783843
15
Verklein
Vergroot
Pagina terug
1/18
Pagina verder
32
EMC
Note:
The device is subject to special EMC precautions and it must be installed and used in accordance
with these guidelines.
The electromagnetic eld can affect the device performance, so other equipment used near the de-
vice must meet the corresponding EMC requirements. Mobile phones, X-rays or MRI devices are
possible interference source, as they can emit high-intensity electromagnetic radiation.
Refer to above chapters for the minimum value of users physiological signal. Inaccurate result will
appear when the device operates with the values lower than the descriptions in above chapter
The use of ACCESSORIES, transducers and cables other than those specied, with the exception
of transducers and cables sold by the MANUFACTURER of the ME EQUIPMENT or ME SYSTEM
as replacement parts for internal components, may result in increased EMISSIONS or decreased
IMMUNITY of the ME EQUIPMENT or ME SYSTEM.
The device should not be used adjacent to or stacked with other equipment and that if adjacent or
stacked use is necessary, it should be observed to verify normal operation in the conguration in
which it will be used.
Devices or systems may still be interfered by other equipment, even if other equipment meets the
requirements of the corresponding national standard.
Basic performance: SpO2 measured range: 70% ~ 100%, absolute error: ±2%; PR measured range:
30 bpm ~ 250 bpm, accuracy: ±2 bpm or ±2%, whichever is greater.
The following cable types must be used to ensure that they comply with interference radiation and im-
munity standards:
APPENDIX 1
ENGLISH
N. Name Cable length(m) Shielding or not Remark
1 USB cable 1,0 Yes
2SpO2 probe 1,5 No
State Prompt condition delay Prompt signal generation delay
Low voltage prompt 1 s 20 ms
SpO2 prompt 330 ms 20 ms
Pulse rate prompt 330 ms 20 ms
Probe error prompt 16 ms 20 ms
Note 2: because pulse oximeter equipment measurements are statistically distributed, only about two-thirds of pulse oximeter equipment
measurements can be expected to fall within ±Arms of the value measured by a CO-OXIMETER.
Note 3: percentage modulation of infrared signal as the indication of pulsating signal strength, patient simulator has been used to verify
its accuracy under conditions of low perfusion. SpO2 and PR values are different due to low signal conditions, compare them with the
known SpO2 and PR values of input signal.
Note 4: optical sensors as the light-emitting components, will affect other medical devices applied the wavelength range. The information
may be useful for the clinicians who carry out the optical treatment.For example, photodynamic therapy operated by clinician.
Note 5: Patient simulator has been used to verify the pulse rate accuracy, it is stated as the root-mean-square difference between the
PR measurement value and the value set by simulator.
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gima OXY 50 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gima OXY 50 in de taal/talen: Engels als bijlage per email.

De handleiding is 1.06 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Gima OXY 50

Gima OXY 50 Gebruiksaanwijzing - Français - 19 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info