607030
5
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
Installation and
Operating Instructions
Door Station Stainless Steel
2501 20, 2502 20, 2503 20
2504 20, 2506 20, 2508 20
2509 20, 2510 20, 2512 20
3
Table of contents
Device description ......................................................................................................5
Installing panel box.....................................................................................................6
Installing front panel ...................................................................................................8
Start-up ......................................................................................................................9
Multi-function input ....................................................................................................9
Replacing inscription label ........................................................................................10
Opening Door Station Stainless Steel........................................................................12
Operation..................................................................................................................13
Technical data.......................................................................................................... 14
Warranty.................................................................................................................. 14
4
5
Device description
The Door Station Stainless Steel is a pre-assembled, vandalism-protected door station for
the Gira door communication system.
The front plate of high-quality V2A stainless steel with a thickness of 3 mm is especially
robust. The call buttons are also made of durable stainless steel. The illuminated inscrip-
tion labels are covered by a fully secured and flameproof glass plate. The inscription labels
can be opened via a covered mechanism and can then removed from the front.
Both the call buttons and inscription labels are uniformly illuminated with a white, power-
saving LED element.
Loudspeaker and microphone are located behind the respective sound openings and are
water-resistant and vandal-proof.
2
3
6
7
8
9
10
1
4
4
5
4
1 Wall anchors (included)
2Panel box
3Locking plate
4 Plastic bracket
5Catch strap hook
6Front panel
7Loudspeaker cover
8Microphone
9 Name plate
10 Call buttons
6
Installing panel box
1. Select a suitable installation site and chisel an
opening in the wall.
2. If necessary, mount the included wall anchor.
Note the following information when mounting the
panel box:
Ensure installation position is correct. (note the "TOP"
labelling).
The panel box must be installed level. With the later
mounting of the Door Station Stainless Steel there is
no possibility for correction.
The panel box must be installed as flush to the sur-
face as possible!
It must be ensured that the locking plate can be flush-
mounted later. Maximum plaster compensation is
20 mm.
3. Plaster in the panel box to be flush with the final
surface (maximum plaster compensation 20 mm).
Attention
Installation and mounting of electrical devices may
only be carried out by a qualified electrician.
max.
20 mm
7
4. Mount the included plaster protection.
5. Plaster the wall.
6. Carefully remove the plaster and take out the plas-
ter protection.
8
Installing front panel
1. Insert the locking plate flushly into the panel box.
Push the locking plate inwards until the plastic
brackets touch the wall.
2. Fasten the locking plate with the 4 Allen bolts and
locking washers included.
In order to guarantee a secure fastening of the front
panel later, the Allen bolts must be firmly tightened.
3. Fold out both lateral mounting retainers (1.), slide
the front panel of the Door Station Stainless Steel
into the mounting retainers (2.) and attach the catch
strap of the front panel to the hook of the locking
plate (3.).
4. Connect the 2-wire bus to the Bus terminals.
i
Insert locking plate evenly
The locking plate must not be twisted while being
inserted into the panel box and must not be under
tension.
2.
1.
3.
ZV BUS
i
9
Starting up
Once all of the devices (door and home stations, control device etc.) have been installed,
the door communication system can be started up.
Start-up a door station is described in the system manual included with the control device.
Multi-function input
A mechanical push button can be connected to the
multi-function input of the stainless steel door
station's built-in loudspeaker via the included connec-
tion cable.
The push button then has the same function as a call but-
ton and can therefore be used, for example, as a call but-
ton or for controlling a switching actuator.
5. Pull the front panel from the mounting retainers (1.)
and fold these in (2.).
6. Position the (lower) fastening bolt(s) of the front
panel to "Close".
7. Mount the front panel onto the guide bolts and
press it on until the upper and lower fastening bolts
engage.
1.
2.
Open
Close
10
Replacing inscription label
Inscription labels
For labelling the Gira Door Station Stainless Steel, use only Gira inscription labels.
The transparent plastic labels are non-fading, weather-resistant and wrinkle-free.
With the included release code, inscription labels for the first labelling are available free
at www.marking.gira.com
1. Unlock the call button with the enclosed plastic key:
twist the plastic key anti-clockwise until it engages.
2. Engage the call button:
press the call button firmly inwards by approx. 1 cm.
The call button engages and stays in the pressed
position.
3. Grip under the glass cover with the flat side of the
plastic key and twist out the inscription label carrier.
