512912
28
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
EN
DETAILED
INSTRUCTIONS
HOW TO USE YOUR
WASHING MACHINE
We thank you for your trust
and the purchase of our washing
machine.
Your new washing machine complies
with the requirements of modern
laundry care. Your laundry will
be impeccably white even at low
temperatures, owing to special
washing programs like Ultra White.
SensoCare technology allows simple
control of the washing machine.
Your washing machine is highly
economical when it comes to use of
power, water, and detergent.
The washing machine is intended
exclusively for use in households, for
washing the laundry that is indicated
as machine washable.
3
Table of contents
392477
STEPS OF THE
WASHING
PROCESS
CLEANING &
MAINTENANCE
OF THE
APPLIANCE
INTRODUCTION
TROUBLE-
SHOOTING
PREPARING
THE APPLIANCE
FOR THE FIRST
USE
OTHER
4 SAFETY PRECAUTIONS
8 WASHING MACHINE
9 Technical information
10 Front panel
12 INSTALLATION AND CONNECTION
12 Removal of transport brackets
13 Selecting the room
13 Installation
15 Water inlet connection
16 Aqua-stop
16 Total aqua - stop
17 Water outlet connection
18 Connect the appliance to the mains supply
19 Moving and transport
19 Subsequent transport
20 BEFORE THE USE
21 WASHING STEPS (1 - 7)
21 1. Step: Check the tags on your laundry
22 2. Step: Preparing the washing process
24 3. Step: Choosing a programme
27 4. Step: Choosing the settings
29 5. Step: Selecting additional functions
31 6. Step: Program start
31 7. Step: End of washing program
32 CLEANING AND MAINTENANCE
32 Cleaning the detergent dispenser
33 Cleaning the dispenser housing, inlet hose screen and door rubber
gasket
34 Cleaning the filter
35 Cleaning the washing machine
36 INERRUPTING AND CHANCHING THE PROGRAM
38 What to do ...?
39 Troubleshooting table
41 RECOMMENDATIONS FOR WASHING AND ECONOMIC USE YOUR
WASHING MACHINE
43 Grandma's advice for natural stain removal
45 DISPOSAL
46 TYPICAL CONSUMPTION TABLE
4
SAFETY PRECAUTIONS
392477
Please, do not use the washing machine
without reading and understanding these
instructions or use first.
Be sure to remove transport brackets
prior first use of the appliance. Attempted
operation of the blocked machine may
result in irreparable damage which is not
covered by the manufacturer’s warranty!
When connecting your washing machine
to water supply, be sure to use the supplied
water inlet hose and sealing gaskets.
Failure to observe the instructions for
use or inappropriate use of the washing
machine may result in damage to the
laundry or machine, or injury to the user.
Keep the instructions for use handy, near
the washing machine.
Do not install the machine in a room where
temperature can drop below 0°C. Parts of
the machine may be damaged if the water
inside them freezes.
Install the washing machine in a perfectly
horizontal position, on solid flat (concrete)
floor.
Follow the instructions for correct
installation and water and mains
connections (see chapter "Installation and
connections").
Never immerse the end of the drain hose
into the draining water.
Prior starting the washing cycle lock the
door by pressing them at the designed
spot.
Door may not be open during the washing
cycle.
We recommend running the self-cleaning
program before the first wash in order to
remove any impurities from the washing
machine drum. (See chapter on” Selecting
additional functions”.
Use only detergents and softeners for
machine wash. Manufacturer may not
assume responsibility for any damage and
eventual discolouring of gaskets and plastic
components as a consequence of incorrect
use of bleach and/or colouring agents.
For removal of lime residues use such
agents with added anti-corrosion agents.
Follow the manufacturer’s instructions.
Finish the lime removal by multiple rinsing
to remove completely eventual acid
residues (e.g. vinegar etc.).
Never use detergents containing solvents,
since there is a danger of creating toxic
gasses which may damage the machine and
result in ignition or explosion.
This product does not release silver ions
during the washing cycle.
Upon completion of the washing cycle,
close the water faucet and unplug the
mains cord.
Before transporting the machine after it
has been used, block the drum by inserting
at least one transport blocking rod.
Disconnect the appliance from the mains
power before inserting the rod!
5
392477
Rating plate with basic information is
located above the opening of the machine.
Leave any repairs and similar tasks
on the washing machine to an expert.
Unprofessional repair may result in an
accident or major malfunction.
The warranty shall not apply to
consumables, minor discoloration or
deviations of colour, increased noise level
as a consequence of appliance age, which
does not affect appliance functionality, and
aesthetical deficiencies which do not affect
appliance functionality or safety.
The appliance is intended exclusively
for use in households. If the appliance is
used for professional purposes, for profit,
or for purposes beyond regular use in a
household, or if appliance is used by a
person who is not a consumer, the warranty
period equals the shortest warranty period
possible as stipulated by the relevant
legislation.
6
392477
CHILDREN UNDER 3 YEARS SHOULD BE KEPT
AWAY FROM THE MACHINE UNLESS THEY ARE NOT
CONSTANTLY SUPERVISED AT ALL TIMES.
THE APPLIANCE IS MANUFACTURED IN COMPLIANCE
WITH ALL RELEVANT SAFETY STANDARDS.
THIS APPLIANCE CAN BE USED BY CHILDREN
AGED FROM 8 YEARS AND ABOVE AND PERSONS
WITH REDUCED PHYSICAL, SENSORY OR MENTAL
CAPABILITIES OR LACK OF EXPERIENCE AND
KNOWLEDGE IF THEY HAVE BEEN GIVEN SUPERVISION
OR INSTRUCTION CONCERNING USE OF THE APPLIANCE
IN A SAFE WAY AND UNDERSTAND THE HAZARDS
INVOLVED. CHILDREN SHALL NOT PLAY WITH THE
APPLIANCE. CLEANING AND USER MAINTENANCE SHALL
NOT BE MADE BY CHILDREN WITHOUT SUPERVISION.
7
392477
BEFORE CONNECTING THE WASHING MACHINE
Carefully read the instructions for use before connecting
the washing machine. Repair or any warranty claim
resulting from incorrect connection or use of the washing
machine shall not be covered by the warranty.
The appliance is to be connected to the water mains using
new hose-sets and that old hosesets should not be reused.
To avoid hazard, damaged power cord may only be
replaced by the manufacturer, authorized service
technician, or other authorized person.
