686959
28
Verklein
Vergroot
Pagina terug
1/35
Pagina verder
1
Join the GoPro Movement
twitter.com/GoPro
facebook.com/GoPro youtube.com/GoPro
instagram.com/GoPro
Contents
Meet Your HERO7 White 4
Setting Up Your Camera 6
Getting to Know Your GoPro 10
Recording Video 15
Taking Photos 22
Capturing Time Lapse 27
Exposure Control 29
Controlling Your GoPro With Your Voice 32
Playing Back Your Media 36
Connecting to the GoPro App 40
Transferring Your Media 41
Customising Your GoPro 46
Important Messages 52
Resetting Your Camera 53
Mounting Your GoPro 55
Removing the Door 61
Maintenance 63
Battery Information 64
Troubleshooting 67
Customer Support 68
Trademarks 68
Regulatory Information 68
4 5
Meet Your HERO7 White Meet Your HERO7 White
4
4
Learn how to use the accessories that came with your GoPro.
SeeMounting Your GoPro (page 55).
4
4
7
6
4
5
1
2
2
8
9
10
3
1. Shutter Button
2. Status Light
3. Microphone
4. Door
5. Latch Release Button
6. microSD Card Slot
7. USB-C Port
8. Touch Screen
9. Speaker
10. Mode Button
3
6 7
MICROSD CARDS
You’ll need a microSD card (sold separately) to save your videos and
photos. Use a brand-name card that meets these requirements:
microSD, microSDHC or microSDXC
Class 10 or UHS-I rating
Capacity up to 128 GB
For a list of recommended microSD cards, visit gopro.com/microsdcards.
Heads Up: Make sure your hands are clean and dry before handling
your SD card. Check the manufacturer’s guidelines to see your card’s
acceptable temperature range and other important information.
PRO TIP: Keep your SD card in good condition by reformatting it
regularly. This will erase all of your media, so make sure you save it rst.
1. Swipe down to access the Dashboard.
2. Tap Preferences > Reset > Format SD Card.
To learn how to save your videos and photos, see Transferring Your Media
(page 41).
Setting Up Your Camera Setting Up Your Camera
INSTALLING YOUR MICROSD CARD
1. Hold down the Latch Release button on the side door, then slide
thedoor open.
2. With your camera switched o, insert the SD card into the card slot
with the label facing the USB port.
You can eject the card by pressing it into the slot with your ngernail.
8 9
CHARGING THE BATTERY
Your HERO7 White has a built-in battery. Make sure it’s fully charged
before heading out for your adventure.
1. Hold down the Latch Release button on the side door, then slide
thedoor open.
2. Connect your camera to a computer or other USB charger using
theUSB-C cable included.
It takes about two hours for the battery to fully charge. The camera
status lights will turn o when it’s done. See Battery Information
(page 64).
PRO TIP: For the fastest charging, use the GoPro Supercharger
(soldseparately).
Setting Up Your Camera Setting Up Your Camera
UPDATING YOUR CAMERA’S SOFTWARE
To get the latest features and best performance from your GoPro,
makesure it’s using the most up-to-date software.
Updating With the GoPro App
1. Download the app from the Apple App Store or Google Play.
2. Follow the apps on-screen instructions to connect your camera
toyour mobile device. If new camera software is available, the app
willtell you how to install it.
Updating With the Quik Desktop App
1. Download the app from gopro.com/apps.
2. Connect your camera to your computer using the USB-C cable
included. If new camera software is available, the app will tell you
howto install it.
Updating Manually
1. Visit gopro.com/update.
2. Choose HERO7 White from the list of cameras.
3. Select Update your camera manually and follow the instructions.
PRO TIP: Want to know what software version you’re using?
Here’swhere you can nd out.
1. Swipe down to access the Dashboard.
2. Tap Preferences > About > Camera Info.
10 11
POWERING ON
Press the Mode button to turn on your HERO7 White.
