512798
19
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
Instructions for Use
Washing machine
231991
Thank you for your con dence in purchasing our washing machine, and congratulations on the
excellent choice.
Your new washing machine meets the requirements of modern treatment of laundry. It is rational in
the consumption of energy, water and washing agents.
Our appliances are friendly to the environment. Some of the materials may be recycled, others
deposited or decomposed. To avoid pollution of environment, once your appliance is no longer
useful, take it to your local authorized waste appliance dealer.
The appliance is intended exclusively for use in households. If the appliance is used for
professional purposes, for pro t, or for purposes beyond regular use in a household, or if appliance
is used by a person who is not a consumer, the warranty period equals the shortest warranty period
possible as stipulated by the relevant legislation.
Description of washing machine ..................................3
Cautions ..........................................................................4
Installation and connection ...........................................5
Operation .........................................................................8
Tips for washing and energy saving ..........................13
Cleaning and maintenance ..........................................14
Failures ..........................................................................16
Tables ............................................................................20
2
231991
Dimensions (w x d x h): 600 mm x 600 mm x 850 mm
Dimensions (w x d x h): 600 mm x 440 mm x 850 mm
Depth with door open: 106 cm / 88 cm (depending on model)
Weight (net): 90 kg / 76 kg (depending on model)
Nominal voltage: 230 V, 50 Hz
Power: 2300 W / 2200 W (depending on model)
Max. load: 7 kg / 6 kg / 4,5 kg (depending on model)
Power socket: (230 V, 50 Hz, 10 A)
Water pressure: min. 0,05 MPa, max. 0,8 MPa
Fuse: 10 A
1. Front panel
2. Detergent dispenser
3. Door
4. Filter lid
5. Adjustable legs
6. Water outlet hose
7. Water inlet hose
8. Mains power cable
3
Description of washing machine
Technical information
(depending on model)
231991
Be sure to remove transport brackets prior rst use of the appliance. Attempted operation of the
blocked machine may result in irreparable damage which is not covered by the manufacturer’s
warranty!
When connecting your washing machine to water supply, be sure to use brand new water inlet
hose and appropriate sealing gaskets (attached).
Do not locate the machine in a room with temperature below 0°C. Parts of the machine may be
damaged if frozen.
Install the washing machine in a perfectly horizontal position, on solid at concrete oor.
Follow the instructions for correct installation and water and mains connections.
Never immerse the end of the drain hose into the draining water.
Prior starting the washing cycle lock the door by pressing them at the designed spot.
Door may not be open during the washing cycle.
Use only detergents and softeners for machine wash. Manufacturer may not assume
responsibility for any damage and eventual discoloring of gaskets and plastic components as a
consequence of incorrect use of bleach and/or coloring agents.
For removal of lime residues use such agents with added anti-corrosion agents. Follow the
manufacturer’s instructions. Finish the lime removal by multiple rinsing to remove completely
eventual acid residues.
Never use detergents containing solvents, since there is a danger of creating toxic gasses which
may damage the machine and result in ignition or explosion.
Upon completion of washing operation close the water faucet.
Before any transport block the machine by inserting at least one transport blocking rod. Prior this
operation disconnect the appliance from the mains power!
Rating plate with basic information is located above the opening of the machine.
The warranty shall not apply to consumables (bulbs), minor discoloration or deviations of color,
increased noise level as a consequence of appliance age, which does not affect appliance
functionality, and aesthetical de ciencies which do not affect appliance functionality or safety.
The appliance is manufactured in compliance with all relevant safety standards; however, it is
recommended that persons with impaired physical, motional, or mental abilities, or persons with
inadequate experience and knowledge, do not use the appliance without due supervision. The
same recommendation applies to minors using the appliance.
Before connecting the appliance read these instructions carefully. Repairing the failure
arising from inappropriate connections or use of the appliance is not covered by the
guarantee.
The symbol on the product or on its packaging indicates that this product may not
be treated as household waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic equipment. By
ensuring this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of thisproduct. For more
detailed information about recycling of this product, please contact your local city
of ce, your household waste disposal service or the shop where you purchased the
product.
4
Cautions
231991
In removing the wrapping be careful not to damage the
appliance with a sharp object.
Before connecting the appliance, let it warm up to room
temperature (wait for two hours).