8
WASHING MACHINE
(WASHING MACHINE DESCRIPTION)
2
1
3
4
1
2
3
4
4
4
4
392477
FRONT
1 Front panel
2 Dispenser
3 Door
4 Filter
BACK
1 Water inlet pipe
2 Power cord
3 Water discharge pipe
4 Adjustable feet
9
TECHNICAL INFORMATION
(DEPENDING ON THE MODEL)
Maximum load See rating plate See rating plate (SLIM)
Width
600 mm 600 mm
Height
850 mm 850 mm
Depth
600 mm 440 mm
Depth with door open
108 cm 92 cm
Washing machine weight
x kg
(depending on the model)
x kg
(depending on the model)
Rated Voltage
See rating plate See rating plate
Nominal power
See rating plate See rating plate
Connection
See rating plate See rating plate
Water pressure
See rating plate See rating plate
Current
See rating plate See rating plate
Frequency
See rating plate See rating plate
TYPE: PS10/XXX
Art.No.: XXXXXX
AC 220-240V 50/60 Hz 10A Pmax.: 2400W
2000W XXX/min 0,05-0,8 MPa
MODEL: XXXXXX
Ser.No.: XXXXXX
X
kg
IPX4
392477
The rating plate with the basic information on the washing machine
is located under the washing machine door.
Rating plate
10
FRONT PANEL
392477
1
Washing machine ON/
OFF and program
SELECTOR DIAL
2
a , b, c WASHING
STYLE keys
(SensoCare)
2a ECOcare
2b ALLERGYcare
2c TIMEcare
3
WASHING
TEMPERATURE key
3a SIGNAL LIGHTS for
indicating the WASHING
TEMPERATURE/ for COLD
WASH
1
32
2a
3a
2b
2c
11
392477
4
SPINNING RPM / PUMP
/ STOP PUMP key
4a SIGNAL LIGHTS for
displaying the SPINNING
RPM/PUMP OPERATION/
PUMP STOP
5
START DELAY key
5a START DELAY display, or
time remaining until the end
of the washing cycle
5b CHILD LOCK signal light
6
a , b, c ADDITIONAL
FUNCTION keys
6a Prewash
6b Extra water
6c SterilTub
7
START/PAUSE key
Use this key to start or
stop the program.
When the machine is turned
on, the signal light on the
key starts to flash; when the
program is started, it is lit
continuously.
6c
7
6
4 5
6b
6a
4a
5a
5b
12
INSTALLATION AND CONNECTION
REMOVAL OF TRANSPORT BRACKETS
392477
Be careful to prevent personal injury.
In removing the wrapping be careful not to damage the
appliance with a sharp object.
Remove transport protection devices; as running the washing
machine with the blocking rods in place could result in
damage. Save transport brackets for eventual later use.
Warranty shall be void in cases of such damage.
1
Move the pipes.
Loosen screws
at the rear of the
machine.
2
Remove the
brackets.
3
Slide brackets
into the groove
on the blocking
rod - the right one
should be turned
around.
4
Use the
brackets to
rotate blocking rods
for 90° and pull
them out.
Close the openings with attached
plastic pegs.
13
INSTALLATION
SELECTING THE ROOM
392477
The appliance should be placed on a surface with concrete
base; the surface should be dry and clean in order to
prevent slipping. The adjustable feet should also be
cleaned before installation.
Vibrations, moving of the appliance and loud operation
due to incorrect setting of the adjustable feet shall not be
covered by this warranty.
1
Put the appliance
in horizontal
position by turning
the adjustable
legs. The legs are
adjustable up to +/-
1 cm.
2
After the
adjustment
tighten the nuts
firmly - towards
the bottom of the
machine!
Use a water scale and spanner No. 32 (for feet) and 17 (for the nut).
14
4X
392477
If you have a tumble dryer of the same dimensions, you can place
it on top of the washing machine by using the vacuum feet or side
by side.
Before connecting the appliance, let it warm up to room
temperature (wait at least two hours).
15
WATER INLET CONNECTION
392477
Insert the gasket with a filter net into the
straight inlet hose attachment nut and
screw the nut onto the water tap (with
some models, the gasket with filter net is
already fitted and any additional fitting into
the nut on the straight attachment is not
required).
To ensure correct operation of the appliance, water pressure
inlet must be between 0,05 and 0,8 MPa. Minimum water
pressure can be established by measuring the quantity of poured
out water. 3 litres of water must be poured out from completely
opened tap in 15 seconds.
If your model has connections for both hot and cold water, then
connect one hose to the cold water supply (blue wing nut or blue
mark on the hose) and the other one to the hot water supply (red
wing nut or red mark on the hose), as indicated on the back wall
of the appliance (letters C and H) (C - cold; H – hot).
Hot water (a mixture of hot and cold water) is added only on the
programs of 60° or more.
The inlet hose should be tightened manually, firmly enough to
prevent any leaks. After tightening the hose, check for any leaks.
Use of pliers, wrenches, or other similar tools is not allowed when
installing the hose, as these tools can damage the nut thread.
A
B
C
A
AQUASTOP
B
TOTAL AQUA-
STOP
C
REGULAR
ATTACHMENT
16
AQUA-STOP (CERTAIN MODELS ONLY)
(CERTAIN MODELS ONLY)
TOTAL AQUA - STOP
392477
In case of damage on the interior pipe, leaking is prevented by automatic closing system
which stops water inlet to the machine. In such cases display (A) turns red. Inlet pipe must
be replaced.
Do not immerse the Aqua-stop system inlet pipe into the
water, because it contains the electric valve!
In case of damage on the interior pipe, leaking is prevented by automatic closing system
which stops water inlet to the machine. Protection system will also detect whether there
is any water leakage in the washing machine interior. In such cases, washing is suspended,
water supply is cut off, and machine switches on the pump and signals an error.
A
17
WATER OUTLET CONNECTION
392477
Fix the drain hose to run into the sink or the bathtub, or connect
it directly to the wall drain outlet (diameter min. 4 cm). The end
of outlet hose should be placed between minimum 60 cm and
maximum 100 cm above the floor level. It can be attached in three
ways (A, B, C).
A
Outlet hose
can be led into
a wash basin or a
bathtub. Use a string
to attach the hose
to the opening in
the elbow support
to prevent it from
slipping to the floor.
B
Drain hose
can also be
attached directly to
the basin drain.
