• Keep hands and utensils away from the cutting
blade while chopping food, to reduce the risk of
severe injury to persons or damage to the food
chopper. A spatula may be used, but must be used
only when the food processor is not running.
• Never feed food by hand. Always use food pusher.
• Do not leave the appliance unsupervised when it is
operating i.e. when it is “ON”.
Continuous Slicer / Shredder
CAUTION: Make sure that the unit is unplugged from
power source and operating button is on” “OFF” before
inserting or removing attachments.
• If using the blades (discs) instead of chopper, the
procedure of preparing the appliance is the same
as for chopper accessory. Just instead of chopping
blade you should use your chosen disc. The
selection of the disc depends on your wishes
regarding food preparation.
Check the picture B for better understanding.
• WARNING: Use extreme caution – blades are
sharp. Handle carefully.
BLENDER AND COFFEE GRINDER
CAUTION : Make sure that the unit is unplugged
from power source and operation button is on “OFF”
before inserting or removing any attachments and
before cleaning.
• IMPORTANT: Your blender and coffee grinder use
the same cutting blade. When you select the
accessory (blender or grinder), you need to select
the grinder cup or bowl for blender as well. After
this you must screw it on the cutting blade. Do not
forget about adding O-ring seal (picture A, 12).
• Place the assembled blender on the motor unit
correctly. The signs on the motor unit and on the
blender must be in the same way. Then you must
turn selected accessory clockwise and you will
hear a "click". When finished the working, you must
turn the chosen accessory anti-clockwise. You
must put the ingredients into the bowl of the
blender after the blender is placed on the motor
unit properly.
Check the photo D at the beginning of the manuals.
• The procedure is absolutely the same if you want
to use coffee grinder instead of blender.
IMPORTANT: If using grinder, you must firstly put
the ingredients into the grinder cup. After this you
must screw the cutting blade on the cup. Do not
forget about adding O-ring seal.
• Before turn on the blender, you must place the
blender lid correctly. If you are adding some
ingredients into the bowl of the blender, add them
through the small lid of blender.
• IMPORTANT: Blender/grinder does not work if it is
not placed correctly on the motor unit. During the
working, the bowl must be empty. No attachments
into the bowl.
JUICER
CAUTION: Make sure unit is unplugged from power
source and operating button is on “OFF”.
• Firstly you must asseble the juicer as it is shown on
the photo C at the beginning of the manuals.
• Then place the juicer bowl on the motor unit
properly. The signs on the motor unit and on the
juicer must be in the same way. Then you must
turn selected accessory clockwise and you will
hear a "click".
• IMPORTANT: Juicer does not work if it is not
placed correctly on the motor unit. Be sure to turn
switch to “OFF” position after each use. Make sure
the motor stops completely and unplug unit before
disassembling.
• During use, turn “OFF the appliance temporarily to
clean the pulp that remains in the filter, with the
help of the spatula.
• Keep hands and utensils away from the feeding
tube while preparing juice, to reduce the risk of
severe injury to persons or damage. Always use
food pusher.
RECOMMENDATIONS
IMPORTANT: After suggested working time, your
appliance at the same time needs some idle time. This
will prolong the lifetime of your appliance.
Check the table on next page.
Thesuggested times below depend on the hardness
and quality of the food or ingredients as well.