Our appliances are packed in environmentally friendly
materials which may be recycled, deposited or decomposed
without any threat to the environment.
To this end all wrappings are marked accordingly.
Move the pipes.
Loosen screws A at the rear of the machine (Fig. 1).
Remove the brackets B (Fig. 1) and slide them into the groove
on the blocking rod (Fig. 2) - the right one should be turned
around.
Use the brackets to rotate blocking rods for 90° and pull them
out.
Close the openings with attached plastic pegs.
Save transport brackets for eventual later use.
Be sure to remove the transport brackets prior rst
use, otherwise the appliance may be permanently
damaged. In such cases the warranty conditions are
void.
Fig. 1 Fig. 2
Put the appliance in horizontal position by turning the
adjustable legs.
The legs are adjustable up to +/- 1 cm.
After the adjustment tighten the nuts rmly (A) - towards
the bottom of the machine!
Vibrations, moving of the appliance and loud operation
due to incorrect setting of the adjustable feet shall not
be covered by this warranty.
The appliance should be placed on a surface with
concrete base; the surface should be dry and clean in
order to prevent slipping. The adjustable feet should
also be cleaned before installation.
Package removalPackage removal
Removal of transport
brackets
Removal of transport
brackets
Leveling the applianceLeveling the appliance
5
Installation and connection
231991
If you have a tumble dryer of the same dimensions, you can
place it on top of the washing machine.
To ensure correct operation of the appliance, water
pressure inlet must be between 0,05 and 0,8 MPa.
Minimum water pressure can be established by
measuring the quantity of poured out water. 3 litres of
water must be poured out from completely opened tap
in 15 seconds.
Take the water inlet hose from the drum and attach the inlet
hose angle extension (1) to the washing machine by screwing
it onto the provided thread (certain models only).
Insert the gasket with a lter net into the straight inlet hose
attachment nut (2) and screw the nut onto the water tap.
(With some models, the gasket with lter net is already tted
and any additional tting into the nut on the straight attachment
is not required).
In case of hot and cold water connection, connect one hose to
cold and other to hot water faucet as marked at the rear of the
appliance (letters C and H) (C - cold; H - hot)
The inlet hose should be tightened manually, rmly
enough to prevent any leaks. After tightening the hose,
check for any leaks.
Use of pliers, wrenches, or other similar tools is not
allowed when installing the hose, as these tools can
damage the nut thread.
Fix the outlet hose to run into the sink or the bathtub, or
connect it directly to the wall drain outlet (diameter min. 4 cm).
Wall drain must be installed properly and must enable
occasional cleaning.
Fasten the outlet hose support with a piece of rope led through
the hose elbow, to prevent the hose from slipping to the oor.
The end of outlet hose should be placed between minimum 60
cm and maximum 100 cm above the oor level.
Water inlet connectionWater inlet connection
Water outlet connectionWater outlet connection
6
231991
Plug the mains power cable to the wall mains socket.
Required voltage and other information are written on the
rating plate above the door opening of the machine.
The wall socket must be accessible at all times and
must be equipped with an earth lead (in accordance
with the local safety regulations).
The permanent connection must be tted by an
authorized personnel only.
Damaged mains power cable may be replaced only by
the producer or his authorized personnel.
Never plug the appliance into the electric shaver socket
or hair dryer socket.
Connect the appliance to
the mains supply
Connect the appliance to
the mains supply
7
231991
Open the door of the machine
Load the laundry into the drum
Close the door
Open the water inlet faucet
Push the ON/OFF button and select the program
Add washing and treatment agents (detergent and softener)
Start the operation by pushing the START knob (C)
Washing procedureWashing procedure
A - program selector
B - pump stop knob
C - START/PAUSE knob
Signal LED’s:
- ON/OFF (orange)
- pump stop/failure (green)
8
Program selector Basic programs Partial programs
Cotton
Pre-wash
Short program
Quick program
Rinse
Synthetics
Quick program
Softening
Delicate Pumping water
Wool Spinning
Operation
231991
- Open the door of the machine.
Door is opened by pulling the handle (lever) on the right hand
side of the door towards you.
- Sort the laundry by the type of fabrics.
Do the buttons and zippers, tie the strings and pull out
the pockets.
Very delicate laundry should be put in a special
protective sack.