C
Drain hose
can also be
connected to a wall
drain with a trap
that is properly
installed to allow
cleaning.
A
B
C
max 100 cm
max 60 cm
max 90 cm
max 100 cm
max 150 cm
A
B
C
max 100 cm
max 60 cm
max 30-40 cm
max 160 cm
max 90 cm
18
CONNECT THE APPLIANCE TO THE MAINS
SUPPLY
2 h
392477
After it is installed for the first time, the washing machine should
be left to stand still for two hours before it is connected to the
power mains.
Use the power cord to connect the washing machine to the power
mains through a power outlet. The washing machine may not be
connected to the power mains through an extension cable (danger
of overheating and fire). Nominal voltage and other information is
given on the rating plate located under the door frame.
To prevent from damage by excess voltage on the mains due
to lightning strike we recommend to use a class I over-voltage
protector between the machine and the mains.
The wall socket must be accessible at all times and must be
equipped with an earth lead (in accordance with the local
safety regulations).
The permanent connection must be fitted by an authorized
personnel only.
Never plug the appliance into the electric shaver socket or
hair dryer socket.
19
MOVING AND TRANSPORT
SUBSEQUENT TRANSPORT
392477
After transport, the washing machine should be left to stand
still for at least two hours before it is connected to the power
mains.
We recommend that installation and connection should be
done by a qualified person.
Before connecting the appliance, read the instructions for
use. Repair or any warranty claim resulting from incorrect
connection or use of the appliance shall not be covered by the
warranty.
Before transporting the washing machine, insert at lease one
blocking rod (transport protection) in order to avoid damage to
the washing machine.
20
BEFORE THE USE
392477
12
Clean the washing
machine drum
before using the
appliance for the
first time. Use a
damp cloth and a
mild cleaning agent,
or run the self-
cleaning program.
Open the door of the unplugged washing machine by pulling the
lever towards you.
21
WASHING STEPS (1 - 7)
392477
1. STEP: CHECK THE TAGS ON YOUR LAUNDRY
Normal wash
Delicate wash
Max.
washing
95°C
95
95
Max.
washing
60°C
60
60
Max.
washing
40°C
40
40
Max.
washing
30°C
30
30
Manual
washing
Washing
not
allowed
Whitening Whitening in cold water
c1
Whitening not allowed
Dry cleaning Dry cleaning in
all solvents
A
Perchloret-
yhlene R11, R113,
Petrolej
P
Dry cleaning in
kerosene, in pure
alcohol and in
R 113
F
Dry cleaning
not allowed
Ironing Hot iron max.
200°C
Hot iron max.
150°C
Hot iron max.
110°C
Ironing not
allowed
Drying Place on flat
surface
Hang wet
Hang
High temp.
Low temp.
Tumble drying
not allowed
22
2. STEP: PREPARING THE WASHING PROCESS
392477
1. Sort the laundry by type of fabric, colour, soiling, and allowed washing temperature
(see Program table).
2. Close the buttons and zippers, tie any ribbons, and turn the pockets inside-out;
remove any metal clips that could damage the laundry and washing machine interior,
or clog the drain.
3. Place very delicate laundry and small items in a special protective sack.
(The special-purpose textile bag is available separately.)
23
SWITCHING ON THE WASHING MACHINE
LOADING THE WASHING MACHINE
12
392477
Connect the washing machine to the power mains using the power
cord, and connect it to water supply.
To light up the drum (certain models only), rotate the program
selector dial to any position.
Open the door of the washing machine by pulling the lever towards
you.
Load the laundry into the drum (check that the drum is empty).
Close the door of the washing machine.
123
24
3. STEP: CHOOSING A PROGRAMME
1
1
392477
During operation, the dial will not rotate automatically.
Washing programs are entire programs that include all washing
stages, including conditioning and spinning.
To select a program, rotate the program selector dial to the left or
to the right (according to the type or how soiled the laundry is).
See Program Table.
25
PROGRAM TABLE
392477
Program: Max. load Type of laundry Possible combinations
Cotton
– 95 °C
9 kg/ 8 kg/
7 kg/
6 kg
7 kg"/ 6,5 kg"/
6 kg"/
5 kg"
Non-sensitive cotton and linen
laundry (towels, underwear,
T-shirts, terry towelling and
underwear, stockinette,
tablecloths, kitchen cloths etc.).
• spinning
• pump stop
• normal
• eco care**
• time care
• prewash*
• anti-allergic*
• extra water
(*except for at 20°C, )
(**except for at )
Mix/Synthetics
; 30 °C – 60 °C
3,5 kg / 3,5 kg/
3,5 kg/
3 kg
3 kg"/ 3 kg"/
3 kg"/
2,5 kg"
Coloured laundry (of like colours)
made of durable mixed fabrics
(trousers, T-shirts, dresses etc.)
and other clothing made of
polyester, polyamide, or mixes of
these fibres with cotton (shirts,
blouses, etc.).
• spinning
• pump stop
• normal
• eco care**
• time care
• prewash**
• anti-allergic*
• extra water
(*except for at 30°C,
)
(**except for at )
Hand Wash /
Delicate
; 30 °C – 40 °C
2,5 kg/ 2,5 kg/
2,5 kg/
2,5 kg
1,5 kg"/ 1,5 kg"/
1,5 kg"/
1,5 kg"
Delicate laundry made of linen,
silk, wool, or viscose silk, labelled
for hand wash only (dresses, skirts,
blouses etc.) and curtains. Very
gentle program that preserves the
fabric of your clothes.
• spinning
• pump stop
• normal
• time care
• extra water
• prewash*
(*except for at
)
Wool
; 30 °C – 40 °C
2 kg/ 2 kg/
2 kg/
2 kg
1 kg"/ 1 kg"/
1 kg"/
1 kg"
Woollen garments and woollen
mixtures (sweaters, scarves, head
scarves etc.), labelled for machine
washing.
• spinning
• pump stop
• normal
• time care
• extra water
Quick Wash 17´
30°C
2 kg/ 2 kg/
2 kg/
2 kg
1,5 kg"/ 1,5 kg"/
1,5 kg"/
1,5 kg"
Slightly soiled laundry, laundry
refreshment etc. – to save time
and energy.
• spinning
• pump stop
• normal
• prewash
Sportswear
30 °C - 40 °C
2,5 kg/ 2,5 kg/
2,5 kg/
2,5 kg
2 kg"/ 2 kg"/
2 kg"/
2 kg"
Slightly soiled sportswear made
of cotton, microfibers, synthetic
fibres, at low spinning rate and
with a short final spin.
