159
Configuring the phone via the Web configurator
Gigaset N300/N300A IP / GBR / A31008-M2214-L101-2-7619 / web-conf.fm / 16.07.13
Version 4, 16.09.2005
Saving and restoring system settings
Once you have configured your base and after each configuration change, you can
save the current base settings in a file on the PC (suffix .cfg).
If you change the settings accidentally or you need to reset the base due to a fault
(base reset), you can reload the saved settings from the file on your PC to your
phone.
The contents of the .cfg file include:
u The settings for the local network (IP configuration)
u The data for the (VoIP) connections established
u The assignment of send and receive connections
u Your own local area code and access code
u The network mailbox number
u The Internet services settings
u The ECO DECT settings.
You can save and restore the system settings via the Web page:
Settings
¢ Management ¢ Save & Restore
Changing the base settings, registering handsets
You can use the Web configurator to:
u Switch the base to registration mode to register handsets to the base. This set-
ting corresponds to pressing and holding the Registration/Paging key on the
front of the base.
u Activate/deactivate Eco Mode or Eco Mode+. For Eco Mode see page 110.
u Change the system PIN (¢page 121) for your phone.
u Activate and deactivate the LED for the Registration/Paging key on the front of
the base. See page 2 for the meaning of the LED.
u Activate/deactivate the display of VoIP status messages on your handset.
The base settings are on the Web page
Settings
¢ Management ¢Miscellaneous
