10
Golden Mask 4
Operating the metal detector in residential
and industrial areas may be hampered by
electromagnetic interference or the
presence of modern iron pollutants. For a
steady operation of the detector, you need
to decrease the power (POWER LEVEL)
and increase the discrimination level (DISC
LEVEL) which, respectively, decreases the
search depth.
Use only quality headphones, preferably
with an in-built potentiometer for audio
adjustment.
After continuous work with the detector and
multiple plugging/ unplugging of the cable
jack into/from the socket of the control box,
it is possible that the connection between
the two deteriorate (when gently touching
the cable jack, the metal detector makes a
sound as if detecting metal). You should
carefully clean the contact surface of the
cable plug with a needle or a fine file. For a
better result, slightly bend inwards all
openings of the cable plug.
Do not switch on the detector when the
outside temperature significantly differs
from the temperature indoors (i.e. in a warm
room). Wait for about 20-30 minutes until
the detector adjusts to the temperature
change before you switch it on.
Do not switch on the detector while the
batteries are being recharged. This can
damage the electronics.
To clean the metaldetector after use,
remove the dust and sand, and wipe with a
damp cloth. Do not use alcohol, petrol,
koresilin and other solvents as they can
damage or remove the symbols on the
control panel. If you operate your
metaldetector on terrains where it is
possible to localize ammunition or other
explosives, take special care while
excavating, because the manufacturer is
not liable for your actions.
