708926
17
Verklein
Vergroot
Pagina terug
1/23
Pagina verder
5. ETTL: Use the Wireless Shooting of Flash Ratio
Auto Flash Shooting with Two Slave Unit
Divide the slave units into A and B groups and balance their shooting
illumination (flash ratio).
Auto control exposure to make the total output of A and B flash
groups up to standard exposure.
Setting the flash groups of
1 slave unit.
Set the flash as slave unit.
Press Function Button 3
< > and choose
<A> or <B>.
Set one slave unit as <A>,
the other as <B>.
Gr
MENU 2
RATIO
Setting < >.
2
Step 2 to Step 4 are set on
the master unit.
Press the Function Button
4 on the master unit so that
< > is displayed.
MENU 2
Setting <RATIO A:B>.
3
Press Function Button 2
< > so that
<RATIO A:B> is displayed.
Setting flash ratio.
4
Press Function Button 3
< >.
Turn the Select Dial to set
the amount of flash ratio
and press<SET> button to
confirm.
Taking the picture.
5
The slave units will flash
according to the flash ratio.
Gr
Auto Flash Shooting with Three Slave Unit
Setting <RATIO A:B C>.
2
Use the same method of
step 1 and step 3 (Page
71) to set the master unit
as <RATIO A:B C>.
Setting the slave group
1 <C>.
Use the same method of
step 1 (Page 71) to set the
slave unit of flash
group<C>.
Setting flash exposure
3 compensation.
Use the same method of
step 1 (Page 71) to set the
slave unit of flash
group<C>.
Press Function Button 2
< >. Turn the Select
Dial to set the amount of
flash exposure
compensation and
press<SET> button to
confirm.
A
B
C
About Slave Group Control
If three slave units are all set to
<A> in terms of slave ID, these
slave units will be controlled as if
they were one camera flash in
slave group A.
When setting < RATIO A:B C >, group A, B and C will fire a
flash synchronously; when setting< RATIO A:B >, group C
will not fire a flash.
If shooting under the situation that group C is toward the
main shooting subject, over exposure might occurred.
In some EOS film cameras that support E-TTL autoflash,
you cannot perform multiple flash wireless shooting with a
flash ratio setting.
ID=A ID=A ID=A
Slave Group A
The flash ratio of 8:1 to 1:1 to 1:8 is equivalent to 3:1 to 1:1
to 1:3 (1/2 step increment).
The details of the flash ratio settings are as follows.
8:1 4:1 2:1 1:1 1:2 1:4 1:8
5.6:1 2.8:1 1.4:1 1:1.4 1:2.8 1:5.6
6. M: Wireless Flash Shooting with Manual Flash
This describes wireless (multiple shooting) using manual flash. You
can shoot with a different flash output setting for each slave unit
(firing group). Set all parameters on the master unit.
Setting the flash mode to
1 <M>.
- 71 - - 72 -
17

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Godox-Speedlite-V860II-Canon

Zoeken resetten

  • ik heb zojuist mijn flitser V860II ontvangen maar zit geen nederlandstalige omschrijving bij hoe je de flitser gebruikt kan u mij helpen Gesteld op 27-11-2020 om 13:03

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Godox Speedlite V860II Canon bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Godox Speedlite V860II Canon in de taal/talen: Engels als bijlage per email.

De handleiding is 16,63 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info