• Remote control operation panel
1. Pull out the battery panel at the back side of remote control.
2. Pay attention to the battery polarity, and insert the battery(CR2032) to the tray of the panel.
3. Push the battery panel into the remote control.
4. The batteries contain materials, which are hazardous to the environment; they must be
removed from the appliance before it is scrapped and that they are disposed of safely.
• The function of buttons
As long as the heater is in working condition, the fan is in working state. If the heater stops working,
then fan will stop working after 10s.
working, then fan will stop working after 10s.
1. After connecting to power supply and switching on the power, you will hear a "BiBi" sound,
the heater enters to Standby Mode. The power indicator Led_ lights up.
2. Under standby model, press key to turn on/off the heater,the display panel will
countdown the heater (from 10 to 0 second) after turning off the machine.
3. The default setting after turn on shows as below:
a. heater：low power, Led_ lights up.
b. swing：off, Led_ lights off.
c. timer：0h, Led_ lights off.
d. fan：turned on.
e. temperature setting：the default temperature setting is 25℃.
f. fireplace display：turned on, Led_ lights up.
g. ECO: turned off, Led_ lights off.
4. In working condition, press to shift the power between low level and high level.
a. Low power: Led_ lights up.
b. High power: Led_ lights up.
5. In working condition, press key to enter into the ECO mode, Led_ lights up, press it
again to quit this mode.