It is suggested to load the drum with items of different
sizes.
Pay attention to the labels on the clothes, indicating
the recommending washing mode (see table of
textile treatment symbols on the last page of these
instructions).
- Load the laundry into the drum.
Check that the drum is empty.
- Close the door of the appliance.
- Open the water inlet faucet.
- Push the ON/OFF button and select washing program.
Program is selected by turning the program selector (A) from the
“0” position to the desired washing program. The ON/OFF signal
LED starts ashing. The program selector (A) may be turned in
both directions, and the appropriate program selected according
to the type of laundry washed and the required washing
temperature (see Program Chart for help). You may select basic
or partial programs.
Selected program may be changed at random prior pushing the
START button (C).
- Selection of basic programs (
, , , )
Basic programs represent integral programs containing all
washing stages, including softening and spinning (see Program
Chart). They are selected by turning the program selector to the
appropriate position.
Cotton: whites/colored
Normally stained cotton and ax bed linen and underwear, table
cloth, bathroom towels, top garments, etc.
For less stained laundry of this type, use quick program
. It
saves energy and washing time.
For heavily stained permanent press use the program with the
pre-wash
.
For smaller loads (non-delicate cotton, linen, synthetic, and
mixed fabric) and smaller quantities of soiled laundry (laundry
refreshment, laundry wet with perspiration, etc.), we recommend
Washing machine
operation
Washing machine
operation
9
231991
the use of the quick program. This way, you will save both
energy and time.
Synthetics
Normally stained shirts, blouses and other polyester and
polyamide garments, or a mixture of these fabrics with cotton.
For less stained laundry of this type, use short program. It saves
energy and washing time.
Delicate
This is a program for delicate fabrics (dresses, skirts, blouses)
and curtains.
Wool
Especially gentle program for washing wool and garments made
from mixture of other fabrics with wool, appropriately marked for
machine washing.
- Selection of additional function
Pump stop
This function is switched on after the selection of a basic
program by pressing the
knob (B). It may also be switched
on during the operation, prior last rinse. Indicator LED above
the washing cycle symbol is lit.
The function is switched off by pressing the same knob again
- signal LED is off.
The program stops at the end of last rinse, prior spinning:
laundry remains soaked in water and prevents crease, if
you are unable to remove it from the drum immediately after
the end of washing cycle. Indicator LED above the knob is
ashing.
The selected program is completed by pushing the START
button (C), but you may also apply additional programs
(pumping or spinning), but you must rst return the program
selector to the “0” position for at least one second, prior
selecting any of the additional programs.
When program continues, indicator LED above the knob goes
off.
- Selection of partial programs (
, , , )
These are independent programs and may be used when you do
not need the entire washing program. In case you would like to
use more additional programs in a sequence, you must turn off
the appliance prior any new program selection (turn the program
selector (A) to “0” for at least one second).
10
231991
Rinse
Independent program for rinsing delicate laundry, without
intermediate spinning and with short nal spin. You may use it for
rinsing manually washed delicate laundry or for extra rinsing for
people with skin sensitive to detergents.
Softening
This program is intended for softening, bleaching or impregnating
of washed laundry. It is completed with spinning at max. 1000
RPM.
Pumping the water out
Use it when the washing program was interrupted or if pump stop
function was engaged, and you only wish to pump the water out
of the drum, without spinning.
Spinning
Aggressive spinning for non-delicate laundry at high spin RMP.
- Adding washing and softening agents
(see Tips for washing and energy saving)
• pre-wash compartment
• main wash compartment
• softener compartment
Washing detergent may be added directly into the drum, using
the measuring vessel.
When adding softener, be careful to ll the dispenser
only up to the marked level.
Be sure to close the detergent dispenser when
opening/closing the appliance door.
Push the START button (C). The ON/OFF LED stops ashing,
the machine starts operating after a few seconds. If the door
is not properly closed after starting the operation, the ON/OFF
LED starts ashing again after a few seconds. When you close
the door, the machine initiates the selected program.
In case you would like to alter the washing program after the
initiated washing operation, turn the program selector for one
second to the position “0”, followed by the selection of a new
program. Switching the machine off deletes any previously
selected additional functions (i.e. PUMP STOP)
, so they
have to be reactivated.