4. Remove the existing inscription label and slide the
new inscription label into the inscription label carrier
until it stops.
120°
c
l
i
c
k
c
l
i
c
k
1 cm
Do not remove the inscription label carrier.
Do not lift and remove the inscription label carrier!
M
u
s
t
e
r
m
a
n
n
11
5. Position the inscription label underneath the clips of
the inscription label carrier.
6. Slide in the inscription label carrier again.
At the same time, position the inscription label with
your finger.
7. Release the call button:
To do this, press in the plastic key slightly and turn it
clockwise until the call button is released from the
lower position.
8. Lock the call button:
To do this, turn the plastic key clockwise again until
it engages.
9. For function test, press the call button:
the call button is correctly locked when
•the call button cannot be pressed in deeply and
an acknowledgement tone is heard when the call
button is pressed.
If the call button is not correctly locked, please repeat
step 8.
ustermann
c
l
i
c
k
ustermann
c
l
i
c
k
12
Opening Door Station Stainless Steel
The included opening tool is required for opening the
Door Station Stainless Steel.
1. Turn the (lower) fastening bolt(s) with the opening
tool to "Open".
Single-column door stations have one lower fasten-
ing bolt, double-column door stations have two
lower fastening bolts.
The position of the fastening bolts is shown via
small recesses on the lower side of the front panel.
2. Lift the front panel from the lower attachment (1.)
and pull it at an angle downwards from the upper
attachment retainers (2.).
90°
Open
90°
Open
90°
Open
Take care with plastered walls
With repeated opening of the door station with
plastered walls, the opening tool may damage the
plaster.
2.
1.
13
Operation
Volume setting
The volume can be set separately at each door station.
The volume setting must be made by two people.
Initiating a call (ringing)
Switching light on (in conjunction with a switching actuator)
1. Press the "Systemprogr." button on the control device for 3
sec. to start programming mode.
2. Briefly press a previously assigned call button at the door
station.
3. The second person accepts the door call at the home station
(via receiver or speech button) and starts speaking.
4. Briefly press the call button again at the door station.
Volume changes during the voice connection when the button
is pressed.
There are four volume levels in total.
The next-highest volume is set with each button press. When
the loudest volume level is reached, the next button press sets
the quietest volume level.
5. Ending the voice connection.
The most recently set volume level is saved in the door sta-
tion.
6. Briefly press the "Systemprogr." button on the control device
to exit the programming mode.
1. Press the call button to trigger a call tone at the assigned
home station.
The button press is confirmed by an additional acknowledge-
ment tone.
If the conversation is accepted by the home station, the micro-
phone opening is illuminated blue.
1. Press the call button to switch on light or another device via
an assigned switching actuator.
The button press is confirmed by an additional acknowledge-
ment tone.
1 x
M. Meier
1 x
M. Meier
M. Meier
Licht
14
Technical data
Connections: 2 screw terminals for 2-wire bus
2 screw terminals for additional supply
2 system bus connector strips (6-pole)
1 video connector strip (2-pole)
2 sabotage contact screw terminals
Protection type: IP 44
Operating temperature: -25 °C to +70 °C
Dimensions (W x H x D):
1-gang, 2-gang, 3-gang: 140 x 198 x 40 mm (panel box)
160 x 218 x 3 mm (front panel)
4-gang, 6-gang: 140 x 265 x 40 mm (panel box)
160 x 285 x 3 mm (front panel)
8-gang, 9-gang: 140 x 332 x 40 mm (panel box)
160 x 352 x 3 mm (front panel)
10-gang, 12-gang: 250 x 265 x 40 mm (panel box)
270 x 285 x 3 mm (front panel)
Warranty
The warranty is provided in accordance with statutory requirements via the specialist
trade.
Please submit or send faulty devices postage paid together with an error description to
your responsible salesperson (specialist trade/installation company/electrical specialist
trade).
They will forward the devices to the Gira Service Center.
Gira
Giersiepen GmbH & Co. KG
Elektro-Installations-
Systeme
Postfach 1220
42461 Radevormwald
Deutschland
Tel +49 (0) 21 95 / 602 - 0
Fax +49 (0) 21 95 / 602 - 191
www.gira.de
info@gira.de
10 41 09 22 20/11
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gira 251020 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gira 251020 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,19 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Gira 251020

Gira 251020 Gebruiksaanwijzing en installatiehandleiding - Nederlands - 16 pagina's

Gira 251020 Gebruiksaanwijzing - Deutsch - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info