance to water supply; do not reuse an old water supply
hose.
The end of the drain hose may not be immersed flowing
draining water.