Start the operationStart the operation
11
231991
- End of operation
Flashing START/STOP LED indicates that the program was
completed.
Extract the laundry from the drum and remove any alien
objects from the door gasket.
Leave the door ajar to allow the interior to dry.
Close the water inlet faucet.
Switch the machine off by turning the program selector to
position “0”.
Pull the power lead from the socket and cut the power supply
from the mains.
By the user
Selecting Pump stop function
Program is stopped when it comes to the ‘PUMP STOP’
stage (if this function had been previously selected). Drum door
remains closed all the time. Indicator LED above the ‘Pump
stop’ function starts ashing. Washing procedure is continued by
pressing the START knob (C).
Own (physical) interruption
You may also stop the program by turning the program selector
to the position “0”. If there is water in the drum select one of
additional programs (pumping
, spinning ) to empty the
water and terminate the program.
Pause knob
By pressing the PAUSE knob (C) program may be suspended
at any time. After certain time you may open the door if there is
no water in the drum, otherwise this is not possible. Program is
continued by pressing the START knob (C).
Failures
Program is suspended in case a failure occurs. Signal LED’s
are ashing (see cf. Troubleshooting).
Power failure
At electric cutout the program is interrupted, however, after the
power supply has been re-established, the program operation
automatically proceeds.
If a power failure occurs when the drum is still full of
water, be careful not to open the door before you pump
the water out.
InterruptionsInterruptions
12
231991
Before washing sort out the laundry according to the type, degree of dirtiness and color fastness.
Prior selecting the washing program consult the sewn tab with information on a particular piece
of laundry (see Maintenance chart on the last page).
Wash separately the new colored textile products for the rst time.
Wash heavily soiled laundry in small quantities and add more detergent.
Treat stubborn stains with special stain remover, it will save energy.
With lightly stained laundry select washing program without pre-wash, use short program and
select lower washing temperature. This way you may save up to 50% of energy.
Avoid washing too little quantities of laundry because of energy saving and for better
performances of the appliance.
The largest allowed quantity of dry laundry is indicated in the Program chart.
Before washing empty the pockets, close zip fasteners, and remove any metal fasteners or
badges that might clog the drain or damage the laundry or drum interior.
Loosen the stacked laundry prior inserting it into the drum.
Use only detergents for machine wash.
Add powder or liquid detergents according to the manufacturer’s instructions.
If water hardness level exceeds 14°dH degrees, the use of water conditioner is required. Any
damage to the heater due to failure to use a water conditioning agent shall not be covered by
this warranty.
Chlorine-based whitening agents are not recommended, as it can damage the heater.
• If you do not apply the program which includes the pre-wash
feature, you may add washing detergent directly into the drum.
If you use thick liquid softener it is recommended to dilute
it with water, to prevent clogging of dispenser compartment
ducts.
Washing machine is equipped with the dispenser partition
gate, so you may pour liquid detergent also into the central
compartment (depending on model). If you use powder
detergent the gate is lifted up, and in case of liquid detergent it
is slid down.
Liquid detergents are intended for main wash only, without
pre-wash.
Insert particularly delicate linen (stockings, delicate female
underwear, etc.) into the special bag.
13
Hardness
scale
Degree of hardness
°dH(°N) m mol/l °fH(°F) p.p.m.
1 - Soft < 8,4 < 1,5 < 15 < 150
2 - Medium 8,4 - 14 1,5 - 2,5 15 - 25 150 - 250
3 - Hard > 14 > 2,5 > 25 > 250
In case of hard water add detergent according to the Chart for
degree 1 and add appropriate quantity of water softener (see
manufacturer’s instructions).
Tips for washing and energy saving
231991
Disconnect the washing machine from the mains
before cleaning!
The casing should be cleaned with soft cloth and mild
detergent.
The interior of the drum and the door gasket is cleaned by
washing at 60°C without laundry and adding half quantity of
detergent.
Frequent use of low-temperature programs in combination
with liquid detergents can lead to development of germs which
cause odor in the washing machine.
To prevent this, it is recommended to run the Cotton 95°C
program without any laundry at least once per month, using
powder detergent.
If necessary, clean the detergent dispenser. Pull it out from its
casing completely by pressing the ap (see Fig.).
If necessary, clean the cover of the bung under the running
water.
