656023
5
Verklein
Vergroot
Pagina terug
1/7
Pagina verder
- 19 - - 20 -
When the LCD panel shows “OF”, it means that there is no flash output and the flash
cannot be fired.
3. M Mode
Press MODE Selection Button (16) to enter M mode. In this mode, you can set the flash
unit onto your camera hot shoe or your trigger hot shoe for firing. During shooting, adjust
the power output and press the camera shutter, then the camera flash will fire a flash under
the camera synchronous signal. In this mode, the light sensor is off.
4. S1 Mode: S1 Slave Triggering Mode
Press Mode Selection Button (16) to enter S1 mode. In this mode, the flash unit can
function as a slave flash for creating multiple lighting effects. It is respectively applicable to
manual flash environment.
In S1 mode, the flash unit will fire synchronously when the master flash fires, the same
effect as that by the use of radio triggers.
5. S2 Mode: S2 Slave Triggering Mode
Press Mode Selection Button (16) to enter S2 mode. In this mode, the flash unit can
function as a slave flash for creating multiple lighting effects. It is respectively applicable to
TTL system.
In S2 mode, the flash unit will ignore a single “preflash” from the master flash and will only
fire in response to the second, actual flash from the master.
6. RPT Mode: Stroboscopic Flash
Press Mode Selection Button (16) to enter RPT mode. With stroboscopic flash, a rapid
series of flashes is fired. It can be used to capture multiple images of a moving subject in a
single photograph.
You can set the firing frequency (number of flashes per sec. expressed as Hz), the number
To avoid overheating and deteriorating the flash head, do not use stroboscopic flash
more than 10 times in succession.
Maximum Stroboscopic Flashes:
1/4
1/8
1/16
1/32
1/64
1/128
30
50
70
80
99
99
2
4
70
80
99
99
2
2
7
80
99
99
2
2
4
16
99
99
2
2
3
8
99
99
2
2
3
6
99
99
1
2
3
5
25
99
Flash Output
Hz
1 2
3
4
5
6
7
1/4
1/8
1/16
1/32
1/64
1/128
1
2
2
5
15
99
1
2
2
4
10
99
1
2
2
4
6
99
1
2
2
3
6
99
1
2
2
3
5
99
1
2
2
3
5
36
1
2
2
3
5
20
Flash Output
Hz
9 10-11
12-13 13-15
15-19 20-998
1/1
1/1-0.3 1/1-0.7
1/2
1/2-0.3 1/2-0.7
1/4
OF
1/2+0.7 1/2+0.3 1/4+0.7 1/4+0.3
Figures displayed when reducing flash output level
←Figures displayed when increasing flash output level
Using the Flash
1. Power Management
Press ON/OFF Power Switch for 2 seconds to power the ring flash on or off. Turn off if it will
not be used for an extended period of time.
2. Power Control
The flash output is adjustable from 1/1 full power to 1/128th power in 1/3rd step increments.
To obtain a correct flash exposure, use a hand-held flash meter to determine the required
flash output.
Turn the select dial to adjust the flash output and the rules are shown in the following table:
of flashes, and the flash output.
For setting procedures, see the following:
Press the Mode Selection Button (16) so that “RPT” is displayed.
Press Set Button (17) to select the item to be set. The item blinks.
Rotate Select Dial (20) to set a desired number.
Calculating the Shutter Speed
During stroboscopic flash, the shutter remains open until the firing stops. Use the following
formula to calculate the shutter speed and set it with the camera.
Number of flashes / Firing frequency = Shutter speed
For example, if the number of flashes is 10 and the firing frequency is 5 Hz, the shutter
speed should be at least 2 sec.
Note:
Stroboscopic flash is most effective with a highly reflective subject against a dark
background.
Using a tripod, a remote switch, and an external power source is recommended.
A flash output of 1/1 or 1/2 cannot be set for stroboscopic flash.
Stroboscopic flash can be used with “buLb”.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Godox AR400 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Godox AR400 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,02 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info