• spinning
• pump stop
• normal
• extra water
• prewash
Night Wash
; 30 °C – 60 °C
3,5 kg/ 3,5 kg/
3,5 kg/
3,5 kg
3 kg"/ 3 kg"/
3 kg"/
2,5 kg"
Mixed coloured laundry made
of fabrics of different durability,
with gentle tumbling, longer wash
times, and lower spinning rate.
• spinning
• pump stop
• normal
• extra water
• prewash*
(*except for at
)
Bio Wash
40 °C - 60 °C
9 kg/ 8 kg/
7 kg/
6 kg
7 kg"/ 6,5 kg"/
6 kg"/
5 kg "
Washing the laundry with very
little to no detergent and by using
eco wash balls.
• spinning
• pump stop
• normal
"Data for SLIM
Cold wash
26
392477
To improve your washing results we recommend 2/3 load on
Cotton programs.
Program: Max. load Type of laundry Possible combinations
Perfect Black
30 °C
2,5 kg/ 2,5 kg/
2,5 kg/
2,5 kg
2 kg"/ 2 kg"/
2 kg"/
2 kg "
Dark laundry using special-
purpose detergents for black
laundry, with gentle tumbling and
lower spinning rates
• spinning
• pump stop
• normal
Ultra White
30 °C
2,5 kg/ 2,5 kg/
2,5 kg/
2,5 kg
2 kg"/ 2 kg"/
2 kg"/
2 kg "
Delicate, slightly soiled laundry
like bras, lace underwear, using
special-purpose detergents
for white delicate laundry... for
washing at low temperatures
with gentle tumbling and lower
spinning rate.
• spinning
• pump stop
• normal
Partial programs these are independent programs. Use them when you feel you do not need the
entire washing program. Before selecting a new program, the washing machine
has to be switched to "OFF" position for 1 second). Decrease spinning speed by
pressing the (4) key.
Rinse
rinsing of the laundry (including hand washed laundry) without spinning
between the rinsing cycles, with one final spinning cycle.
"Extra water" can be selected by pressing the (6b) key.
Softening
for softening, starching, or impregnating previously washed laundry. It can also
be used as a short rinse, but without adding any conditioner.
It is completed with an additional rinse.
"Extra water" can be selected by pressing the (6b) key.
Spinning/
Pumping
for spinning the laundry.
If you wish to pump out the water from the machine, without spinning, then
press the (4) key several times to decrease the setting to
(Pumping).
"Data for SLIM
Favourite Wash 1
To store a program, that you have customized. First, select the program
(rotate the program selector dial to the desired position) and adjust the
settings as desired.
To save, press and hold the (6a) and (7) keys. The display will read P1
and an acoustic signal will be emitted.
The program will remain stored until you change it with the same
procedure.
Favourite Wash 2
To store a program, that you have customized. First, select the program
(rotate the program selector dial to the desired position) and adjust the
settings as desired.
To save, press and hold the (6b) and (7) keys. The display will read P2
and an acoustic signal will be emitted.
The program will remain stored until you change it with the same
procedure.
27
4. STEP: CHOOSING THE SETTINGS
392477
Each program features basic settings which, however, can be changed.
To change a setting, press the relevant key (before pressing the START/PAUSE key).
Some settings cannot be selected with some programs; an acoustic signal and a flashing
light will remind you of such cases (see Program Table).
Washing style
NORMALcare
(basic settings)
ECOcare
(energy-saving wash – longer washing time, less water).
ALLERGYcare
(for laundry belonging to people who are particularly sensitive to
detergents – using more water, with additional rinse)
TIMEcare
(time-saving wash – shorter washing time, more water).
Half load is recommended for the Cotton program.
Light on the key for selected washing mode is lit.
Washing temperature
Changing the temperature on the selected program
Each program has a preset temperature which can be changed by
pressing the (3) key.
( Means cold wash)
Light next to the selected temperature is lit.
2
3
6c
3
2
4 5
6b
6a
28
392477
Spinning
To change the spinning rate by steps, from the rpm rate that was
preset on the selected program down to “ ” (pumping the water,
without spinning). The last setting is “ ” (pump stop) – the laundry
remains soaked in water from the last rinse.
Use this option if you wish to prevent creasing of the laundry when
you know you do not have the time to take it from the washing
machine immediately after the washing program is completed.
Light next to the selected spinning rpm is lit.
Start delay
Use this function to start the washing cycle after a certain amount
of time has elapsed. Press the (5) key to display 0:00 on the
display unit (5a).
By pressing the (5) key, you can adjust the time in 30-minute steps
up to 2 hours, and by 1-hour steps up to 24 hours.
If nothing is pressed for 5 seconds, actual washing time will be
displayed.
To reset the program end time, press the (5) key again.
The function is activated when the START/PAUSE key is pressed.
Time is counted down by minutes. When the countdown reaches
zero, the selected washing program will start automatically.
To interrupt or change the program delay time press the
START/PAUSE key. Press the (5) key to select a new delay
time and confirm it by pressing the START/PAUSE key.
to quickly cancel the setting of delay time, press the (5) key
and hold it for 3 seconds; then, press the START/PAUSE key
to resume the washing program.
In case of a power supply failure before the delay time has
elapsed, press the START/PAUSE key to resume the delay
time countdown.
4
5
29
5. STEP: SELECTING ADDITIONAL FUNCTIONS
392477
Prewash
Washing heavily soiled laundry, particularly with stubborn
superficial stains.
ExtraWater
Washing with an extra amount of water and an additional rinse
with some programs.
SterilTub
Removing impurities, bacteria, and any unpleasant odour from the
washing machine interior.
This setting can only be selected on the Cotton 95°C program
(Normal care); press the (6c) key. "cln" will appear on the display.
No other function can be selected simultaneously.
Empty the washing machine drum and add some powder
detergent. There should be no laundry in the washing machine
during this program.
We recommend running the self-cleaning program at least once a
month.
Child Lock
A safety feature. To activate the child, press the (6b) and (6c) keys
simultaneously and hold them for at least three seconds.
The selection will be confirmed by an acoustic signal and by a
signal light (the key will be lit). Follow the same procedure to
deactivate the child lock. As long as the child lock is activated,
program, settings, or additional functions cannot be changed. The
washing machine can only be switched off by rotating the program
selector dial (1) to the "0" position.
