It is important that you read through and follow the
instructions and directions below. Conduct installation and
connection in accordance with the separate installation
instructions.
Safety instructions
• Connections to electricity, water and drainage must be
performed by a qualified professional.
• Always follow applicable regulations for water, drainage
and electricity.
• Take care during installation! Wear protective gloves!
There must always be two people!
• Place a watertight protective tray on the floor beneath
the dishwasher to prevent damage from any water leaks.
• Before screwing the dishwasher into place, test the
dishwasher by running the Rinse programme. Check
that the dishwasher fills with water and drains. Check
also that none of the connections leak.
Setup
• The recess and connection dimensions are included in
the separate installation instructions. Check that all
dimensions are correct before starting the installation.
Note that the height of the cover door can be adjusted
to match other fittings.
• Make sure the area on which the dishwasher is to be
installed is firm. Adjust the adjustable feet so that the
dishwasher is level.
Drainage connection
See the separate installation instructions for necessary
information.
The drainage hose may be extended by a maximum of 3 m
(the total length of the drainage hose must not exceed 4.5
m). Any joins and connecting pipes must have an internal
diameter of at least 14 mm. However, the drainage hose
should ideally be replaced with a new hose without joins.
No part of the drainage hose may be more than 950 mm
above the bottom of the dishwasher. The hose must not be
routed directly to a floor drain or the like. In such cases, the
hose can act as a siphon and empty the dishwasher.
The hose must always discharge at least 350 mm above
the bottom of the machine.
Ensure that the drainage hose has no kinks.
15
