728739
4
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
EN
OPERATING
INSTRUCTIONS
DISHWASHER
www.gorenje.com
Contents
2
Front panel ................................................................................................
3
Safety instructions .....................................................................................
4
Before washing for the first time ...............................................................
6
Loading the dishwasher ............................................................................
8
Using the dishwasher ................................................................................
13
Settings .....................................................................................................
16
Care and cleaning .....................................................................................
19
Troubleshooting ........................................................................................
26
Installation .................................................................................................
28
Service ......................................................................................................
29
Information for test institute .......................................................................
32
Technical information ................................................................................
Front panel
3
21 4 75 6
9
8
10 12
11
13
14
15
1 Main power switch
2 Auto wash
3 Intensive wash
4 Eco wash
5 Quick wash
6 Rinse
7 SpeedWash
8 Auto open
9 Extra hygiene
10 Delayed start
11 Display
12 Rinse aid indicator
13 Salt indicator
14 ION
15 Self-cleaning programme
2
Safety instructions
General
Read the operating instructions and
keep them in a safe place!
Never use the dishwasher for any
purpose other than that specified in
these operating instructions.
Do not load the dishwasher door or
dishwasher baskets with anything other
than dishes.
Never leave the dishwasher door open
as someone may trip on it.
Use only dishwasher detergent!
This machine can be used by children
aged 8 and upwards, and by people
with reduced physical capacity, mental
ability, memory loss or lacking
experience and knowledge. These
individuals must be supervised when
using the machine or have instructions
on how to use the machine and
understand the risks that can occur.
Cleaning of the machine must not be
carried out by children without
supervision.
Children must be watched to ensure
they do not play with the dishwasher.
Damaged mains cables must only be
replaced by a qualified electrician.
Only use the dishwasher in
household-type environments for
dishwashing household dishes. All
other use is prohibited.
Never place dishes with solvent
residues in the dishwasher due to the
risk of explosion. Nor may dishes that
contain ash, wax or lubricants be
washed in the dishwasher.
WARNING!
Knives and other pointed items must be
placed horizontally in the dishwasher's
special cutlery baskets.
Installation
See the section Installation.
Child safety
Always start the dishwasher
immediately after adding detergent.
Keep children away from the
dishwasher when the door is open.
Some detergent may remain inside!
Do not allow children to use or play with
the dishwasher. Be especially vigilant
when the door is open.
WARNING!
Children must be supervised
dishwasher detergent is corrosive!
Winter storage/transport
Store the dishwasher where the
temperature remains above freezing.
Avoid long transport distances in very
cold weather.
Before transporting a used dishwasher
all water must be pumped from the
machine. Run the Rinse programme.
Transport the dishwasher upright or
laying on its back.
Overflow guard function
The overflow protection starts pumping
out the machine and turns off the water
supply if the water level in the dishwasher
exceeds the normal level. If the overflow
protection is triggered, turn off the water
supply and call the service department.
Packing material
The packaging protects the product during
transport. The packaging material is
recyclable. Separate the different
packaging materials to help reduce raw
material use and waste. Your dealer can
3
take the packaging for recycling or direct
you to the nearest recycling centre. The
packaging is comprised of:
Corrugated cardboard made from up
to 100% recycled material.
Expanded polystyrene (EPS) with no
added chlorine or fluorine.
Supports made from untreated wood.
Protective plastic made from
polyethylene (PE).
Disposal
When the dishwasher has reached the
end of its service life and is to be
disposed of, it should immediately be
made unusable. Pull out the power
cable and cut it as short as possible.
The dishwasher is manufactured and
labelled for recycling.
Contact your local authority for
information about where and how your
dishwasher should be correctly
recycled.
Before washing for the first time
The water softener
In order to achieve good dishwashing
results, the dishwasher needs soft water
(water with low mineral content). Hard
water leaves a white coating on dishes
and the dishwasher.
Water hardness is specified using the
following scales: The German water
hardness scale (°dH) and the French
water hardness scale (°fH). A water supply
with a water hardness in excess of 6°dH
(9°fH) must be softened. This is done
automatically with the aid of the built-in
water softener. In order for the softener
to function optimally, it must be adjusted
to the hardness of the water supply.
Contact the local waterworks to check the
water hardness in your area.
Adjusting the water softener
Chapter Settings on page 14 describes
how to adjust the water softener.
Fill up the salt
Before you begin using a dishwasher with
a water softener, you must fill the salt
compartment with salt for the water supply
to be softened automatically. Use large
grain salt or special dishwasher salt.
WARNING!
In order to avoid rust stains a
dishwashing programme must be started
immediately after adding salt.
