TROUBLESHOOTING
If the product does not operate or does not operate properly, first check according
to the following list. If the reason the product does not operate or does not operate
properly is not included in the following list, the product mayhave failed. At this
time, it is recommended to send the product to
the dealer for treatment.
CLEANING AND MAINTENANCE INSTRUCTION
1. Light accumulated dust may be removed from the heater with a soft cloth. Wipe the
exterior surfaces of the heater occasionally with a cloth moistened (not dripping wet)
with a solution of mild detergent and water. Dry the case thoroughly with a soft dry
cloth before operating the heater.
2. The fan motor is lubricated by the factory, and will require no further lubrication.
3. No other user maintenance is required or recommended. If service is required, send
your heater to the nearest authorized servicedepot.
4. Store heater in a clean and dry place when not in use.
REMEMBER - Portable electric heaters are designed for spot heating, or as a
supplementary heat source. They are not intended to be main sources of heat during
the normal heating season.
Note: There may be trace of smoke or odour when unit is first operated. Do not be on
the heating coil during the manufacturing process. It will quickly evaporate, and should
not reoccur.
Table 2