POWERING OFF
Press and hold the Mode button to turn it o.
3s
WARNING: Use caution when using your GoPro and related
mounts and accessories. Always be aware of your surroundings
to avoid injuring yourself and others.
Ensure you follow all local laws, including all privacy laws,
which may restrict recording in certain areas.
CAPTURE MODES
Your GoPro has three main capture modes: Video, Photo and Time
LapseVideo.
VIDEO
Change modes by swiping left or right to the one you want.
PRO TIP: Although your GoPro is waterproof, the touch screen won’t work
under water. With the camera on, you can press the Mode button
toswitch modes.
Getting to Know Your GoPro Getting to Know Your GoPro
12 13
Getting to Know Your GoPro Getting to Know Your GoPro
CAMERA ORIENTATION
Your GoPro can easily switch between landscape and portrait shots.
Italso captures videos and photos the right way up, even if it’s mounted
upside down. The touch screen menu will automatically adjust and your
media will play back the right way up.
The orientation is locked in when you press the Shutter button
.
Ifyourcamera tilts during recording, like on a roller coaster, your
footagewill tilt with it. You’ll capture every twist and turn.
Landscape Lock
This locks your camera into landscape orientation. Your on-screen camera
menu won’t change if you rotate your camera to portrait orientation.
1. Swipe down to access the Dashboard.
2. Tap Preferences > Touch Screen > Landscape Lock.
Heads Up: Videos and photos shot in portrait orientation with Landscape
Lock on will play back sideways.
PRO TIP: Use Landscape Lock to keep from accidentally starting
avideo in portrait orientation. It’s perfect when you’re using body
andhandheldmounts.
CAPTURE SCREEN
This screen gives you total access to your camera’s capture settings and
provides information about your GoPro. The settings shown vary by mode.
1H:36
100% 100%
1. Camera Mode
2. Recording Time/Photos Remaining
3. Battery Status
4. Capture Options
1
2
4
3
14 15
Getting to Know Your GoPro
USING THE TOUCH SCREEN
Tap
Selects an item, turns a setting on or o.
Swipe Left or Right
Switches between Video, Photo and Time Lapse modes.
Swipe Down From the Edge of the Screen
Open the Dashboard when your camera
isinalandscape orientation.
Swipe Up From the Edge of the Screen
See your videos and photos in the Media Gallery.
Press and Hold
Turn on and adjust Exposure Control.
HERO7 White shoots HD video in two standard resolutions: 1440p
and 1080p.
1440p: Uses maximum frame height to get as much as possible in the
shot. Great for seles and POV footage. Black bars will appear on both
sides of the screen when playing back footage on your TV.
1080p: Crops a little o the top and bottom of the frame to give you
full-screen playback on your TV.
CHANGING THE DEFAULT VIDEO RESOLUTION
Your GoPro is set to record in 1440p by default, but it can be easily changed
to 1080p.
1. Swipe down to access the Dashboard.
2. Tap Preferences > Defaults > Video Resolution.
RECORDING VIDEO
1. Swipe left or right to
.
1H:36
100% 100%
2. Press the Shutter button
to start recording.
3. Press the Shutter button
again to stop recording.
Recording Video
16 17
Recording Video
Heads Up: The screen will sleep after 1 minute of recording to save power.
Tap the screen to turn it back on. It will wake for 10 seconds before going
back to sleep.
PRO TIP: You can also record video using voice commands.
SeeControlling Your GoPro with Your Voice (page 32).
RECORDING SHORT CLIPS
HERO7 White can shoot short video clips that are quick and easy to save
on your phone and share on social media. They’re also perfect for creating
QuikStories with the GoPro App.
1. From the Video screen, tap
.
1H:36
100% 100%
Recording Video
2. Press the Shutter button
to start recording. A border will start
circling your screen to show you how much time is left in your clip.
Your camera will stop recording automatically at the end of the clip.