Never pour dishwasher detergent into
the salt compartment. This destroys the
water softener!
Do as follows the first time:
1
Unscrew the lid as illustrated.
4
2
Place the funnel supplied with the
dishwasher in the salt compartment
top-up hole. First, pour in about 1 l of
water.
3
Then add salt, a maximum of 1.5 kg,
until the compartment is full.
4
Wipe up any excess salt so that the lid
can be screwed on firmly.
5
Run a programme to ensure that any
salt in the dishwasher is rinsed away.
Salt compartment lid
Refill salt indicator
When the salt needs topping up, the
above symbol lights on the display.
When the salt runs out, unscrew the cap
and fill the container with salt. Water is
only needed the first time! Wipe clean and
tighten. Run a programme to ensure that
any salt in the dishwasher is rinsed away.
After topping up, it may take a while
before the symbol goes out.
Top up with rinse aid
Drying is faster and a better result is
achieved if you use rinse aid. You will also
achieve a better dishwashing result with
clear and spotless dishes.
1
Open the rinse aid compartment lid.
2
Carefully top up with rinse aid. Only add
rinse aid to the level marked max.
3
Wipe up any splashes of rinse aid
around the compartment.
4
Close the lid firmly.
Press to open
Refill rinse aid indicator
When the rinse aid needs topping up, the
above symbol lights on the display.
After topping up, it may take a while
before the symbol goes out.
Setting the rinse aid dosage
The section Settings describes how to set
the rinse aid dosage. Rinse aid dispensing
can be set from 0 (Off) to 5 (High dose).
(Factory settings: 5)
Decrease the rinse aid dosage:
If the dishes have a sticky white/blue
film.
If the dishes are streaked.
Build-up of foam. If you have very soft
water, the rinse aid can be diluted
50:50 with water.
5
Loading the dishwasher
Energy-efficient dishwashing
Do not start the dishwasher until it is
fully loaded to save energy.
Do not rinse under running water.
Simply scrape off large food particles
before loading the dishwasher.
Choose an environmentally-friendly
detergent. Read the environmental
declaration on the packaging!
If the dishes are only slightly dirty, you
can select a programme with a low
temperature.
Better drying results are achieved if you
use the Auto open option, which
automatically opens the dishwasher
door at the end of the programme. (If
the dishwasher is built-in the
surrounding furnishings must be
resistant to any condensation.)
Fragile dishes
Some cookware is not dishwasher safe.
This can be for several reasons. Some
materials cannot withstand strong heat,
others can be damaged by dishwashing
detergent.
Exercise caution with, for example,
handmade items, fragile decoration,
crystal/glassware, silver, copper, tin,
aluminium, wood and plastic. Look for the
"Dishwasher safe" marking.
The dishwasher's baskets
The dishwasher is equipped with a top
cutlery tray, an upper basket and a lower
basket.
Top cutlery tray
The top cutlery tray has space for cutlery,
ladles, whisks, serving cutlery and similar
items.
Upper basket
Place glasses, cups, bowls, side plates
and saucers in the upper basket. All dirty
surfaces should face inwards and
downwards! Wine glasses are placed on
the wine glass shelf and knives are placed
in the knife stand on the right (if fitted).
6
Raising and lowering the upper basket
1
Pull out the upper basket.
2
Grab the sides of the upper basket with
both hands and lift it up.
3
Repeatedly lift the basket with both
hands to change its position. (The
upper basket can be set in three
positions.) When the upper basket is in
the highest position lifting it will return
it to the lowest position. Note that both
sides of the basket must always be set
to the same height.
Foldable tines
The foldable tines can be folded up or
down to make it easier to load pots, bowls
and glasses. Release the foldable tines
by pressing the catch inwards before
adjusting their position.
Lower basket
Place plates, side plates, serving dishes
and pots in the lower basket.
Foldable tines
Fold down the foldable tines (plate
supports) when dishwashing pots.
Release the foldable tines by pressing the
catch inwards before adjusting their
position.
Points to consider
All dirty surfaces should face inwards
and downwards!
Dishes should not be placed in or on
each other.
Angle dishes with hollows, such as
cups, so that the rinse water will run off.
This is also important for plastic items.
Make sure small items cannot fall
through the dishwasher basket; place
them in the top cutlery tray.
NOTE!
Check that the spray arms can rotate
freely.
7
Using the dishwasher
Add detergent
Press to open
1
Prewash detergent compartment
2
Main wash detergent compartment
Detergent is added according to water
hardness.
Follow the instructions on the detergent
packaging. This dishwasher is fitted with
a water softener, so use detergent and
rinse aid doses suitable for soft water.
