568241
32
Verklein
Vergroot
Pagina terug
1/39
Pagina verder
2
3
This chapter contains important information on safe and efficient operation. Please read this
information before using the device.
Exposure To Radio Frequency (RF) Energy
The device contains a transmitter and a receiver. When it is ON, it receives and transmits RF energy.
Please use the device appropriately.
Specific Absorption Rate Data
The highest SAR value for this device when tested for use at the ear is 0.626 W/kg.
Road Safety
Check the laws and regulations on the use of phones in the area where you drive. Do NOT use this
device unless you use hands-free operation while driving or riding.
Potentially Explosive Atmospheres
Turn off your phone prior to entering any area with a potentially explosive atmosphere such as gas
stations, explosive chemicals, or flammable objects.
Aircraft Safety
While in flight, switch the device to flight mode (turn off phone or wireless functions). When instructed
to do so, turn off your phone when on board an aircraft.
Facilities
Turn off the device in any facility where posted notices instruct you to do so. These facilities may
include hospitals or health care facilities that may be using equipment that is sensitive to external RF
energy.
Approved Accessories & Batteries
Use only original or manufacturer approved accessories, batteries and chargers.
Safety Information
All mobile products by GIGA-BYTE Communications mentioned in this document, including the
device, accessories, software, text, music, and pictures, are owned by, or authorized by original
manufacturers to GIGA-BYTE Communications. Reproduction, transfer, distribution, or storage of
part or all of the contents in this document in any form without the prior written permission of GIGA-
BYTE Communications Inc. is prohibited.
GIGA-BYTE Group, GIGA-BYTE Communications Inc.
2 0 0 6
g-Smart i Copyright
4
5
This chapter contains important information on safe and efficient operation. Please read this
information before using the device. Ignorance of the following notices may lead to violations of the
law.
Before using the device, please make sure you have fully charged the battery.
Do NOT remove the battery from the device during charging.
Before inserting SIM card into the device, make sure that the device is switched off.
Do NOT attempt to dissemble the device on your own. This should be done by an authorized
person.
Use the device in accordance to instructions when in public facilities.
In some countries, it is a violation against the law to record phone conversations. Always ask
permission of the other party when you are going to record a conversation.
General Information
Chapter 1 Getting Started with g-smart i .............................................8
1.1 Getting to Know Your Device
08
1.2 Key Definition
10
1.3 Install and Charge Battery
11
1.4 Using Stylus
11
1.5 Screen Alignment and Settings
12
1.6 Time and Date Settings
12
1.7 Power On/Off, Sleep Mode
13
1.8 My Information Setup
13
1.9 Password Setup
14
1.10 Device Lock
14
1.11 System Reboot & Reset
15
1.12 Protect Your Screen
15
1.13 Maintenance
15
1.14 Traveling Advice
16
Chapter 2 Using the Mobile Device ......................................................17
2.1 Today Screen
17
2.2 Start Menu List
18
2.3 Applications
18
2.4 Settings
19
2.5 Input Method
21
Chapter 3 Phone Functions ..................................................................23
3.1 Insert and Remove A SIM Card
23
3.2 Making a Call
23
3.3 How to Use Your Phone
24
3.4 Volume Adjustment
24
3.5 Contacts
25
3.6 Create a New Contact
25
3.7 Call History
26
3.8 Set Ringtone and Password
26
3.9 Copy SIM Card Contacts
27
3.10 Sending Messages
27
3.11 Block List
27
Chapter 4 Personal Settings ................................................................29
4.1 Easy-Touch Menu
29
4.2 Pocket Ghost
29
4.3 Shutdown Animation
29
6
7
4.4 Handset Applications
29
4.5 Change Settings
32
4.6 Hints or Alert
33
4.7 Power Setup
33
4.8 Backlight
33
4.9 Search for a File or Information
34
4.10 Pop-Up Menu
34
4.11 Shortcut Key
34
4.12 Phone Settings
35
4.13 Voice Commander Settings
36
Chapter 5 ActiveSync Synchronization Tool ........................................39
5.1 Install And Use ActiveSync
39
5.2 Synchronize via Bluetooth
39
Chapter 6 Connections .........................................................................40
6.1 Internet access
40
6.2 GPRS Connection Settings
40
6.3 Activating GPRS Connection
40
6.4 GPRS Wizard
41
6.5 Connecting With Your Personal Computer
41
6.6 Bluetooth Wireless Transmissions
41
6.7 Modem Connection
41
6.8 WI-FI
42
6.9 USB
42
Chapter 7 Receive And Send Message ................................................43
7.1 E-mail and Message
43
7.2 Synchronously Process Email
43
7.3 Directly Connect to Email Server
44
7.4 Establish Email Services
44
7.5 Use Email and Message
45
7.6 How to use Push Email
46
7.7 How to use MMS
47
Chapter 8 Using Bluetooth ...................................................................50
8.1 Bluetooth Connection Settings
50
8.2 COM Ports
50
Chapter 9 Multimedia ...........................................................................52
9.1 TV
52
9.2 Radio
53
9.3 Camera
54
9.4 Video Mode
55
9.5 Recorder
56
9.6 Photo Editor
57
9.7 Pictures & Videos
57
9.8 Voice Command
57
9.9 JAVA
58
Chapter 10 Embedded Programs .........................................................59
10.1 Calendar
59
10.2 Contacts
60
10.3 Tasks
61
10.4 Notes
62
10.5 Word Mobile
63
10.6 Excel Mobile
64
10.7 PowerPoint Mobile
65
10.8 Windows Media Player
65
10.9 Internet Explorer
66
10.10 Magnifier
67
10.11 Zip
67
10.12 Calculator
68
10.13 Game
68
10.14 STK (SIM Tool Kit)
69
Chapter 11 Device Maintenance ..........................................................70
11.1 Memory Management
70
11.2 Memory
70
11.3 Add or Remove Programs
71
Chapter 12 Specifications ....................................................................73
Chapter 13 FAQ .....................................................................................75
8 9
This chapter introduces you to the hardware of the device and its function keys.