You can also stop recording by pressing the Shutter button
before
the clip is nished.
CHANGING THE CLIP LENGTH
The default clip length is 15 seconds, but you can set it to record
30-second clips instead.
1. Swipe down to access the Dashboard.
2. Tap Preferences > Defaults > Clip Length.
PRO TIP: Clips can be shot in normal speed or in Slo-Mo.
18 19
Recording Video
RECORDING IN SLOW MOTION
HERO7 White lets you capture the action at 60 frames per second (fps),
then play it back at 2x slow motion.
1. From the Video screen, tap
.
1H:36
100% 100%
2. Press the Shutter button
to start recording.
3. Press the Shutter button
again to stop recording.
PRO TIP: You can play back videos that you recorded in Slo-Mo
at 2xslow motion or normal speed. See Playing Back Your Media
(page 36).
Recording Video
USING TOUCH ZOOM
Touch Zoom helps you capture a closer view of the action.
1. From the Video screen, tap
.
1H:36
100% 100%
2. Use the slider to choose how much you want to zoom. You can also
adjust the zoom while you’re recording.
3. Tap anywhere to exit. The zoom level is locked until you re-adjust it,
switch capture modes or turn o your camera.
Heads Up: HERO7 White will automatically turn o Slo-Mo when you
activate Touch Zoom.
PRO TIP: You can zoom in to help eliminate the sheye look around
theedge of your video.
20 21
VIDEO STABILISATION
Your GoPro automatically stabilizes your footage to help eliminate
camera shake whether it’s handheld or mounted to your gear. This makes
itperfect for shooting smooth footage of biking, skating, skiing and more.
RECORDING VIDEO WITH QUIKCAPTURE
QuikCapture is the fastest and easiest way to power on your GoPro
andstart recording. All it takes is the push of a single button.
1. With your camera o, press the Shutter button
.
2. Press the Shutter button
again to stop recording and turn o
yourcamera.
TURNING QUIKCAPTURE OFF
QuikCapture is on by default, but you can turn it o.
1. Swipe down to access the Dashboard.
2. Tap
.
Heads Up: If your camera has been o for more than 12 hours, it will
take alittle longer to power up and start recording. When you’re done
recording, your camera will stay ready and will start up immediately
anytime you use QuikCapture during the next 12 hours.
PRO TIP: Since it only turns the camera on when it’s recording,
QuikCapture is a great way to maximise battery life.
Recording Video
ADDING HILIGHT TAGS
Mark your favourite moments in your videos by pressing the Mode
button
during recording or playback. This adds a HiLight Tag that
makes those moments easier to nd when you’re watching your footage,
creatinga video or looking for a certain shot.
You can also add HiLight Tags by using the GoPro App orsaying “GoPro
HiLight” when Voice Control is on.
PRO TIP: QuikStories looks for HiLight Tags when it creates videos. This
helps ensure that your favourite moments are included in your stories.
Recording Video
22 23
HERO7 White takes 10 MP photos with a wide eld of view (FOV).
Thewide FOV helps you capture as much as possible within the frame.
TAKING A SINGLE PHOTO
1. Swipe right to
.
999+
100% 100%
2. Press the Shutter button
to take a photo.
PRO TIP: You can use the GoPro App to crop your photos if you want
toeliminate the sheye look around the edge of the frame.
Taking Photos Taking Photos
TAKING CONTINUOUS PHOTOS
Press and hold the Shutter button
to take photos at a rate of 4 per
second. Release the button to stop capturing.
TAKING BURST PHOTOS
Burst takes 15 photos in 1 second. It’s perfect for capturing fast action.
1. From the Photo screen, tap
.
999+
100% 100%
2. Press the Shutter button
to take a burst.
PRO TIP: Check out your burst photos in the Media Gallery and save only
the best shots. This will free up space on your SD card. See Playing Back
Your Media (page 36).
24 25
SETTING UP THE PHOTO TIMER
Use the Timer for seles, group shots and more.