Too much detergent can result in less
effective dishwashing and also entails
greater environmental impact.
The detergent compartment must be dry
when adding detergent. There is one
compartment for the prewash and one for
the main wash. If powder or liquid
dishwasher detergent is used, add a small
amount of the detergent to the prewash
compartment. Contact the detergent
manufacturer if you have questions about
the detergent.
NOTE!
Use only dishwasher detergent! Washing
up liquid must not be used as the foam
that forms prevents the dishwasher from
operating effectively.
Dishwasher tablets
Halve the tablet if it is difficult to close the
dispenser lid. There is a risk that the
detergent will not be released properly if
the lid is tight and will not open correctly.
NOTE!
Dishwasher tablets are not
recommended for short programmes
(less than 75 minutes). Use powder or
liquid dishwasher detergent instead.
3-in-1/All-in-one detergent
Chapter Settings describes how to
activate TAB (3-in-1/ All-in-one detergent).
Note that salt must be put in the salt
compartment. If you are not satisfied with
the dishwashing or drying results,
deactivate the setting TAB (3-in-1/
All-in-one detergent) and top up with salt,
detergent and rinse aid. See Chapter
Before washing for the first time.
Read through the directions for these
products carefully. If anything is unclear,
contact the detergent manufacturer.
The main power switch
Press and hold the main power switch
until the display turns on. Also check that
the water tap is on.
PROGRAMS - Choose programme
Choose a programme to suit the type of
dishes and how dirty they are.
Press the desired programme until the
programme symbol is activated.
Auto wash
The dishwasher can measure how dirty
the dishes are and adjust water
consumption and temperature accordingly.
When newly installed, the programme
needs to be run five times before it is fully
adapted and can provide the best results.
8
Auto wash
1)
+ SpeedWash +
Auto open
An effective programme for daily use for
slightly dried leftovers. (This programme
is not intended for burnt food, such as on
oven dishes.)
Intensive wash
Programme for very dirty dishes, such as
pans, casserole dishes and oven dishes.
If these dishes do not completely fill the
dishwasher, you can add plates and the
like.
Eco wash
This programme is intended for cleaning
normally dirty dishes and is the most
effective programme in terms of combined
energy and water consumption.
Quick wash
This programme is used for glasses and
porcelain that is slightly dirty, such as
coffee cups.
In combination with SpeedWash, a shorter
programme is achieved (15 minutes).
Rinse
Used to rinse dishes while you wait for the
dishwasher to become fully loaded.
EXTRA - Selecting Options
To select an option, press one of the
option buttons until the option is activated.
The available options vary between
programmes and some options cannot be
combined (available options glow dimly).
SpeedWash
This option shortens the programme time,
but uses more energy and water.
Auto open
The dishwasher door opens automatically
at the end of the programme, which
improves the drying results. (If the
dishwasher is built-in the surrounding
furnishings must be resistant to any
condensation.)
NOTE!
The dishwasher door must not be
blocked when set to open automatically.
This can disrupt door lock functionality.
Extra hygiene
This option is intended for situations
where demands on hygiene are especially
high, such as when dishwashing baby
bottles and cutting boards. The
temperature is increased in both the main
wash and the final rinse.
Delayed start
When you select Delayed start the
dishwasher will start 1-24 hours after you
close the door.
1
Press the button once to activate
Delayed start. Press the button several
times or hold it in to set the desired
number of hours.
2
Close the door and the dishwasher
counts down 1 hour at a time and starts
after the selected delay.
1)
This combination (Auto wash + SpeedWash + Auto open) is also known as QuickIntensive (90 minutes).
9
If you want to cancel the Delayed start
option, open the door and press and hold
the main power switch until the display
turns off.
Starting the dishwasher
Close the door to start the dishwasher. If
the main power switch is on the
dishwasher will start automatically when
the door is closed.
TIME - Time remaining
Once you have chosen a programme and
options, the time the programme took
when last used is displayed.
Once you have started the dishwasher
the display shows the remaining
programme time. The remaining time is
updated after the water for the final rinse
has been heated.
This may differ somewhat from time to
time depending on the temperature of the
water supply, the amount of dishes, the
ambient temperature and other factors.
Front display
Dishwashing Time remaining Drying
Stopping or changing a programme
If you want to change programme after
starting the dishwasher, open the door
then press and hold the main power
switch until the display turns off. Add more
detergent if the lid of the detergent
dispenser has opened. Then press the
main power switch, choose a new
programme and close the door.
Do you want to add more dishes?
Open the door. The dishwasher stops
automatically. Add the dishes and close
the door. After a while, the dishwasher
continues the programme.
