Faults and rectification
Fault Possible causes and solution
The MSF signal for the time can-
not be received.
- Check the location, see page 16.
- Start the radio reception manu-
ally, if necessary, see page 15.
- Set the time manually, see
page 14.
The temperature display of the
sensor appears too high.
- Check whether the sensor is
exposed to direct sunlight.
The weather station does not
receive any sensor signals.
- Ensure that no electrical disrup-
tion sources are near the sensor
or the base station.
- Check the batteries in the sen-
sor.
- Start the radio reception manu-
ally: Keep the
CHANNEL button
pressed on the base station until
the display for weather data
OUT flashes. You can also keep
the TX button pressed in the
battery compartment of the
radio sensor in order to transfer
the data to the base station
more quickly.
- Move the weather station closer
to the sensor or vice versa.
The display is illegible, the func-
tion is unclear or the values are
obviously incorrect.
- Reset the weather station to its
original factory settings, see
page 33.