1. From the Photo screen, tap
.
999+
100% 100%
2. Choose 3 seconds (great for seles) or 10 seconds
(greatforgroupshots).
10s
3s
Taking Photos
3. Press the Shutter button
. Your camera will start the countdown.
Itwill also beep and the front status light will blink. Both will speed up
asthe time winds down before snapping the photo.
3
Heads Up: The Photo Timer will stay on after you’ve taken the photo until
you tap it o.
Taking Photos
26 27
USING TOUCH ZOOM
Touch Zoom helps you capture a closer view of the action.
1. From the Photo screen, tap
.
999+
100% 100%
2. Use the slider to choose how much you want to zoom.
3. Tap anywhere to exit. The zoom level is locked until you re-adjust it,
switch capture modes or turn o your camera.
PRO TIP: You can set up your shot using any combination of Burst,
Photo Timer and Touch Zoom that you want.
Taking Photos
Time Lapse Video speeds up the action by capturing a frame every
0.5seconds. When played back at regular speed, everything moves
15xfaster than normal.
CAPTURING TIME LAPSE VIDEO
1. Swipe left to
.
2H:11
100% 100%
2. Press the Shutter button
to start recording.
3. Press the Shutter button
again to stop recording.
PRO TIP: Since Time Lapse Video speeds everything up 15x, 5 minutes
of recording will capture about 20 seconds of video.
Capturing Time Lapse
28 29
Capturing Time Lapse
USING TOUCH ZOOM
Touch Zoom helps you capture a closer view of the action.
1. From the Time Lapse screen, tap
.
2H:11
100% 100%
2. Use the slider to choose how much you want to zoom.
3. Tap anywhere to exit. The zoom level is locked until you re-adjust it,
switch capture modes or turn o your camera.
HERO7 White scans the entire scene to choose the exposure level for your
shot. Exposure Control lets you decide if only a section of the shot should
be used to set the exposure.
Check out the shot preview on your touch screen. Try Exposure Control
ifthere are sections that are too dark or too light.
SETTING EXPOSURE CONTROL USING AUTO EXPOSURE
With this option, the camera automatically bases exposure on the area
that you select.
Imagine your camera is mounted on your dashboard. You probably want
to set the exposure based on the scene outside the car instead of the
dashboard. This will help prevent your shots from being overexposed
(toobright).
1. Press the touch screen until a set of brackets with a dot in the middle
appears in the centre of the screen. This is the Spot Meter. It will base
the exposure on the centre of the shot.
2. Drag the brackets away from the centre if you want to use another
area of the shot to set the exposure. (You can also tap that area
instead of dragging the brackets.)
3. Check the screen to see if the exposure looks good. Tap
inthelower right corner.
AUTO EXPOSURE
Exposure Control
30 31
SETTING EXPOSURE CONTROL USING LOCKED EXPOSURE
With this option, your camera locks the exposure until you cancel it.
If you’re snowboarding on a sunny day, you might try locking the exposure
on your subject’s jacket. This will help prevent your shots from being
underexposed (too dark) compared to the bright snow.
1. Press the touch screen until a set of brackets with a dot in the middle
appears in the centre of the screen. This is the Spot Meter. It will base
the exposure on the centre of the shot.
2. Drag the brackets away from the centre if you want to use another
area of the shot to set the exposure. (You can also tap that area
instead of dragging the brackets.)
3. Tap inside the brackets to lock the exposure.
4. Check the screen to see if the exposure looks good. Tap
inthelower right corner to lock it in.
LOCKED EXPOSURE
Exposure Control
Turning Exposure Control O
Exposure Control is automatically turned o when you switch capture
modes or restart your camera. It can also be turned o manually.
1. Press the touch screen until a square appears in the middle.
2. Tap
in the lower left corner.
Heads Up: After cancelling Exposure Control, your camera will go back
toautomatically using the entire scene to set the exposure level.