Child lock remains active even after the washing machine is
switched off. To select a new program, the child lock must first be
deactivated.
6a
6b
6c
6b 6c
+
6a
6b
6c
To activate/deactivate a function,
press the relevant key (before
pressing the START/PAUSE key).
Some functions cannot be selected with
some programs; an acoustic signal and a
flashing light will remind you of such cases
(see Program Table).
30
392477
After disconnecting the appliance from the power mains, all
settings will be reset to their default factory values, except for
the acoustic signal loudness and child lock setting.
ACOUSTIC SIGNAL
Select the acoustic signal loudness by simultaneously pressing the
(6c) key and rotating the program selector dial (1) clockwise to the
initial position.
Each time a key is pressed, the final loudness level is changed
(three levels; press the 6a key to increase the setting and 6c to
decrease it.). Confirm the selection by pressing the (6b) key.
Selected loudness (sound volume) level is indicated on the display
unit. The most recent setting is stored.
OPTIMIZING PROGRAM DURATION
Using advanced technology, the appliance perceives the amount of
laundry in the early stage of the wash.
After detecting the amount of the load, the appliance automatically
adjusts the program duration.
STANDBY MODE
If no program is selected and started and no other action is taken
within five minutes after turning on the machine, the display will be
automatically turned off to save energy. Signal light on the START/
PAUSE key will flash. Signal lamps of additional functions (6a, 6b, 6c)
flash intermittently.
The display will turn on again when you rotate the program selector
dial or press any button. If no action is taken after the end of the
program, the display will also be turned off after five minutes. Signal
light on the START/PAUSE key will flash. Signal lamps of additional
functions (6a, 6b, 6c) flash intermittently.
P o = weighted power in ‘off mode’ [W] 0,07
P I = weighted power in the ‘left on mode’ [W] 1,00
T I = time in ‘left on mode’ [min] 10,0
Low water temperature, low mains voltage and different
washing load may affect the washing time; the remaining time
displayed is adjusted accordingly during the washing process.
31
392477
6. STEP: PROGRAM START
Press the (7) key START/PAUSE.
Time remaining to the end of the program or start delay time (if set) will appear on the
display.
Signal lights on the selected functions will be lit.
After pressing the START/PAUSE key, you may adjust the spinning speed and activate or
deactivate the child lock; other settings, however, cannot be changed.
7. STEP: END OF WASHING PROGRAM
End of washing program will be signalled by an acoustic signal; "End" will appear on
display.
1. Open the washing machine door.
2. Take the laundry from the drum.
3. Close the door!
4. Shut off the water supply tap.
5. Switch off the appliance (rotate the program selector dial (1) to the "OFF" position).
6. Unplug the power cord from the outlet.
32
CLEANING THE DETERGENT DISPENSER
CLEANING AND MAINTENANCE
392477
If necessary, clean the detergent dispenser.
Pull it out from its casing completely by pressing the flap.
1
Wash it under
running water
using a brush, and
dry it. Remove
any leftover dried
detergent from
the bottom of the
casing.
2
If required,
remove and
clean the plug cap.
3
Clean the plug
cap under
running water and
replace it.
Disconnect the washing machine from the mains before
cleaning!
Do not allow children to clean the appliance or perform any
maintenance tasks without proper supervision!
33
CLEANING THE DISPENSER HOUSING, INLET
HOSE SCREEN AND DOOR RUBBER GASKET
392477
1
Clean the water
inlet hose screen
frequently under
running water.
2
Clean the entire
rinsing area
of the washing
machine with a
brush, especially the
nozzles on the upper
side of the rinsing
chamber.
3
After each
wash wipe the
door rubber gasket.
This will prolong its
useful life.
34
CLEANING THE FILTER
392477
During cleaning, some water may leak. Therefore, we recommend
spreading an absorbent cloth on the floor before starting.
Insert the filter back as shown on the picture, and tighten by
turning it in clockwise direction. To ensure good sealing the
gasket surface must be dirt free.
Filter needs occasional cleaning, especially following heavily
shaggy or old laundry.
1
Open the filter
lid using flat
screwdriver or similar
tool.
2
Remove the water
outlet funnel
before cleaning the
filter.
3
Gradually rotate
the filter in the
counter-clockwise
direction.
Pull out the filter (and
let the water slowly
drain).
4
Clean the filter
under running
water.
35
CLEANING THE WASHING MACHINE
392477
The casing should be cleaned with soft cloth and mild detergent.
Disconnect the washing machine from the mains before
cleaning!
36
INERRUPTING AND CHANCHING
THE PROGRAM
392477
Manual (physical) termination
The program can be cancelled / terminated
by rotating the program selector dial (1) to
the position. “0FF” position.
If there is water in the machine, select the
additional program (spin (+ ) key (4)).
Personal settings
You can change the original settings of
each program. Once you select a washing
program and additional functions, you may
save (store) such combination by pressing
the START/PAUSE key and keep it pressed
for 8 seconds. S C will appear on the
display.
The program will remain stored until it is
changed (using the same procedure).
PAUSE KEY
The program can always be stopped by
pressing the START/PAUSE. If there is no
water in the drum, the door can be opened
after a while; otherwise, the door cannot be
opened. To resume the program, press the
START/PAUSE key.
FAULTS
In case of a fault, the program will be
interrupted. Flashing signal lights and
an acoustic signal will warn about such
occurrence (see section Troubleshooting),
and the fault will be indicated on the display
(E).
Power failure
At electric cutout the program is
interrupted. When the power supply is re-
established, press the START/PAUSE key
to resume the washing program. Delay time
will not be reset.
Washing time will resume from the point at
which it was interrupted.
37
392477
If a power failure occurs when the drum is still full of water, be
careful not to open the door before you pump the water out.
(see Programs/partial programs: Spinning/pumping).
Opening the door in case of a power
outage
In models with an electromagnetic door
lock, the door can only be opened by
simultaneously pulling the special lever
(located at the filter) and the door handle.
Opening the door (Temporary
interruption/ Permanent suspension -
change of program)
Washing machine door may only be opened
if the water level is sufficiently low. If it is
not, the water must first be pumped out
of the machine. Use the additional water
pumping or spinning program).
38
WHAT TO DO ...?