If the dishwasher is turned off due
to a power failure
If the dishwashing programme was not
finished, the interrupted programme
continues when power is restored.
NOTE!
During drying, the programme is
interrupted if the power is cut or the door
is open for more than 2 minutes.
How to get the best drying results
Fully load the dishwasher.
Angle dishes with hollows, such as
cups, so that the rinse water will run off.
This is also important for plastic items.
Top up with rinse aid or increase the
rinse aid dosage level.
Activate the Auto open option.
Allow the dishes to cool before
unloading the dishwasher.
Once the programme has finished
Once the programme has finished, "End"
appears on the display.
At the end of the programme one short
signal will sound. Chapter Settings
describes how to change this function.
The dishwasher switches off automatically
after the programme ends. Shut off the
water tap after each use.
10
Unloading the dishwasher
Hot porcelain is more fragile. Leave the
dishes to cool in the dishwasher before
unloading them.
Unload the lower basket first to avoid any
water drops from the upper basket falling
onto the dishes in the lower basket.
Special programmes
ION Self-cleaning programme (CLn)
Press and hold the appropriate option
buttons to activate a special programme.
The programme starts when the door is
closed.
ION
This programme prevents bad odours
from dirty dishes left in the dishwasher.
Activate the programme until a
dishwashing programme is run. The fan
and ioniser are activated at intervals for
72 hours. (Do not use this programme in
confined spaces with insufficient
ventilation).
The text ION is shown on the display
when the function is active.
TIP!
If you want to deactivate the ION
programme to start a dishwashing
programme, open the door then press
and hold the main power switch until the
display turns off. Restart the dishwasher.
Self-cleaning programme (CLn)
Self-cleaning programme for hygienic
cleaning of the dishwasher tub, spray
arms and spray pipes.
This programme can be run (with no
dishes in the machine) using normal
dishwasher detergent or citric acid.
Special dishwasher cleaners are also
available on the market. For the removal
of limescale deposits, see The dishwasher
tub in the chapter Care and cleaning.
"CLn" is shown on the display.
11
Programme chart
Consumption values
1)
Final rinseNumber of
rinses
Main washPrewashesEXTRA
- Options
Detergent,
compartment
1 / 2
(ml)
PROGRAMS
- Programme
Water cons.
(L)
Energy
(approx.
kWh)
Dishwashing
time
(approx.
hrs:min)
11-200.9-1.52:10-2:5065 °C2-350-65 °C1-3Auto open--- / 25Auto wash
171.72:5570 °C270 °C210 / 25Intensive wash
6.90.743:0049 °C255 °C1Auto open--- / 25
Eco wash
2)
100.20:2025 °C135 °C--- / 10Quick wash
30.010:07--- °C1--- / ---Rinse
1)
Consumption values vary depending on the temperature of the incoming water, room temperature, load size, selected additional functions and more.
2)
This dishwashing programme is the standard cleaning cycle used to compile the energy labelling information. It is intended for washing normally dirty
dishes and is the most effective programme in terms of combined energy and water consumption.
12
Settings
Open the settings menu:
First, open the door. Turn off the machine. Press and hold the main
power switch until the display lights up.
1.
Within 10 seconds:
- press the programme button for Auto wash and the option button for
SpeedWash.
2.
+
The display shows the settings menu (current setting and its currently
set value).
3.
(Exit the menu by browsing through the menu or pressing the main
power switch.)
Navigate the settings menu:
Press to save the set value and continue to the next
setting.
Current setting.
Current setting value.
Press to browse between setting values.
You can now adjust the following settings:
OptionsSettings
Rinse aid dosage setting.1:00 - 1:05Rinse aid1.
Increase the rinse aid dosage:
If the dishes have water marks.
Decrease the rinse aid dosage:
If the dishes have a sticky white/blue
film.
If the dishes are streaked.
Build-up of foam. If you have very
soft water, the rinse aid can be
diluted 50:50 with water.
13
OptionsSettings
Adjusting the water softener. Read off
the appropriate setting from the water
hardness table below.
°dH
0-5
6-8
9-11
12-14
15-19
20-24
25-29
30-39
40-49
50+
0-9
10-14
15-20
21-25
26-34
35-43
44-52
53-70
71-88
89+
°fH
°dH
°fH
2:00 - 2:09Water hardness2.
Do not forget to put salt in the salt
compartment after you have set the
water softener to 2:01 - 2:09.
For a water supply with a hardness
under 6°dH (9°fH), select 2:00. The
water softener is deactivated and no
salt is needed.