High spin RPM leave less moisture in laundry which dries out
much quicker in the tumble dryer, thereby saving energy.
Do not put clods of detergent into the soap dispenser
as the tube in the washing machine may clog.
14
Cleaning and maintenance
231991
Wash it under running water using a brush, and dry it. Remove
any leftover dried detergent from the bottom of the casing.
Clean the entire rinsing area of the washing machine with a
brush, especially the nozzles on the upper side of the rinsing
chamber.
Clean frequently the water inlet hose screen under running
water.
After each wash wipe the door rubber gasket. This will prolong
its useful life.
• Open the lter lid using at screwdriver or similar tool.
Filter needs occasional cleaning, especially following heavily
shaggy or old laundry.
15
231991
Before cleaning, drain any water from the machine via drain
pipe (certain models only).
Turn it anti-clockwise, pull it out and clean under running
water.
• Insert the lter back as shown on the picture, and tighten by
turning it in clockwise direction. To ensure good sealing the
gasket surface (A) must be dirt free.
The washing machine automatically monitors the execution of particular functions during the
operation, and reports any detected failures. In such cases both signal LED’s start ashing in
certain sequence. Flashing sequence changes in accordance with the nature of the detected
failure.
In some cases you may attempt removing certain failures yourself, so count the number of ashes,
repeating after certain pauses.
The machine signals failures immediately after detecting them and stops the program, except for
heater failure, where the machine completes the washing program without heating water.
Failures:
2 - Two ashes: door is not correctly closed
3 - Three ashes: inappropriate water intake
7 - Seven ashes: inappropriate water outlet.
In these cases, you will be able to remedy the failure by yourself (See Troubleshooting table).
1 - One ash: temperature sensor failure
4 - Four ashes: spinning sensor failure
5 - Five ashes: motor failure
16
Failures
231991
6 - Six ashes: Heater failure
In these cases, turn off the machine, then turn it back on and repeat the program. If the failure
reoccurs, contact your nearest authorized service center. The LEDs will continue to ash until the
machine is turned off.
Interferences from the ambient (for example electrical wiring) could induce signalization of different
faults. In such cases:
- switch the appliance off, and wait for a few seconds;
- switch the appliance back on and repeat the washing program.
If the fault repeats, call authorized service shop.
Warranty shall not apply in case of failures due to interferences from the environment (lightning
stroke, power supply circuit faults, natural disasters).
17
Failure Possible cause Remedy
The machine does not
work (symbols are not
illuminated).
Machine is not powered. Check if:
• power in the socket,
• the fuse is OK,
• plug is in the socket.
FAILURE 2
Washing program does
not start
At the beginning of the
washing program: on/off
LED is ashing
During washing: LEDs
periodically ash twice
Door is not properly closed. Push it towards the machine.
FAILURE 3
Water does not enter the
machine (after approx. 4
min the machine reports
failure - LEDs periodically
ash three times).
Disturbed water inlet.
Check if:
• the water tap is open,
• inlet pipe net lter is clean.
Push the START button.
Water is leaking from the
machine.
Filter is not tightly screwed in.
Inlet pipe is not tightly screwed
to the machine or to the water
faucet.
Outlet pipe fell to the oor.
Tighten the lter properly.
Tighten the inlet pipe.
Af x the outlet pipe to the drain.
The machine moves
during operation.
The machine is not properly
leveled.
Transport brackets are not
removed.
Level the machine with the
adjustable legs.
Remove transport brackets.
The machine vibrates
during the spin.
Unevenly distributed laundry,
especially with very small
quantities (for ex. only the
bathrobe).
This is normal, the machine will
reduce the RPM if vibrations are too
strong.
Wash larger quantity of laundry.
231991
18
Failure Possible cause Remedy
Excessive foaming during
washing.
Excessive measure of
detergent.
Use washing powder according to
the instructions by the producer and
according to the water hardness and
soiled laundry. Use only detergents
for machine washing.
FAILURE 7
Water is poorly pumped
out or not at all (machine
reports failure - the LEDs
periodically ash seven
times).
Water outlet is clogged Check if:
• the lter is clean,
• outlet pipe is not jammed,
• the drain is clogged,
• outlet pipe is positioned higher than
1m.
Push START again
Laundry is not properly
spun.
No failure is reported.
