cool down before you try to remove
the bread. Do not use a knife or a
sharp tool, as these may cause
damage to the heating elements.
The warming rack is only intended for
warming up rolls or croissants. Do not
put any other ingredients on the
warming rack, as this may lead to a
hazardous situation.
This appliance is marked according to the
European directive 2012/19/EU on Waste
Electrical and Electronic Equipment
(WEEE).
This guideline is the frame of a European-
wide validity of return and recycling on
Waste Electrical and Electronic Equipment.
Before first use
Remove any stickers and wipe the body of the
toaster with a damp cloth.
Before you use the appliance for the first time,
we advise you to let the appliance complete a
few toasting cycles without slices of bread on
the highest browning setting in a properly
ventilated room. This burns off any dust that
may have accumulated on the heating
elements and prevents unpleasant smells
during toasting.
Using the appliance
1. Put the appliance on a stable and flat
surface, away from curtains and other
combustible materials. Put the plug in the
wall socket.
2. To adjust the length of the cord, wind part
of it round the brackets in the base of the
appliance.
Toasting bread
Never let the toaster operate unattended.
1. Put one or two slices of bread in the
toaster.
2. Select the desired browning setting. Select
a low setting for lightly toasted bread and a
high setting for darkly toasted bread.
3. Push down the toasting lever to switch on
the appliance. The toasting lever only stays
down when the appliance is connected to
the mains. The STOP button lights up. The
metal parts of the toaster become hot
during toasting. Do not touch them.
4. When the toast is ready, it pops up and the
toaster switches off. The toaster switches
off automatically. You can stop the toasting
process and pop up the bread at any time
by pressing the STOP button. To remove
smaller items, move the toasting lever
upwards a little further. If bread gets stuck
inside the toaster, remove the plug from the
wall socket and let the appliance cool down
completely. Then carefully remove the
bread from the toaster. Do not use a knife
or another sharp metal tool to do this and
do not touch the metal internal parts of the
toaster.
Toasting frozen bread
Note: Toasting frozen bread takes longer than
toasting defrosted bread.
1. Put one or two slices of frozen bread in the
toaster.
2. To toast the frozen bread:
3. Push down the toasting lever and then
press the defrost button. The STOP button
lights up.
4. When the toast is ready, it pops up and the
toaster switches off.
Reheating toasted bread
1. Put one or two slices of already toasted
bread in the toaster.
2. To reheat the toasted bread: Push down
the toasting lever and then press the reheat
button. The STOP button lights up.
3. When the toast is ready, it pops up and the
toaster switches off.
Checking the level of brownness
The toaster allows you to lift the carriage
control lever to check the colour of the bread at
any time without cancelling the toasting
process. Do not touch the bread during
checking. Release the carriage control lever
and the bread will return to the slots to continue
the toasting process. If you are satisfied with
the level of brownness, press the cancel button
to stop further toasting.
Cleaning
1. Unplug the appliance.
2. Let the appliance cool down.
3. Clean the appliance with a damp cloth.
Never use scouring pads, abrasive
cleaning agents or aggressive liquids such
as petrol or acetone to clean the appliance.
Never immerse the appliance in water.
4. To remove crumbs from the appliance,
slide the crumb tray out of the appliance
