GM Electronics Ltd.
Golden Mask Deep Hunter pro2 – Instruction Manual
9. "Silent" mode
In "silent" mode detector can be switched with potentiometer "CRACKLE
On/Off." set to "Off". This mode can be choose at any time of searching
process.
In "silent" mode the crackles are not hear and presents of metal will be indicate
with dual tone - "high" - for non-ferrous metals and "low" - for ferrous
metals.
In this mode the sensitivity is lower, but this mode is particularly suitable for
highly "polluted" sites (where available numerous small, mainly iron, metal
objects that are not subject of searching ).
In "silent" mode achieves a "rejection" of adverse metals and much more
efficient search of objects with larger sizes.
10. Charging the built-in battery
To ensure maximum longevity of the built-in battery it has to use to charge only
the supplied charger Golden Mask extra special battery charger.
Regularly check the charge level of the built-in battery with button "Battery
Check" (inspection is possible only when the detector is switched “On”) and
stop after work when lit red LED "Battery" (located in the lower right corner of
the indicator).
To make a charging built battery:
1. Turn “Off.” the detector, remove the antenna jack of "Coil" and turn charger
jack in connector labeled "Charge" on the front panel of device.
2. Place the detector in an upright position near the contact voltage 90 ÷ 240V
and connect the automatic charger into an outlet.
It flashing LED mounted in the housing charger in red color.