392477
The washing machine shall automatically control the operation of
particular functions during the washing cycle. If any irregularity is
identified, this will be indicated by reporting (Ex) on the display.
The machine will signal the fault until it is turned off. If the fault
is on the heating system, the machine will complete the washing
program, but without heating the water.
Various interferences from the environment (e.g. electric devices)
may also cause the machine to signal faults.
In such case:
turn off the appliance and wait a few seconds,
turn on the appliance and repeat the washing program.
If the fault reoccurs, call the service center (Call centre).
The warranty does not cover faults caused by interference
from the environment (lightning strike, electric circuit, natural
disasters, etc.).
39
TROUBLESHOOTING TABLE
392477
Failure Possible cause What to do...?
The machine does not
work – the display is not
lit.
• Machine is not powered. Check if:
• power in the socket,
• the fuse is OK,
• plug is in the socket.
Water is leaking from the
machine.
• Filter is not tightly screwed
in.
• Inlet pipe is not tightly
screwed to the machine or
to the water faucet.
• Outlet pipe fell to the floor.
• Tighten the filter properly.
• Tighten the inlet pipe.
• Affix the outlet pipe to the drain.
The machine moves
during operation.
• The machine is not properly
levelled.
• Transport brackets are not
removed.
• Level the machine with the
adjustable legs.
• Remove transport brackets.
The machine vibrates
during the spin.
• Unevenly distributed
laundry, especially with very
small quantities (for ex. only
the bathrobe).
• This is normal, the machine will
reduce the RPM if vibrations are
too strong. Wash larger quantity
of laundry.
Excessive foaming during
washing.
• Excessive measure of
detergent.
• Use washing powder according
to the instructions by the
producer and according to
the water hardness and soiled
laundry. Use only detergents for
machine washing.
Laundry is not properly
spun. No failure is
reported.
• The machine switched on
the UKS* function. Because
of bad laundry balance, the
machine has automatically
reduced spin RPM.
• The machine operates normally.
Wash large and small pieces of
laundry together.
Greasy wads appear on
the laundry.
• Too little detergent (laundry
was very greasy).
• Wash the laundry again. Add
more detergent for such soiled
laundry, or use liquid detergent.
Laundry is stained after
washing.
• You used liquid detergent
or detergent for coloured
laundry which does not
contain whitener.
• Unsuitable program has
been selected.
• Use the detergent containing
whitener.
• Use special stain removers.
White powdery residues
on the laundry.
• It is not the consequence of
bad rinsing, but because of
neo-phosphate detergents
containing non soluble
components (zeolites)
for water softening.
Such substances may be
deposited upon the laundry.
• Immediately rinse the laundry
once again.
• Use liquid detergents which do
not contain zeolites.
• Try removing the residues with
the brush
Detergent residues in the
dispenser.
• Low water flow pressure.
Some detergents may stick
to the dispenser rather hard
if it is wet.
• Clean the inlet pipe filter net.
• Wipe the dispenser prior loading
detergent.
Softener is not
completely rinsed,
or water is left in the
dispenser dish.
• Sucking cover is not
correctly positioned or is
clogged.
• Clean the dispenser and firmly
fix the cover to its place.
Unpleasant smell in the
washing machine drum.
• Remains of fabrics, washing
agent and softener in the
filter.
• Development of germs.
• Check whether the filter is clean.
• Run the auto-clean (SterilTub)
program (see chapter: selecting
additional functions).
40
392477
Failure Possible cause What to do...?
Washing time is longer
than usual. Time
indicated on the display
is corrected during the
washing cycle.
• Low temperature of inlet
water.
• The machine switched on
the UKS* system because of
uneven laundry load.
• Low mains voltage.
• There has been a failure in
the power supply.
• Washing program time may be
up to 60% longer; however, this
does not imply a fault in the
machine.
• Washing time is extended by the
power supply down-time
• Additional rinses may prolong
the washing program time.
E2
Washing program does
not start
• At the start of the
washing cycle: washing
time will flash
• Open door or door not
properly closed.
• Close the door by pushing it
towards the machine.
• Push START again.
E3
Water is not supplied to
the machine.
• Water level has not been
reached.
• Disturbed water inlet.
Check if:
• the water tap is open,
• inlet pipe net filter is clean.
• Push the START button.
E6
Program temperature not
reached.
• Heater failure.
• Inlet water too cold.
• Manual addition of water.
• Turn off the appliance and wait
for a few seconds.
• Turn the appliance back on and
repeat the washing program.
• If the failure is reported again,
call a service technician.
E7
Water is poorly pumped
out or not at all.
• Water outlet is clogged. Check if:
• the filter is clean,
• outlet pipe is not jammed,
• the drain is clogged,
• outlet pipe is positioned higher
than 1m.
• Push START again.
Unevenly distributed laundry or lumps of laundry in the washing machine drum can cause
problems such as vibration and noisy operation. The appliance will sense such problems
and activate the UKS.*
Smaller loads (e.g. one towel, one sweater, one bathrobe etc.) or clothes made of
materials with special geometrical properties are virtually impossible to distribute evenly
across the washing machine drum (slippers, large items etc.). This results in several
attempts to redistribute the laundry, which in turn leads to longer program duration. In
extreme cases of unfavourable conditions, the program can be completed without the
spinning cycle.
UKS allows stable operation and extends the useful life of the appliance.
In case you were not successful in repairing the malfunctions in
spite of the above suggestion chart, call the nearest authorized
service shop. Repairing the failure arising from inappropriate
connections or use of the appliance is not covered by the
guarantee, and the repair expenses are paid by the customer.
41
RECOMMENDATIONS FOR
WASHING AND ECONOMIC USE
YOUR WASHING MACHINE
392477
Wash new coloured garments separately
the first time.
Wash heavily soiled laundry in smaller
amounts, with more detergent or a prewash
cycle.
Treat stubborn stains with a special stain
removal agent before the wash. We
recommend using the "Grandma's advice
for natural stain removal".
With slightly soiled laundry, we recommend
a program without prewash, use of shorter
programs (e.g. Time Care) and a lower
washing temperature.
Frequent, or predominant, washing at low
temperatures, using liquid detergents, may
result in development of bacteria which
causes odour in the washing machine. To
prevent this, we recommend running the
auto-clean (SterilTub) program occasionally
(see section WASHING/ selecting additional
functions).
We recommend avoiding washing very
small amounts of laundry as this will lead
to excessive use of energy and poorer
performance.