You can activate this setting when
using 3-in-1/ All-in-one detergent. The
dishwashing programmes automatically
adapt to provide the best possible
dishwashing and drying results every
time. If this setting is activated there is
no need to add rinse aid since this
option disables rinse aid dispensing. It
also reduces the amount of salt added
to the water softener. Note that salt
must be put in the salt compartment.
3:00 (Off)
3:01 (On)
TAB
(3-in-1/all-in-one
detergent)
3.
NOTE!
In order to achieve good dishwashing
results, it is essential to check which
type of detergent or all-in-one product
best suits your needs! Read the
detergent packaging carefully for
information on proper use. Always
follow the directions for use or
information on the detergent
packaging!
14
OptionsSettings
The dishwasher uses a buzzer to
indicate when a programme is finished
or when a fault has occurred.
4:00 - 4:03Buzzer volume4.
Built-in water tank.5:00 (Off)
5:01 (On)
Water tank5.
Before deactivating the water tank, run
a self-cleaning programme. See
Self-cleaning programme in the chapter
Using the dishwasher.
15
Care and cleaning
Coarse filter
The coarse filter traps larger food
particles, which cannot get past the
drainage pump. Empty the coarse filter as
necessary.
Coarse filter
1
Lift the coarse filter by the handle.
2
Empty the coarse filter. Remember to
replace it!
Fine filter
Debris that collects on the fine filter is
automatically rinsed away during each
wash. Clean the fine filter when
necessary.
Fine filter
1
Turn the handle anticlockwise.
2
Lift the filter straight up using the
handle. Free the coarse filter to clean
the fine filter.
3
Replace in reverse order. Check that
the edges seal properly when replacing
the fine filter.
4
Lock the filter in place by turning the
handle clockwise to the stop position.
The handle should point straight out
from the dishwasher.
NOTE!
The dishwasher must not be used
without the filters in place!
Dishwashing results may be affected if
the coarse filter is incorrectly fitted.
16
Spray arms
Holes and bearings can sometimes
become blocked. Remove any debris
using a pin or the like. The spray arms
also have holes underneath.
To facilitate cleaning you can remove the
spray arms. Remember to fit them firmly
back into place afterwards.
Lower spray arm
Pull the lower spray arm straight up to
release it.
Upper spray arm
1
Pull out the upper basket.
2
Unscrew the spray arm bearings
counterclockwise to remove the spray
arm from the upper basket.
The door and the door seal
Regularly clean the sides of the door and
the door seal. Use a slightly damp cloth
(with a little cleaner if necessary).
The dishwasher tub
The dishwasher tub is made of stainless
steel and is kept clean through normal
use.
Limescale deposits
If you have hard water, limescale deposits
may build up in the dishwasher. If this
happens, run a self-cleaning programme
with two tablespoons of citric acid in the
detergent compartment (with no dishes in
the machine). See Self-cleaning
programme in the chapter Using the
dishwasher.
Front panel
Keep the buttons clean and free from
grease. Wipe them clean with a dry or
slightly damp cloth. Never use cleaners
they can scratch the surface. Use the
main power switch to turn off the
dishwasher before cleaning the buttons
to avoid activating any buttons
unintentionally.
Unblocking the drainage pump
If the dishwasher still contains water after
the programme has finished, something
may be blocking the drainage pump. Such
items are easily removed.
1
Turn off the machine using the main
power switch and unplug it from the
wall socket.
2
Remove the coarse filter and the fine
filter.
3
Scoop out the water from the
dishwasher tub.
17
4
In order to inspect the drainage pump,
remove the coloured stop on the right
in the bottom drain.
5
Turn the pump wheel located behind
the drainage pump stop by hand.
Carefully remove any items.
6
Replace the drainage pump stop along
with the fine and coarse filters.
7
Plug the machine in again.
If the dishwasher still does not start and
a whirring sound is heard, the overflow
protection has been activated.
Shut off the water.
Remove the plug from the wall
socket.
Call the service department.
Drainage pump stop
NOTE!
Do not forget to replace the drainage
pump stop.
Unblocking the inlet hose filter
If the water supply contains small
particles, the outer filter on the inlet hose
may become blocked, which results in
Water inlet fault.
1
Turn off the machine using the main
power switch and unplug it from the
wall socket.
2
Turn off the water tap.
3
Unscrew the inlet hose.
4
Carefully remove the outer filter from
the inlet hose and clean it.
5
Replace the filter and check that the
gasket is correctly positioned.
6
Screw the inlet hose firmly into place.
7
Plug the machine into the wall socket
and turn on the water tap. Allow the
pressure to settle for a while and check
that the connection is watertight.