Exposure Control
32 33
Voice Control gives you easy hands-free control of your GoPro. It’s great
when you’re busy with handlebars, ski poles and more. Just tell your
GoPro what you want it to do.
TURNING VOICE CONTROL ON + OFF
1. Swipe down to access the Dashboard.
2. Tap
to turn Voice Control on or o.
Controlling Your GoPro With Your Voice
LIST OF VOICE COMMANDS
There are two types of voice commands – Action commands
andModecommands.
Using Action Commands
These commands let you switch modes on the go. If you just recorded
avideo, you can say “GoPro take a photo” to snap a photo without
manually switching modes.
Action Command Description
GoPro start recording Starts recording video.
GoPro HiLight Adds a HiLight Tag to your video
duringrecording.
GoPro stop recording Stops recording video.
GoPro take a photo Takes a single photo.
GoPro shoot burst Takes burst photos.
GoPro start time lapse Starts taking time lapse video.
GoPro stop time lapse Stops taking time lapse video.
GoPro turn o Turns your camera o.
Heads Up: You can turn o your GoPro
with your voice, but you must use the
Mode button
to turn it on.
Controlling Your GoPro With Your Voice
34 35
Using Mode Commands
Use these commands to switch capture modes on the go. Then say,
“GoPro Capture” or press the Shutter button to get the shot.
Mode Command Description
GoPro Video mode Switches your camera to Video mode
(does not start recording).
GoPro Photo mode Switches your camera to Photo mode
(does not take a photo).
GoPro Burst mode Switches your camera to Burst mode
(does not start taking burst photos).
GoPro Time Lapse mode Switches your camera to Time Lapse
Video mode (does not start recording).
GoPro Capture Starts capturing videos or photos
inthemode you selected.
GoPro Stop Capture Stops capture in Video and Time Lapse
Video mode. Photo and Burst modes
stop on their own.
PRO TIP: If you’re recording video or time lapse, you must stop recording
before trying a new command.
Controlling Your GoPro With Your Voice
SEE A COMPLETE LIST OF COMMANDS ON YOUR CAMERA
1. Swipe down to access the Dashboard.
2. Tap Preferences > Voice Control > Commands.
CHANGING YOUR VOICE CONTROL LANGUAGE
1. Swipe down to access the Dashboard.
2. Tap Preferences > Voice Control > Language.
Heads Up: Voice Control may be aected by wind, noise, and your
distance from the camera. Keep your camera clean and wipe away
any debris forthe best performance.
Controlling Your GoPro With Your Voice
36 37
Swipe up to see the last video, photo or burst that you took. Swipe left
and right to ip through the other media on your SD card.
00:00 / 00:00 00:00 / 00:00
The Media Gallery includes the following playback options:
Pause playback
Resume playback
See all of the media on your SD card
Delete the le from your SD card
Play back in slow motion/normal speed
Use a slider to scan through your videos,
burstsandtimelapsephotos
Add/remove HiLight Tag
Playing Back Your Media
Adjust the playback volume
Go to the previous or next photo in a burst or group
ofcontinuousphotos
Heads Up: The playback options will vary based on the type of media
you’re viewing.
PRO TIP: Some playback options are not available when you’re holding
your camera in portrait orientation. Make adjustments to those settings
inlandscape orientation before rotating your camera.
Playing Back Your Media
38 39
USING GALLERY VIEW
Gallery view gives you quick access to all of the videos and photos stored
on your SD card.
1. From the playback screen, tap
.
00:10
MEDIA (34)
2. Swipe up to scroll through your media.
3. Tap a video or photo to see it in full-screen view.
4. Tap
to add a HiLight Tag.
5. Tap
to go back to the playback screen.
Heads Up: Gallery view is not available when you’re holding your camera
in portrait orientation. Also, the more content you have on your SD card,
thelonger it will take to load.
Playing Back Your Media
Deleting Multiple Files
1. Tap
.
