654678
9
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
The Golden Mask Deep Hunter pro is a professional metal detector that
was specfically designed for detecting deeply buried metallic objects.
With recent improvements in electronics the Golden Mask Deep Hunter
pro uses the principle of pulse induction by incorporating advanced
circuitry. This makes the Deep Hunter pro more fine-tuned and
advanced then any analog circuit. The Deep Hunter pro was designed to
maximize pulse induction performance.
The Deep Hunter pro features dynamic auto tune, silent discrimination
mode, crackle control and boost mode to outperform pulse detectors of
this class. It has simplified controls, high sensitivity, reliability and
stability.
GM Metaldetectors Ltd.
Golden Mask Deep Hunter pro Operating Instruction
2
CAUTION!
Do not connect or use the "Golden mask Deep Hunter
pro” metal detector if near to the search coil are
people or animals with heart problems or those that
use electro or other electronic devices for the health
treatment and/or prevention!
Electromagnetic field of that detector may cause fatal
malfunction in electronic devices which determine the
life and health of people and animals!
GM Metaldetectors Ltd.
Golden Mask Deep Hunter pro Operating Instruction
3
1 .Components of the unit
1.1. Electronic control unit with built-in 14.4V battery pack that provides
approximately 10 hours of continuous operation, includes leather carrying
case.
1.2. Search coils which can be used with Golden Mask Deep Hunter pro:
1.2.1. Frame coils, included framework and two belts for handling:
- (125 x 125cm);
- (180 x 180cm) option;
1.2.2. Round coils, included S-stem or telescopic fiber carbon stick:
- (d = 20 cm) option;
- (d = 42 cm) option;
- (d = 58 cm) option.
1.3. Battery pack charger "Golden Mask extra special battery charger".
1.4. Instruction manual
2. Principle of operation high-frequency pulse induction in nomotion
mode with discrimination of metals.
3. Controls and indicators
"VOLLUME on/off" - a potentiometer control of sound power and "on/off"
the power of electronic block. (Turn clockwise to turn on and increase
sound or counter clockwise to decrease sound and turn off the device)
"SENS" - potentiometer controls the sensitivity of the detector. (Turn
clockwise to increase the sensitivity or counterclockwise to decrease the
sensitivity)
GM Metaldetectors Ltd.
Golden Mask Deep Hunter pro Operating Instruction
4
"BOOST" slide switch for increasing the sensitivity of detector :
"OFF" normal depth;
"ON" - about 20% extra depth. (When switching to ON position
adjust ground balance and sensitivity accordingly).
"CRACKLE" - potentiometer for setting the initial click rate sound
indication (in the absence of metal in your search coil appliance). Off.
turns the detector in silent disc mode mode.
"GROUND" - "multiturn" potentiometer to adjust the system to eliminate
the influence of the soil.
"TUNE" - button to quickly eliminate noise during operation. When tuning
the device to the soil content press "TUNE", then adjust "GROUND" and
sensitivity ("SENS"). This should quickly eliminate sound and find the
threshold with the tweaking of the "SENS" and "GROUND" controls.
"SIGNAL" analog measurement system to indicate the level of a signal
during the search and voltage level of battery.
"Fe", "n-Fe" - LED indication of the type of metal:
"green" - for ferromagnetic and
"red" for nonferrous metals.
"Battery!" - LED indication of low battery. The LED light will flash red
when the battery is only at 10% of its full charge capacity. The detector can
continue to be used roughly around 30 minutes after the first indication of a
GM Metaldetectors Ltd.
Golden Mask Deep Hunter pro Operating Instruction
5
low battery but its best recommended to stop working and charge the battery
once the LED first appears.
"Batt.Check"- button for check the voltage level of battery. The needle will
be in red area when the Battery!" - LED light. If the needle is in green area
the battery voltage is OK! You could check battery any time even when the
detector is working.
4.Setting the system to eliminate the effect of soil (Ground balance):
- Search coil must be placed on the ground within an area where there is no
presence of any buried metal objects;
- Turn "VOLLUME on/off" clockwise to turn the detector “ON” and
determine the volume of the sound (to point 5÷7 scale is enough for the job);
- Select the required value of the sensitivity control level (depth-sensing)
with the "SENS" (larger level values provide greater depth of detection);
When the soil is not known set first "SENS" to 5. Then (if it is possible)
"SENS" could be increased to the maximum which allow to be use the
detector without noises during the searching;
- Press and hold "TUNE" and turn "GROUND" in the direction
counterclockwise if there are no loud sound or in the clockwise if there are
loud sound. Stop turning the "GROUND" when the loud sound is fast lower
and return a bit to find threshold” tune which will give the best
performance during the searching;
- Release “TUNE”;
GM Metaldetectors Ltd.