Outer filter on inlet
hose
Gasket
18
Troubleshooting
ActionType of fault on the
display
Clear the drainage pump. See the section Care and
cleaning. If the problem persists, call the service
department.
OverfillingF10
See “Water remains in the dishwasher” in the table
“Problem” below. If the problem persists, call the service
department.
Water outlet faultF11
Check that the water tap is on. If the problem persists,
call the service department.
Water inlet faultF12
Turn off the water tap and call the service department.Inlet valve leakageF40
Call the service department.Water level faultF52
Turn off the water tap and call the service department.OverfillingF54
Call the service department.Circulation faultF56
Press any button to clear the error message.
ActionPossible causesProblem
Wait a moment then try
again.
You have pressed the
buttons too soon after
opening the door.
The buttons do not react
when pressed.
Clean with a dry or slightly
damp cloth.
The buttons are dirty.
Open the door. The buttons
only react to use when the
door is open.
The door is closed.
19
ActionPossible causesProblem
Check that the baskets are
correctly positioned
horizontally.
The baskets are not
correctly positioned.
Cannot close door.
Check that the dishes are
not blocking the baskets
from sliding properly into
place.
Check the door lock. If it
does not click into place and
lock, open the door. Press
and hold the button for the
Auto open option for 15
seconds. Then wait 30
seconds. Close the door.
Check that the door lock
clicks into place and locks.
The door lock does not click
into place and lock.
20
ActionPossible causesProblem
Check.The door is not properly
closed.
The dishwasher does not
start.
Close the door and wait.
After a while, the
dishwasher continues the
programme.
You have opened the
dishwasher to add more
dishes while a programme
is in progress.
Check the door lock. If it has
not clicked into place and
locked, open the door. Press
and hold the button for the
Auto open option for 15
seconds. Then wait 30
seconds. Close the door.
Check that the door lock
clicks into place and locks.
The door lock has not
clicked into place and
locked.
Check.A fuse/circuit breaker has
been tripped.
Check.The plug is not plugged into
the wall socket.
Check.The water tap is turned off.
Check.Overflow/leaks.
Turn off the water tap. Pull
out the plug and call the
service department.
A whirring sound (the
drainage pump) is heard
from the dishwasher and
does not stop when the
main power switch is turned
off.
Press and hold the main
power switch until the
display turns off if you want
to cancel the Delayed start
option. Restart the
dishwasher.
Check that the Delayed start
option has not been
selected.
21
ActionPossible causesProblem
Remove the arms and clean
them.
The spray arms do not
rotate.
The dishes are not clean.
Check that the dishes are
not blocking the spray arms.
Avoid large packages.Old detergent. Detergent is
a perishable product.
Dose according to water
hardness. Far too much or
far too little detergent results
in poorer dishwashing
results.
Incorrect detergent dosage.
Choose a longer
programme.
Unsuitable dishwashing
programme.
Do not cover porcelain with
large bowls or the like. Avoid
placing very tall glasses in
the corners of the baskets.
Dishes loaded incorrectly.
Place dishes to sit steady.Glasses and cups have
toppled over during the
programme.
Screw the filter firmly into
place. See the section Care
and cleaning.
The filter is not correctly
fitted.
Rinse off these types of
foodstuffs if not starting the
dishwasher immediately.
Why not use the Rinse
programme.
Some foodstuffs, such as
mustard, mayonnaise,
lemon, vinegar, salt and
dressings, can mark
stainless steel if left for too
long.
Spots on stainless steel or
silver.
In order to avoid marks and
tarnishing, separate dishes
made from different metals,
such as silver, stainless
steel and aluminium.
All stainless steel can cause
spots on silver if they come
into contact during
dishwashing. Aluminium can
also cause spots on dishes.
22
ActionPossible causesProblem
Check that the salt
compartment lid is properly
tightened. Otherwise call the
service department.
The water softener is
leaking salt.
Spots or films on the dishes.
See the section Settings.Incorrect water softener
setting.
See the section Settings.Incorrect rinse aid dosage
setting.
Top up with salt. See the
section Before washing for
the first time.
Salt compartment empty.
Inactivate the setting TAB
(3-in-1/ All-in-one detergent)
and top up salt and rinse
aid.
3-in-1/ All-in-one detergent
is used and the setting TAB
(3-in-1/ All-in-one detergent)
is activated.
Wash crystal at a low
temperature and with a
conservative amount of
detergent. Contact the
detergent manufacturer.
Too high temperature and/or
too much detergent can
cause etching on crystal.
Unfortunately, this cannot
be repaired, only prevented.