Loosen the stacked laundry prior inserting it
into the drum.
Use only detergents for machine wash.
Add the powder or liquid detergents as
instructed by the manufacturer, according
to the washing temperature and selected
washing program.
If water hardness level exceeds 14°dH
degrees, the use of water conditioner is
required. Any damage to the heater due to
failure to use a water conditioning agent
shall not be covered by this warranty.
Check the information on water hardness
with your local water supply company or
authority.
Chlorine-based whitening agents are not
recommended, as it can damage the heater.
Do not add hardened balls of detergent into
the detergent dispenser as this may clog
the piping in the washing machine.
If you use thick liquid softener it is
recommended to dilute it with water, to
prevent clogging of dispenser compartment
ducts.
Liquid detergents are intended for main
wash only, without pre-wash.
High spin RPM leave less moisture in
laundry which dries out much quicker in the
tumble dryer, thereby saving energy.
42
392477
Hardness scale Degree of hardness
°dH (°N) m mol/l °fH(°F) p.p.m.
1 - soft < 8,4 < 1,5 < 15 < 150
2 - medium 8,4 - 14 1,5 - 2,5 15 - 25 150 - 250
3 - hard > 14 > 2,5 > 25 > 250
In case of hard water add detergent according to the Chart for degree 1 and add
appropriate quantity of water softener (see manufacturer’s instructions).
Washing machine is
equipped with the
dispenser left gate,
so you may pour
liquid detergent
also into the central
compartment
(depending on
model). If you use
powder detergent
the gate is lifted up,
and in case of liquid
detergent it is slid
down.
If you select the pre-
wash ,
then only add
powder detergent
to the washing
compartment
of the detergent
dispenser.
Pre-wash
Wash
Softening
43
392477
Before using special-purpose stain removers, try using the natural
methods that do not harm the environment on less stubborn
stains.
However, prompt action is required! Soak the stain with an
absorbent sponge or a paper towel; then, rinse with cold
(lukewarm) water - but never with hot water!
GRANDMA'S ADVICE FOR NATURAL STAIN
REMOVAL
Stain Stain removal
Colour lacquers use paint thinner; rinse with soapsuds (test on a hidden spot first)
Blueberries linen – soak in buttermilk; rinse with cold water first, then with
warm water
wool – first, apply lemon juice, then rinse
silk – wipe with spirit (denatured alcohol)
Tea rinse with cold water (stain removal soap, if required)
Chocolate rinse with lukewarm soapsuds; apply lemon juice and rinse;
Ink apply warm lemon juice; rinse
apply milk, wait until it dries; rinse
Felt tip pens use a mixture of vinegar and spirit/denatured alcohol (1:1); rinse
apply warm lemon juice; rinse
Mustard rinse with lukewarm water or soak with soda, rinse
Strawberries soak in a mixture of vinegar and water
Eggs sprinkle with salt and wait until it dries
Cocoa white fabrics – soak in salt water
Curry, turmeric use a solution of glycerine; rinse
Tar apply regular or peanut butter; then wash
Coffee rinse with salt water or soak in salt water
(Ball Point) Pen spray with hair lacquer; dry, rinse with a mixture of vinegar and
water,
moisten with vodka and soak
Carrots apply hard soap, soak in water, rinse
Shoe polish apply cooking oil; rinse
Blood rinse with cold water
Dried blood soak the stain with water, soak in salt water, wash with soapsuds
Adhesive tape iron; place a paper towel between the ironing board and the fabric
44
392477
Stain Stain removal
Glue soak in spirit/denatured alcohol (or a mixture of vinegar and
water); rinse
Make-up use a glass cleaner and a paper towel
Butter rinse with hot soapsuds (if the fabric permits);
Fat tablecloth – sprinkle with baking soda, brush after a while
wool – remove with mineral water
use a mixture of baking soda + water (or toothpaste); dry; scrape
off
fresh stain - sprinkle with potato starch, then brush
milk – rinse first with cold and then with hot water
Burnt parts moisten the burnt parts (e.g. from ironing) with vinegar, lemon
juice, or onion juice; rinse
Tomatoes line the stain with slices of raw potato; rinse with warm soapsuds
Mould soak in hot buttermilk; rinse with cold water
Sweat soak in citric acid (12g/l of water); solution of borax; or in
undiluted vinegar; wash
delicate, wool – wipe with diluted vinegar
silk – boil potatoes in unsalted water, cool, add some alcohol, and
use the solution to wash the silk
Red beet rinse with cold water (or apply borax), soak; wash
Red wine sprinkle with salt, rub with lemon juice; rinse
Lipstick rinse with lukewarm mixture of water and shampoo
Rust coat with a mixture of lemon juice and salt; sundry (test on a
hidden part first)
soak in juice of cooked rhubarb stalk
Fruit rinse with water, wipe the remaining part with vinegar or lemon
juice; wash
Fruit juice cover with salt and water; leave for 15 minutes to take effect; wash
Soot do not rub, blow off, sprinkle with flour; alternatively, sprinkle with
salt and beat out; or soak up with white bread
Resin place the garment in a bag and freeze it; scrape the frozen stain;
put butter or fat on wool and wash
Machine grease/lubricant wipe with butter; wash
Spinach rub with raw potatoes; wash
Stamps rub with lemon and salt; rinse
Grass apply diluted lemon juice; wash; if the stain is on jeans, apply
toothpaste, dry, wash
Wax place the garment in a bag and freeze; scrape the wax; place a
paper towel on the rest and iron; wash
Chewing gum place the garment in a bah and freeze; remove the gum
45
DISPOSAL
392477
Our appliances are packed in environmentally friendly materials
which may be recycled, deposited or decomposed without any
threat to the environment.
To this end all wrappings are marked accordingly.
The symbol on the product or on its packaging indicates that this
product may not be treated as household waste. Instead it shall be
handed over to the applicable collection point for the recycling of
electrical and electronic equipment.
When disposing of an obsolete appliance, make sure you remove
the power cord and destroy the door switch and latch to prevent
the door from closing (children safety).
By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and
human health, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed information
about recycling of this product, please contact your local city
office, your household waste disposal service or the shop where
you purchased the product.
We reserve the rights to make any changes or mistakes in these operation instructions.
46
392477
TYPICAL CONSUMPTION TABLE
Due to variations in the type and quantity of laundry, spin
speed, variations in power voltage, and the temperature and
moisture of ambient, the measured values of the duration of
the program and power consumption with the end user may
vary somewhat from the displayed values.