Golden Mask Deep Hunter pro Operating Instruction
6
- With "CRACKLE" set the frequency (click rate) of the sound (in the
absence of metal in your search coil);
Do not turn the detector to “silent disc mode” (position Off. of the
"CRACKLE" potentiometer) during ground balance process!
Once these steps have been done the initial set up is complete and the device
is ready to be used.
5. Search for metal objects with framework
Use belts for caring. The frame should be about 10 cm (4 inches) above the
ground. Begin the search by pressing holding/adjusting ground and releasing
the "TUNE" control. When searching an area systematically (5÷10 m
parallel) the overlap should be about 1/3 of the coil size in order to make sure
your search is accurate and precise. (The speed when searching should be
about 3 feet per second.) The movement is performed slowly, each signal is
indicated by start and end. Signals with a duration of less than half the size of
the frame are usually due to shallow buried metal objects. Signals with
longer duration are usually deeper or larger and require careful examination
by repeatedly approaching from different directions.
6. Search for metal objects with round hand held coils
The handle should be adjusted to the height of the operator. The coil should
be high enough - about 5 cm (2 inches) above the ground - to allow
horizontal movement when searching. Begin the search by pressing and
releasing "TUNE".
If the previous settings were done with the larger framework you must adjust
the new settings to accommodate the smaller coil. (see 4.) Normally in this
GM Metaldetectors Ltd.
Golden Mask Deep Hunter pro Operating Instruction
7
situation the new settings such as the “GROUND” need to be tuned in the
direction counterclockwise to lost strong sound, return a few to find the
threshold of the sound. And then start the search begins with pressing and
releasing "TUNE" as usual.
Movements and monitoring the signals are the same as with the larger frame.
7. Indication of the presence of metal
In the presence of metal there will be an increase in the frequency of sound
depending on the size, depth and location of the object. Once the
determination of metal is present refer to the "SIGNAL" meter. While trying
to center or pinpoint the object listen to the peak in sound frequency and
watch meter. When the number (1÷10 higher number indicates object
location when moving to reach max sound frequency) and frequency are in
unison at the highest peak you have pinpointed the desired object.
Determination of the type of metal is shown by the strength of the single
indicated by briefly flashing LEDs - Fe (ferrous indicated by “green” light)
or n-Fe (nonferrous/ indicated by red” light). After passing over the buried
objects the frequency of the sound reduces. Experience can be defined "zone"
signal and can determine approximately the depth and size of detected object.
8.Using of "BOOST"feature
The "BOOST" adds about 20% extra depth when hunting. This feature has
to be monitored closely whenever used because of the higher sensitivity. For
optimum results when using the boost mode to detect deeper in the ground it
is advised to decrease the "SENS" control (if necessary) to positions of "6",
"5" or "4" to keep the single stable and efficient.
GM Metaldetectors Ltd.
Golden Mask Deep Hunter pro Operating Instruction
8
9. Silent mode
To work in silent mode turn the “CRACKLE” in position “OFF”. The
sensitivity will be lower but the noises will be not appear. In silent mode the
detector will produce two tones high for “non-Ferrous” metals and low for
“Ferrous” metals.
REMARKS
1. Upon initial setup of the system to eliminate the influence of soil multiturn
potentiometer "GROUND" should be placed around the middle position -
fifth turnover of initial (final) position.
2. "GROUND" can be rotated a few in the clockwise direction after the
initial setup, which is greatly reduced soil influence and sensitivity (to small
metal objects only), but the system indication of the type of metal has higher
accuracy.
3. If unit sounds for no reason (sound frequency indication changes
randomly) without any metal in the area of your search coil - press and hold
"TUNE" for about one second then release. It may require new settings.
This is seen with changing soil patterns be sure to adjust accordingly in order
to search at peak performance.
4. In the case of turning the device off/on, it is possible that you will see short
flashing indicator "Battery!” due to the charge (discharge) of high-value
GM Metaldetectors Ltd.
Golden Mask Deep Hunter pro Operating Instruction
9
capacitors. This is normal. But if "Battery!” LED indication remains on
during operation, this means that it is necessary to charge the device.
5. To get maximum sensitivity of the detector press and release the TUNE
from time to time during work.
6. The Golden Mask Deep Hunter pro metal detector is a “no-motion” and
will find metals without moving the search coil. But very slow moving is
required for the “type of metal” system only.
7. Always when the detector will be not in use the “VOLUME
potentiometer must be is on position “Off.”!
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw GoldenMask Deep Hunter pro bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van GoldenMask Deep Hunter pro in de taal/talen: Engels als bijlage per email.

De handleiding is 0,34 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info