Reduce the amount. See the
sections Before washing for
the first time and Settings. If
you have very soft water,
you may want to dilute the
rinse aid 50:50 with water.
Rinse aid dosage setting too
high.
The dishes have a sticky
white/blue film.
Use a detergent with a
bleaching agent.
Lipstick and tea can be
difficult to wash off.
Spots left after washing.
The detergent compartment
must be dry when adding
detergent.
The detergent compartment
was damp when adding
detergent.
Detergent residue in the
detergent compartment after
dishwashing.
Check that the dishes are
placed securely. Spin the
spray arms to make sure
they can rotate.
The dishes are not correctly
placed or the spray arms are
not rotating.
Rattling sound when
dishwashing.
23
ActionPossible causesProblem
See the section Using the
dishwasher.
The special programme ION
is activated.
Sound from a fan is heard
even when no dishwashing
programme is running.
No action. The programme
time is stored and next time
the programme is run the
corrected time will be
displayed.
The programme is taking
longer than estimated.
1 minute appears in the
display.
Run a self-cleaning
programme. See
Self-cleaning programme in
the chapter Using the
dishwasher.
The dishwasher tub, spray
arms and spray pipes need
to be cleaned.
"CLn" is shown on the
display.
Clean the coarse and fine
filters.
The filters are blocked.Water remains in the
dishwasher.
Clean the drainage pump.
See the section Care and
cleaning.
Debris in the drainage
pump.
Check that the hose is free
from kinks and sharp bends.
Kink in drainage hose.
Disconnect the drainage
hose where it connects to
the sink unit's water trap.
Check that no debris has
fastened and that the
connection has an inner
diameter of at least 14 mm.
Blocked drainage hose.
24
ActionPossible causesProblem
Clean with washing-up
brush and low foaming
cleaner.
Dirt around the seals and in
corners.
Bad odour in dishwasher.
Run a programme with a
higher temperature about
once a month.
Low temperature
programmes have been
selected for a prolonged
period.
Activate the special
programme ION. See the
chapter Using the
dishwasher.
Dirty dishes have been left
in the dishwasher for some
time.
Deactivate the Water tank
setting. See the chapter
Settings.
The dishwasher has not
been used for a while.
Deactivate the special
programme ION. See the
chapter Using the
dishwasher.
The special programme ION
is activated in a confined
space with insufficient
ventilation.
Bad odour outside the
dishwasher.
Activate the Auto open
option.
The Auto open option is not
activated.
The dishes are not dry
enough.
Fully load the dishwasher.The dishwasher is not fully
loaded.
Top up with rinse add or
increase the rinse aid
dosage. See the sections
Before washing for the first
time and Settings.
Rinse aid needs topping up
or dosage is set too low.
Inactivate the setting TAB
(3-in-1/ All-in-one detergent)
and top up salt and rinse
aid.
3-in-1/ All-in-one detergent
is used and the setting TAB
(3-in-1/ All-in-one detergent)
is activated.
25
Installation
520
575
1194
670
720
125-175
55
573
596
510-640*
817-867
0-40**
249
80 11 6
555
31
107
[mm]
Door length
0-4 spacers can be fitted (packaged inside the dishwasher).
Nominal dimensions. Actual measurements may vary.
*
**
It is important that you read through and
follow the instructions and directions
below. Conduct installation and
connection in accordance with the
separate installation instructions.
Safety instructions
Connections to electricity, water and
drainage must be performed by a
qualified professional.
Always follow applicable regulations for
water, drainage and electricity.
Take care during installation! Wear
protective gloves! There must always
be two people!
Place a drip tray on the floor beneath
the dishwasher to prevent damage from
any water leaks.
Before screwing the dishwasher into
place, test the dishwasher by running
the Rinse programme. Check that the
dishwasher fills with water and drains.
Check also that none of the
connections leak.
WARNING!
Turn off the water supply when installing
the dishwasher!
WARNING!
The plug must be disconnected or power
to the socket turned off while the work
is carried out!
Setup
The recess and connection dimensions
are included in the separate installation
instructions. Check that all dimensions
are correct before starting the
installation. Note that the height of the
cover door can be adjusted to match
other fittings.
26
Make sure the area on which the
dishwasher is to be installed is firm.
Adjust the adjustable feet so that the
dishwasher is level.
Attach the protective film (packed in the
document bag) to the underside of the
worktop. The protective film is to protect
the worktop from moisture.
Check that the machine is installed
such that the door opens freely,
otherwise door lock functionality may
be disrupted.
Drainage connection
See the separate installation instructions
for necessary information.