The machine switched on the
UKS function. Because of bad
laundry balance, the machine
has automatically reduced spin
RPM.
The machine operates normally.
Wash large and small pieces of
laundry together.
Greasy wads appear on
the laundry.
Too little detergent (laundry was
very greasy).
Wash the laundry again.
Add more detergent for such soiled
laundry, or use liquid detergent.
Laundry is stained after
washing.
You used liquid detergent or
detergent for colored laundry
which does not contain
whitener.
Use the detergent containing
whitener.
White powdery residues
on the laundry.
It is not the consequence of
bad rinsing, but because of
neo-phosphate detergents
containing non soluble
components (zeolites) for water
softening. Such substances may
be deposited upon the laundry.
Immediately rinse the laundry once
again.
Use liquid detergents which do not
contain zeolites.
Try removing the residues with the
brush.
Detergent residues in the
dispenser.
Low water ow pressure.
Some detergents may stick to
the dispenser rather hard if it
is wet.
Clean the inlet pipe lter net.
In case of low water pressure
increase water level.
• Wipe the dispenser prior loading
detergent.
Softener is not completely
rinsed, or water is left in
the dispenser dish.
Sucking cover is not correctly
positioned or is clogged.
Clean the dispenser and rmly x the
cover to its place.
Unpleasant smell in the
washing machine drum.
Remains of fabrics, washing
agent and softener in the lter.
• Development of germs
Check whether the lter is clean.
Run the Cotton 95°C program
without any laundry, using a powder
detergent.
231991
In case you were not successful in repairing the malfunctions in
spite of the above suggestion chart, call the nearest authorized
service shop.
Repairing the failure arising from inappropriate connections or
use of the appliance is not covered by the guarantee, and the
repair expenses are paid by the customer.
* UKS: universal stability control - this function prevents excessive vibrations during spinning.
19
Failure Possible cause Remedy
Washing time is longer
than usual.
Low temperature of inlet water.
Due to unevenly distributed
load, the machine has
activated the UKS*.
Low mains voltage.
There has been a failure in the
power supply.
Washing program time may be up
to 60% longer; however, this does
not imply a fault in the machine.
Washing time is extended by the
power supply down-time.
FAILURE 1
Program temperature not
reached (the machine
reports a failure - the
LEDs periodically ash
once)
Temperature sensor
disconnected from the electronic
circuit.
Turn off the appliance and wait for
a few seconds;
turn the appliance back on and
repeat the washing program.
If the failure is reported again, call a
service technician.
FAILURE 4
Spinning rpm not reached
in the selected program
(the machine reports
a failure - the LEDs
periodically ash four
times)
rpm sensor disconnected
Motor overload due to too high
water level (manual addition of
water) or too big laundry load
• Motor failure
Turn off the appliance and wait for
a few seconds;
turn the appliance back on and
repeat the washing program.
If the failure is reported again, call a
service technician.
FAILURE 5
Motor operation
interrupted; or motor does
not operate (the machine
reports a failure - the
LEDs periodically ash
ve times)
Motor overload or motor failure. Turn off the appliance and wait for
a few seconds;
turn the appliance back on and
repeat the washing program.
If the failure is reported again, call a
service technician.
FAILURE 6
Program temperature not
reached (the machine
reports a failure - the
LEDs periodically ash six
times)
• Heater failure
Inlet water too cold
Manual addition of water
Turn off the appliance and wait for
a few seconds;
turn the appliance back on and
repeat the washing program.
If the failure is reported again, call a
service technician.
231991
z possible
* Testing program by EN 60456 with the selection of max. spin
RPM.
** depending on model.
20
Basic program
Max. load (kg)
Temp. (°C)
Spin (max. RPM)
Duration (min.)
Water cons.
