814086
14
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
22.
Alarm warnings:
In the event of a technical failure the circuit board will react and give warning of
the failure by switching on the LED alarm (LED alarm – on) and a warning sound
will be heard. The following alarms can be activated:
Each alarm will ensure that the stove is switched off immediately. WITH
THE EXCEPTANCE OF THE ALARM INDICATING A POWER CUT, the alarm
alert is activated at the end of a certain length of time and can be reset by
continually pressing the P3 button. Every time an alarm is reset the
switching off stage of the stove will restart for safety precautions. During
the alarm alert the alarm LED (Alarm LED on) is always on and the buzzer
(alarm sound) will sound intermittently when activated. If the alarm is not
reset the stove will be switched off and the alarm alert is always shown.
AL 1 – POWER CUT
A power cut can occur while the stove is on. If the cut is less than 20 seconds the
stove will switch back to the users mode. When this is activated and the power
cut is longer than 20 seconds the alarm is activated. 'AL 1 POWER CUT 'will
appear in the display and the stove is switched off.
Al 2 – AIR SENSOR (safety temperature thermostat)
This alarm is activated if the safety temperature thermostat is defect. The stove
switches to the alarm mode and the alarm – LED is activated. (Alarm-LED on).
The display will show “Al 2 air sensor and the stove is switched off.
AL 3 – FLUE GAS TEMPERATURE SENSOR (flue gas overheating)
This alarm is activated when the safety temperature thermostat detects that a
fixed temperature which cannot be changed has been exceeded. 'AL flue gas
temperature sensor 'appears in the display and the stove is switched off.
23.
AL 4 – SMOKE EXTRACTOR FAN
This alarm will be activated when the extractor fan is defect. The alarm will go off
and the signal “AL 4 smoke extractor fan” will appear in the display.
AL 5 – NO FLAME (no ignition):
This alarm will be activated when the ignition fails. This happens when the
temperature of the flue gas does not exceed the programmed temperature after
the set time. “Al 5 no flame “will appear in the display and the stove switches to
the alarm mode.
AL 6 – NO PELLETS
This alarm is activated when the flue gas temperature drops below the minimum
set temperature during the use of the stove .The signal 'AL 6 – no pellets' will
appear in the display and the alarm will be set off.
AL 7 – TEMPERATURE SAFETY
(Safety thermostat for too high a temperature):
This happens when the safely thermostat registers a temperature which is higher
than the limit. The thermostat reacts and switches off the auger. The display
shows the alarm is on (LED –alarm on) by the ´AL 7 temperature safety´ sign
and the stove is switched off.
AL 8 – PRESSURE ERROR (no vacuum / chimney draught)
This occurs when the pressure gauge detects pressure which is higher than the
limited pressure. The pressure gauge reacts and switches the auger off. The
alarm (LED alarm) is indicated by 'AL8 pressure error' in the display and the
stove is switched off.
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Globe Fire Christoph bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Globe Fire Christoph in de taal/talen: Engels als bijlage per email.

De handleiding is 1.77 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Globe Fire Christoph

Globe Fire Christoph Gebruiksaanwijzing - Nederlands - 16 pagina's

Globe Fire Christoph Gebruiksaanwijzing - Deutsch - 16 pagina's

Globe Fire Christoph Gebruiksaanwijzing - Français - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info