This dishwasher is suitable for installing
in a raised recess (to attain an ergonomic
working height). This means that the
dishwasher can be placed so that the
drainage hose runs to a lower level than
the bottom of the dishwasher, such as by
routing it directly to a floor drain. The
dishwasher is fitted with an integrated
anti-siphon device to prevent the machine
from being emptied of water during the
wash cycle.
The drainage hose can also be connected
to a connection nipple on the sink unit's
water trap. The connection nipple must
have an internal diameter of at least 14
mm.
The drainage hose may be extended by
a maximum of 3 m (the total length of the
drainage hose must not exceed 4.5 m).
Any joins and connecting pipes must have
an internal diameter of at least 14 mm.
However, the drainage hose should ideally
be replaced with a new hose without joins.
No part of the drainage hose may be more
than 950 mm above the bottom of the
dishwasher.
Ensure that the drainage hose has no
kinks.
Connection to water supply
Use only the inlet hose supplied with the
dishwasher. Do not re-use old or other
spare hoses.
The supply pipe must be fitted with a
water tap (stopcock). The water tap must
be easily accessible, so that the water can
be shut off if the dishwasher has to be
moved.
Once the installation is complete, turn on
the water tap and allow the pressure to
settle for a while. Check that all
connections are watertight.
Connection to cold water supply
Connect the dishwasher to the cold water
supply if the building is heated using oil,
electricity or gas.
Connection to hot water supply
Connect the dishwasher to the hot water
supply (max. 70 °C) if the building is
heated using an energy-efficient means
such as district heating, solar power or
geothermal power. Choosing a hot water
connection cuts dishwashing times and
reduces the dishwasher's energy
consumption.
NOTE!
Do not exceed the permitted water
supply temperature. Certain materials
used in some cookware cannot
withstand strong heat. See Fragile
dishes in the chapter Loading the
dishwasher.
27
Electrical connection
Information about the electrical connection
can be found on the serial number plate.
This specification must match the
electricity supply.
The dishwasher must be connected to an
earthed socket.
The electric wall socket must be placed
outside of the installation area to be easily
accessible after installing the dishwasher.
Do not use an extension cord!
NOTE!
Repairs and maintenance relating to
safety or performance must be carried
out by a qualified professional.
Service
Read the chapter Troubleshooting before
contacting the service department. If you
have encountered a problem that you
cannot resolve, please contact your
nearest dealer, see www.gorenje.com.
When making contact, provide the details
on the serial number plate. Include the
article number (1) and the serial number
(2).
SERIAL NO.
1
2
ART. NO.
28
Information for test institute
Request test institute information via
e-mail
dishwashers@appliance-development.com.
The request should include the details on
the serial number plate. Include the article
number (1) and the serial number (2).
29
Your notes
30
Your notes
31
Technical information
Information on energy labelling
Information sheet, in compliance with Commission Delegated Regulation (EU) No.
1059/2010
Gorenje
GI68260Model designation:
13
1)
Number of standard place settings:
A+++Energy efficiency class:
211 kWh per year
2)
Annual energy consumption(AE
C
)
:
0.74 kWhEnergy consumption of the standard cleaning cycle
(E
t
):
Power consumption
0.45 W
Off-mode (P
o
):
0.45 W
Left-on mode (P
l
):
1932 litres per year
3)
Annual water consumption (AW
C
)
:
A
4)
Drying efficiency class:
Eco wash
5)
, option Auto openStandard programme:
180 minutesProgramme time for the standard cleaning cycle:
InfiniteDuration of the left-on mode (T
l
)
:
42 dB(A) re 1 pWNoise emissions:
Integrated productConstruction:
1)
In accordance with standard, EN 50242.
2)
Based on 280 standard cleaning cycles with a cold water connection and consumption in accordance with energy saving mode. The actual
energy consumption depends on how the machine is used.
3)
Based on 280 standard cleaning cycles. The actual water consumption depends on how the machine is used.
4)
On a scale from G (least efficient) to A (most efficient).
5)
This dishwashing programme is the standard cleaning cycle used to compile the energy labelling information. It is intended for washing
normally dirty dishes and is the most effective programme in terms of combined energy and water consumption.
Technical data
817-867 mmHeight:
596 mmWidth:
575 mmDepth:
35 kg
1)
Weight:
0.03–1.0 MPaWater pressure:
See serial number plateElectrical connection:
See serial number plateRated power:
1)
Weight can vary due to different specifications.
www.gorenje.com
Art. No.: 555368. Rev. 02. We reserve the right to make changes.
32

en (03-18)
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gorenje GI65160X bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gorenje GI65160X in de taal/talen: Engels als bijlage per email.

De handleiding is 3,14 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info