L
Energy cons.
kWh
Additional function
Pump stop
RPM RPM
400 - 700
800 - 900
1000 - 1300
400 - 1300
Cotton - white 7 95
1300
156 72 67 62 2,31/2,19**
z
Cotton - color * 7 60 147 66 61 56
1,33/1,19**
z
Cotton + prewash 7 60 172 76 71 66 1,45/1,32**
z
Cotton 7 40 121 66 61 56 0,67
z
Cotton - quick 7 40 77 66 61 56 0,58
z
Cotton - quick 17’ 2 30 1000 17 40 40 40 0,17
z
Synthetics 3,5 60
1000
116 51 51 51 0,97
z
Synthetics 3,5 40 105 48 48 48 0,56
z
Synthetics - quick 3,5 40 55 48 48 48 0,50
z
Delicate 3 30 700 53 62 62 62 0,39
z
Wool 2 30 600 46 42 42 42 0,20
z
Partial programs
Rinse 3,5 700 25 40 0,02
Softening 7 1000 15 18 0,02
Pumping water 7 - 2
Spin 7 1300 12 0,03
Tables
Program chart
- 7 kg
231991
z possible
* Testing program by EN 60456 with the selection of max. spin
RPM.
** depending on model.
21
Basic program
Max. load (kg)
Temp. (°C)
Spin (max. RPM)
Duration (min.)
Water cons.
L
Energy cons.
kWh
Additional function
Pump stop
RPM RPM
400 - 700
800 - 900
1000 - 1300
400 - 700
800 - 1300
Cotton - white 6 95
1300
139 68 63 58 2,30/2,10** 2,10/2,05**
z
Cotton - color * 6 60 140/150 62 57 52
1,30/1,14** 1,14/1,02**
z
Cotton + prewash 6 60 165 70 65 60 1,50/1,34** 1,34/1,22**
z
Cotton 6 40 116 62 57 52 0,70/0,66** 0,66
z
Cotton - quick 6 40 72 62 57 52 0,55 0,55
z
Cotton - quick 17’ 2 30 1000 17 40 40 40 0,17 0,17
z
Synthetics 3 60
1000
111 43 43 43 0,93 0,93
z
Synthetics 3 40 100 40 40 40 0,52 0,52
z
Synthetics - quick 3 40 49 40 40 40 0,47 0,47
z
Delicate 2,5 30 700 53 58 58 58 0,36 0,36
z
Wool 2 30 600 46 42 42 42 0,20 0,20
z
Partial programs
Rinse 3 700 25 40 0,02
Softening 6 1000 15 16 0,02
Pumping water 6 - 2
Spin 6 1300 12 0,03
Program chart
- 6 kg
231991
z possible
* Testing program by EN 60456 with the selection of max. spin
RPM.
22
Basic program
Max. load (kg)
Temp. (°C)
Spin (max. RPM)
Duration (min.)
Water cons.
L
Energy cons.
kWh
Additional function
Pump stop
Cotton - white 4,5 95
1400
140 47 1,80
z
Cotton - color * 4,5 60 145 44 0,85
z
Cotton + prewash 4,5 60 172 49 0,99
z
Cotton 4,5 40 116 44 0,51
z
Cotton - quick 4,5 40 70 44 0,46
z
Cotton - quick 17’ 2 30 1000 17 30 0,13
z
Synthetics 2 60
1000
112 31 0,61
z
Synthetics 2 40 100 29 0,34
z
Synthetics - quick 2 40 50 29 0,20
z
Delicate 1,5 30 700 48 45 0,15
z
Wool 1 30 600 45 38 0,15
z
Partial programs
Rinse 1,5 700 25 30 0,02
Softening 4,5 1000 15 10 0,02
Pumping water 4,5 - 2 -
Spin 4,5 1400 12 - 0,03
Program chart - 4,5 kg
231991
We reserve the rights to make any changes or mistakes in these operation
instructions.
23
Normal wash
Delicate wash
Max.
washing
temp. 95°C
Max.
washing
temp.
60°C
Max.
washing
temp.
40°C
Max.
washing
temp.
30°C
Manual
washing
Washing
not
allowed
Whitening Whitening in cold water
Whitening not allowed
Ironing Hot iron max.
200°C
Hot iron max.
150°C
Hot iron max.
110°C
Ironing not
allowed
Dry cleaning Dry cleaning in all
solvents
Perchlorin-
etyhlene
R11, R113,
Kerosene
Dry cleaning in
kerosene, in pure
alcohol and in
R 113
Dry cleaning not
allowed
Drying Place on
at surface
Hang wet Hang
High
temperature
Low
temperature
Tumble drying
not allowed
Maintenance chart
PS PG1 OEM 231991/en/ (10-09)
19

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gorenje WA1067 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gorenje WA1067 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,12 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info