2. Tap all of the les that you want to delete. Tap a le again if you want
to de-select it.
3. Tap
to delete the selected les.
VIEWING VIDEOS + PHOTOS ON A MOBILE DEVICE
1. Connect your camera to the GoPro App. For details, see Connecting
to the GoPro App (page 40).
2. Use the controls on the app to play back, edit, and share your
videosand photos.
PRO TIP: Use the GoPro App to grab still photos from videos, create
short shareable videos from full-length footage, save media to your
phoneand more.
VIEWING VIDEOS + PHOTOS ON A COMPUTER
To see your media on a computer, you must rst save the les
tothecomputer. For details, see Transferring Your Media (page 41).
Playing Back Your Media
40 41
Use the GoPro mobile App to control your HERO7 White, share videos
and photos on the go and automatically transform your footage into
QuikStories – stunning videos synced with eects and music.
CONNECTING FOR THE FIRST TIME
1. Download the GoPro App from the Apple App Store or Google Play.
2. Follow the apps on-screen instructions to connect your camera.
Heads Up for iOS: When prompted, make sure that you allow
notications from the GoPro App so you know when a QuikStory
isready. See Creating a QuikStory (page 41).
AFTER THE FIRST TIME
After you’ve connected once, you can start connecting through your
camera’s Connections menu.
1. If your camera’s wireless is not already on, swipe down to access
theDashboard.
2. Tap Preferences > Connections > GoPro App.
3. Follow the on-screen instructions in the GoPro App to connect.
SETTING THE CONNECTION SPEED
Your GoPro is set to use the 5GHz Wi-Fi band (the fastest available)
when connecting to other mobile devices.
Change the Wi-Fi band to 2.4GHz if your device or region does not
support 5GHz.
1. Swipe down to access the Dashboard.
2. Tap Preferences > Connections > Wi-Fi Band.
Connecting to the GoPro App
CREATING A QUIKSTORY
You can set up your GoPro to automatically send videos and photos to
your phone. The GoPro App will use them to create QuikStories – fully
edited videos complete with music and eects.
1. Connect your camera to the GoPro App. See Connecting to the
GoPro App (page 40).
2. Swipe down on the app’s home screen. Shots from your most recent
session will be copied to your phone and transformed into a QuikStory.
3. Tap your QuikStory to view it. If you don’t have the Quik app, you’ll be
prompted to install it.
4. Make any edits you’d like in the Quik app.
5. Save the QuikStory or share it with your friends.
Transferring Your Media
42 43
TRANSFERRING YOUR MEDIA TO A COMPUTER
You can copy your videos and photos to a computer for playback
andediting.
1. Ensure that your computer is running the latest version of its
operating system.
2. Download and install the Quik desktop app from gopro.com/apps.
3. Connect your camera to your computer using the USB-C
cableincluded.
4. Power on your camera and follow the on-screen instructions
intheQuik app.
TRANSFERRING DIRECTLY FROM YOUR SD CARD
1. Remove the SD card from your camera.
2. Insert the card into an SD card reader or adaptor.
3. Plug the card reader into your computer’s USB port or insert
theadaptor into the SD card slot.
4. Copy the les to your computer.
Transferring Your Media
AUTOUPLOADING TO THE CLOUD
With a GoPro Plus subscription, you can automatically upload your media
to the cloud where you can view, edit, and share it from any device.
1. Subscribe to GoPro Plus:
a. Download the GoPro App to your device from the Apple App
Store or Google Play.
b. Follow the apps on-screen instructions to connect your camera.
c. If you’re connecting for the rst time, follow the on-screen
instructions to subscribe to GoPro Plus. Otherwise, tap
onthe camera chooser screen.
2. Connect your camera to a power outlet. Auto Upload will start when
the battery is fully charged.
After rst-time setup, your camera won’t need to connect to the app to
start Auto Upload.