Program
Max. load
[kg]
Temp.
[°C]
Spinning
[rpm]
Remaining
moisture content
[%]
Duration
[min.]
Water-
Consumption [L]
Power-
consumption
[kWh]
Cotton
(A-40%) ECO*
9 / 4,5** 60 1000-1600 59-44 181 / 168** 57 0,95 / 0,82**
(A-40%) ECO*
9 / 4,5** 40 1000-1600 59-44 160 / 150** 57 0,77 / 0,66**
(A-40%) ECO*
8 / 4** 60 800-1600 62-44 181 / 166** 54 0,80 / 0,72**
(A-40%) ECO*
8 / 4** 40 800-1600 62-44 160 / 150** 54 0,77 / 0,65**
(A-40%) ECO*
7 / 3,5** 60 800-1600 62-44 181 / 161** 49 0,77 / 0,62**
(A-40%) ECO*
7 / 3,5** 40 800-1600 62-44 160 / 150** 49 0,65 / 0,55**
(A-30%) ECO*
8 / 4** 60 800-1600 62-44 181 / 166** 55 0,92 / 0,88**
(A-30%) ECO*
8 / 4** 40 800-1600 62-44 160 / 150** 55 0,75 / 0,72**
(A-30%) ECO*
7 / 3,5** 60 800-1600 62-44 181 / 161** 51 0,84 / 0,73**
(A-30%) ECO*
7 / 3,5** 40 800-1600 62-44 160 / 150** 51 0,67 / 0,58**
(A-30%) ECO*
6 / 3** 60 800-1600 62-44 181 / 160** 49 0,70 / 0,67**
(A-30%) ECO*
6 / 3** 40 800-1600 62-44 160 / 150** 49 0,66 / 0,54**
(A-20%) ECO*
7 / 3,5** 60 800-1600 62-44 181 / 161** 52 0,95 / 0,80**
(A-20%) ECO*
7 / 3,5** 40 800-1600 62-44 160 / 150** 52 0,67 / 0,58**
(A-20%) ECO*
6 / 3** 60 800-1600 62-44 181 / 160** 50 0,85 / 0,72**
(A-20%) ECO*
6 / 3** 40 800-1600 62-44 160 / 150** 50 0,66 / 0,54**
* Testing program by EN 60456 with the selection of max. spin RPM
** Half load
‘Standard 60°C ECO cotton programme’
and the ‘standard 40°C ECO cotton programme’
are the standard washing programmes to which the information in the label relates. These
programmes are suitable for cleaning normally soiled cotton laundry and they are the most
efficient programmes in terms of combined energy and water consumption. For this reason,
actual water temperature may differ from the nominal cycle temperature.
47
392477
Program
Max. load
[kg]
Temp.
[°C]
Spinning
[rpm]
Remaining
moisture content
[%]
Duration
[min.]
Water-
Consumption [L]
Power-
consumption
[kWh]
Cotton
SLIM
(A-30%) ECO*
7 / 3,5** 60 800-1400 62-53 181 / 160** 49 0,79 / 0,64**
(A-30%) ECO*
7 / 3,5** 40 800-1400 62-53 160 / 148** 49 0,55 / 0,48**
(A-30%) (I)¯ ECO*
7 / 3,5** 60 800-1400 62-53 181 / 160** 49 0,76 / 0,62**
(A-30%) (I)¯ ECO*
7 / 3,5** 40 800-1400 62-53 160 / 148** 49 0,52 / 0,46**
(A-30%) ECO*
6,5 / 3,25** 60 800-1400 62-53 181 / 160** 49 0,79 / 0,64**
(A-30%) ECO*
6,5 / 3,25** 40 800-1400 62-53 160 / 148** 49 0,55 / 0,48**
(A-30%) (I)¯ ECO*
6,5 / 3,25** 60 800-1400 62-53 181 / 160** 49 0,76 / 0,62**
(A-30%) (I)¯ ECO*
6,5 / 3,25** 40 800-1400 62-53 160 / 148** 49 0,52 / 0,46**
(A-30%) ECO*
6 / 3** 60 800-1400 62-53 181 / 160** 49 0,79 / 0,64**
(A-30%) ECO*
6 / 3** 40 800-1400 62-53 160 / 148** 49 0,55 / 0,48**
(A-30%) (I)¯ ECO*
6 / 3** 60 800-1400 62-53 181 / 160** 49 0,76 / 0,62**
(A-30%) (I)¯ ECO*
6 / 3** 40 800-1400 62-53 160 / 148** 49 0,52 / 0,46**
(A-30%) ECO*
5 / 2,5** 60 800-1400 62-53 181 / 160** 47 0,69 / 0,64**
(A-30%) ECO*
5 / 2,5** 40 800-1400 62-53 160 / 148** 49 0,50 / 048**
(A-20%) ECO*
6,5 / 3,25** 60 800-1400 62-53 181 / 160** 50 0,89 / 0,71**
(A-20%) ECO*
6,5 / 3,25** 40 800-1400 62-53 160 / 148** 50 0,60 / 0,52**
(A-20%) ECO*
6 / 3** 60 800-1400 62-53 181 / 160** 50 0,89 / 0,71**
(A-20%) ECO*
6 / 3** 40 800-1400 62-53 160 / 148** 50 0,60 / 0,52**
(A-20%) ECO*
5 / 2,5** 60 800-1400 62-53 181 / 160** 47 0,78 / 0,71**
(A-20%) ECO*
5 / 2,5** 40 800-1400 62-53 160 / 148** 51 0,52 / 0,52**
*
Testing program by EN 60456 with the selection of max. spin RPM
**
Half load
¯
BPM motor (inverter motor)
‘Standard 60°C ECO cotton programme’
and the ‘standard 40°C ECO cotton programme’
are the standard washing programmes to which the information in the label relates. These
programmes are suitable for cleaning normally soiled cotton laundry and they are the most
efficient programmes in terms of combined energy and water consumption. For this reason,
actual water temperature may differ from the nominal cycle temperature.
PS10 CLASS OEM en (08-15)
28

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gorenje W7543TB bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gorenje W7543TB in de taal/talen: Engels als bijlage per email.

De handleiding is 6,3 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Gorenje W7543TB

Gorenje W7543TB Gebruiksaanwijzing - Deutsch - 48 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info