1.Power On / Off:
Press and hold the power button for a few seconds to turn on / off your device.
2.LED Indicator:
The LED Indicator indicates the status of your device by showing different colors.
Blue: Bluetooth is activated
Orange:
Wi-Fi is activated
White:
indication and alert
Green:
mobile network detected
3.Receiver:
You can hear caller’s voice through receiver.
4.Screen:
Display screen.
5.Left Function Key:
Perform Menu or program command displayed on the
down-left corner of the screen.
6.Call Key:
You can make or answer a call by pressing call
key.
7.Windows Flag Key(Flag Key):
Press the flag key to open “ Start ” menu options.
8.Right Function Key:
Perform the function of menu or program command displayed on the down-right corner
screen.
9.End Key:
Press this key to end a call.
10.OK Key:
Press this key to execute or terminate a selected function or application.
11.Navigation Key:
Use up, down, left and right directions to navigate. Press the center key to execute the
selected function or application.
12.Microphone:
Receive your voice and conversation.
13.Mini USB1.1 / Charging Slot:
Connect a charger adaptor to this slot to start charging. This slot is also a USB slot. You
may connect the device to computers or other devices with USB cable and transfer files
between the device and that device.
14.TV / FM Antenna Headset plug:
You can watch TV on the device or listen to FM radio and music via antenna headset.
15.Mini SD Card Slot:
You can insert your Mini SD card here to save data in your card.
16.Reset Button:
Press the reset button to reboot your device.
17.Camera Key:
Press and hold camera key to launch camera function.
18.Volume Key
Slide this key upwards or downwards to adjust volume.
Press this key to launch Voice Commander.
19. Loudspeaker:
You may play music / voice through speaker.
20.Flash:
10
11
Support Auto Flash / Forced Flash On / Forced Flash Off mode.
21.Stylus :
Use the stylus to touch the screen panel.
22.Battery Lock:
Pull down the battery lock to remove a battery or to
install a SIM card.
23.Battery
24.Camera Lens:
Capture a photo or film a video through this lens.
25.Macro Mode Switch
Key Function
5-Way Navigation Key - Up Move cursor up
5-Way Navigation Key - Down
Move cursor down
5-Way Navigation Key - Left Move cursor to the left
5-Way Navigation Key - Right Move cursor to the right
5-Way Navigation Key - Center
Execution
Call key Press: enter phone function.
End Key Press: return to Today screen.
Power On / Off
Press: power saving mode
Press and hold: power off Press: power saving mode
Press and hold: power off
Flag Key Press: Display/hide the “Start” menu.
Press and hold: Display the Easy-Touch Menu.
OK Key Press: execute the function of the top-right screen
(OK or X)
Press and hold: switch screen display to portrait/
landscape.
Left Function Key On Today screen, press to view Call history.Press and
hold to launch Windows Media Player.
Right Function Key On Today screen, press to view Contacts. Press and
hold to enter File Manager.
Camera Key Press and hold : Camera mode
Volume Key Slide up: increase volume.
Slide down: decrease volume.
Press: activate voice command.
Press and hold: activate voice note.
Reset Key Reboot your device.
When using the device for the first time, please make sure the battery is installed and fully
charged.
1.Insert a battery to the battery slot.
2.Plug your charger into an outlet and plug the other end to your device. The device will
start charging automatically.