Heads Up: Your original les remain on your camera even after they’ve
been backed up to the cloud.
PRO TIP: If you’re saving les to your computer, the Quik desktop app
will automatically upload them to your GoPro Plus account.
Transferring Your Media
44 45
MANUALLY UPLOADING TO THE CLOUD
Transfer your media to the cloud without waiting for your camera to fully
charge. (Your GoPro must still be connected to a power outlet).
1. Subscribe to GoPro Plus. See Auto-Uploading to the Cloud
(page 43).
2. Connect your camera to a power outlet.
3. Swipe down to access the Dashboard.
4. Tap Preferences > GoPro Plus > Manual Upload.
TURNING AUTO UPLOAD OFF
You can keep your camera from trying to upload every time it’s connected
to a power outlet and fully charged.
1. Swipe down to access the Dashboard.
2. Tap Preferences > GoPro Plus > Auto Upload
3. Tap O.
ACCESSING YOUR CLOUD MEDIA
1. Open the GoPro App on your device.
2. Tap
, and select Cloud tab to view, edit and share your content.
PRO TIP: To create a QuikStory using your cloud media, launch the Quik
mobile app, tap
, then select GoPro Plus.
Transferring Your Media
CONNECTING TO A DIFFERENT WIRELESS NETWORK
1. Swipe down to access the Dashboard.
2. Tap Preferences > GoPro Plus > Networks.
3. Choose a network. The network can’t be hidden or require
an end-user licence agreement (for example, a network in a hotel).
4. Enter the password if needed.
5. Tap
to save the network.
CHANGING YOUR GOPRO PLUS PREFERENCES
Manage your Auto Upload settings, set up your wireless
networkandmore.
1. Swipe down to access the Dashboard.
2. Tap Preferences > GoPro Plus.
Heads Up: GoPro Plus will be available in your Preferences
afteryou’vesigned up.
Transferring Your Media
46 47
USING THE DASHBOARD
With your camera in landscape orientation, swipe down to access
theDashboard and Preferences.
03/06/18
AM
PM
07:00
Preferences
10/07/18
DASHBOARD FEATURES
The Dashboard lets you quickly tap the following settings on and o:
Voice Control
Camera Beeps
QuikCapture
Screen Lock
Customising Your GoPro Customising Your GoPro
03/06/18
AM
PM
07:00
Preferences
10/07/18
CONNECTION STATUS
Check the top of the Dashboard to see your connection status.
Camera is connected to the GoPro App (white)
Camera is not paired with the GoPro App (grey)
Camera is not connected to the GoPro App (grey)
Auto Upload is on and ready (white)
Auto Upload is o (grey)
Auto Upload is on, but not ready (grey)
48 49
SETTING UP YOUR PREFERENCES
Tap Preferences to set up your GoPro any way you want.
CONNECTIONS
Turn on wireless connections, connect new devices, set the Wi-Fi band
and more. See Connecting to the GoPro App (page 40) and Setting the
Connection Speed (page 40).
DEFAULTS
Choose your default Mode (the mode that your GoPro captures in when
you turn it on using the Mode button
,
Short Clip length and default
Video Resolution.
GENERAL
Heres everything you’ll nd under General settings:
Beep Volume
Choose High (default), Med, Low or O. The volume you set here can
betoggled on or o using the Dashboard.
Auto Power O
Choose 5 Min, 15 Min (default), 30 Min or Never.
Customising Your GoPro Customising Your GoPro
LEDs
Set which status lights blink. Choose All On (default), All O, or Front O.
Time and Date
Use to manually adjust the time and date. Both are automatically updated
when you connect your camera to the GoPro App or Quik desktop app.
Date Format
This is set automatically based on the language you chose at setup.
Youcan also change it manually here.
VOICE CONTROL
Choose your Voice Control language and see a full list of commands.
50 51
Customising Your GoPro
TOUCH SCREEN
Turn on Landscape Lock, set the Screen Saver and adjust the touch
screens brightness.
Heads Up: The camera buttons and Voice Control still work even
whenthe screen is o.
REGIONAL
Choose your language and set up your GoPro to work in your region.
Language
Choose the language that appears on your camera.
Video Format
Choose NTSC for North America or PAL if you’re outside North America.
The right format for your region will help prevent icker on a TV/HDTV
when you play back video that was recorded indoors.
Regulatory
See all of your camera’s certications.
Customising Your GoPro
ABOUT
Update your GoPro, plus nd your camera’s name, serial number
andsoftware version.
RESET
Format your SD card, reset your camera’s default settings, reset the
camera tips or use Factory reset to clear your camera and restore its
original settings.
52 53
Problems are rare, but HERO7 White will let you know if anything comes
up. Here are some of the messages you may see.
HIGH TEMPERATURE
The Temperature icon appears on the touch screen if your camera
becomes too hot and needs to cool down. Your camera was designed
to recognise when it’s at risk of overheating and will shut down when
needed. Simply let it sit and cool before using it again.
Heads Up: High temperatures will cause your camera to use more power
and drain the battery faster.
FILE REPAIR
HERO7 White will automatically try to x damaged les. Files can
be damaged if your camera loses power while recording or if there’s
aproblem saving the le. The File Repair icon will appear on the touch
screen when a repair is in progress. Your camera will let you know when
it’s nished and if the le was xed.
MEMORY CARD FULL
Your camera will let you know when your SD card is full. You’ll need to
move or delete some les if you want to keep recording.
Important Messages
RESTARTING YOUR GOPRO
If your camera is not responding, press and hold the Mode button
for10 seconds. This will restart your camera. There will be no changes
toyour settings.
RESTORE ALL SETTINGS TO THE DEFAULTS
This will reset all of your camera settings to the defaults, except your
camera name and password, Language and Video Format.
1. Swipe down to access the Dashboard.
2. Tap Preferences > Reset > Reset Defaults.
RESETTING CONNECTIONS
This will clear your device connections and reset your cameras password.
Resetting connections means you’ll have to reconnect all of your devices.
Swipe down to access the Dashboard.
1. Tap Preferences > Connections > Reset Connections.
RESETTING THE CAMERA TIPS
Want to see the camera tips again? Here’s how to see them all
fromthebeginning.
1. Swipe down to access the Dashboard.
2. Tap Preferences > Reset > Reset Camera Tips.
Resetting Your Camera
54 55
Resetting Your Camera
RESTORING FACTORY SETTINGS
This will restore all of your camera’s original settings, clear all device
connections, and deregister your camera from GoPro Plus. This is useful
ifyou’re giving your camera to a friend and want to completely reset it
toits original state.
1. Swipe down to access the Dashboard.
2. Tap Preferences > Reset > Factory Reset.
Heads Up: Restoring the factory settings will not delete any content
fromyour SD card or have any eect on your camera’s software.
MOUNTING HARDWARE
1. The Frame
2. Mounting Buckle
3. Thumb Screw
4. Curved + Flat
AdhesiveMounts
4
1
2
3
Mounting Your GoPro
28

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

GoPro-Hero-7-White
  • Waarom is de taal niet beschikbaar op de camera in het Nederlands wat hebben wij aan Arabisch of chinees of nog meerdere talen? Denk dat het wenselijk is dat in België het Nederlands wordt vermeld!!!! Gesteld op 13-1-2020 om 21:45

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw GoPro Hero 7 White bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van GoPro Hero 7 White in de taal/talen: Engels als bijlage per email.

De handleiding is 2,57 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van GoPro Hero 7 White

GoPro Hero 7 White Gebruiksaanwijzing - Nederlands - 36 pagina's

GoPro Hero 7 White Gebruiksaanwijzing - Deutsch - 36 pagina's

GoPro Hero 7 White Gebruiksaanwijzing - Français - 35 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info