3.It takes 3 hours to fully charge your battery with a traveler charger for the first time. On
a deskstand, it takes 6-8 hours to fully charge your battery for the first time. Unplug the
device from the charger when charging is complete, and you may now use the device.
4.When the End Key flashes in white, it means the battery is charging.
5.When the End Key backlight goes out, it means the charging is complete.
6.The battery icon on task bar on Today screen shows the battery status. You may also
check the battery status in “ Start ” >
Settings
> System Tab > Battery Tab.
Note: When the device is not charged for a long period of time, or the battery power
has been completely used up, the charging process will enter a pre-charge mode which
takes around 30 minutes. During pre-charge, the LED light will light up solid and you will
not be able to turn on the device. When the LED light starts flashing again, you may turn
on the device.
Use the stylus to touch or write on your screen. Using stylus can avoid damaging your
12
13
screen. There are 2 ways to use your stylus:
1.Tap:
softly tap on a desired item by your stylus, and lift the pen from the screen.
2.Press: touch and hold your stylus on a desired item for a few seconds until a blue
dotted circle appears. This indicates that a pop up Menu is going to be activated.
When using the device for the first time, screen alignment is required. If you find that the
device does not accurately respond to your stylus taps, or you have performed a system
reset, you need to align your screen.
1.Tap ” Start ” >
Settings
> System Tab >
Screen
> General Tab.
2.Tap { Align Screen } on your screen.
3.On the align screen, use your stylus to touch the crosses on the screen accurately.
4.Tap “ OK ” to exit.
You can also choose your screen display in Portrait or Landscape.
1.Press and hold OK any time when the device is on to switch your screen display between
Portrait and Landscape.
You can also change the default screen display by following the steps below:
1.Tap“Start”>
Settings
> System Tab >
Screen
> General Tab.
2.On General Tab screen, select your desired orientation. Portrait, Landscape Right-
Handed, Landscape Left - Handed.
3.Tap “ OK ”, the screen will change accordingly.
When using the device for the first time, you are required to set your time zone, time, and
date. You can also tap on the clock icon on Today’s screen to setup time and date.
1.Tap“Start”>
Settings
> System Tab >
Clock & Alarms
> Time Tab.
2.Select { Home } or { Visiting }.
3.Select your time zone.
4.Select AM / PM.
5.Use the up and down arrow aside hour, minute and second to adjust the highlighted time
unit.
6.Tap the down arrow aside the date to open a calendar,and select a desired month, date,
and year.
7.Tap“ OK ”, a pop - up window will appear on your screen to confirm to “ Save Changes to
the clock settings ”.
8.Tap “ Yes ” to save the changes, and exit.
Press Power On / Off key on the top of the device to turn on the device.
Sleep Mode
1.Sleep Mode is a power saving mode designed to reserve battery power. After idling for a
period of time, the device automatically enters Sleep Mode. You may also manually enter
Sleep mode by pressing power On / Off key shortly. The backlight of the screen will turn
off and the device will go into Sleep mode. When in Sleep mode, your device will show no
response to any operation or touches on the screen and keypad.
2.Press the power On / Off key again to exit Sleep mode.
3.You may set the time to activate Sleep mode. The device will automatically enter Sleep
mode when no operation is done within that time.
˙
Tap “ Start ” >
Settings
> System Tab >
Power
> Advanced Tab.
˙
Check Turn off device if not used for Please select“ On battery power” or On
external power”.
˙
Select your desired time period.
˙
Tap“OK”to complete this setting.
Power Off
To turn off the device, press and hold Power On / Off Key on the top of the device for about
5 seconds while the power is on.
14
15
You can input your personal information to the device in Owner Information.
1.Tap “ Start ” >
Settings
> Personal Tab >
Owner Information
> Identification Tab.
2.Tap on “
Name ” field and input your name.
3.Tap on a desired input field and input your information.
4.Tap on the
Notes tab to input other information you would like to display on your device.
5.If you want your information to be displayed on the starting screen, tap on the
Options
tab, and check both “ Identification Information ”and “ Note ”.
6.Select “ OK ” to finish setup and save it.
You can set your own password to prevent unauthorized use of your device.
1.Tap “ Start ” >
Settings
> Personal Tab >
Lock
> Password Tab.
2.On Password tab screen, check “ Prompt if device unused for ”.
3.Select an appropriate time.
4.Select a password type in “ Password Type ” field.
5.Input your password in the “ Password ” field and reconfirm the password in “ Confirm”.
6.Tap OK ”, a pop - up window will appear to confirm Do you want to save password
settings changes?”.
7.Tap “ Yes ” to finish settings and save the changes; “ No ” to cancel.
8.You may also input password hint message under the Hint tab screen.
9.Tap “ OK ” to save your inputs.
Note: If you forget your password, you need to perform system default, which will lose
all your data and settings.
On Today screen, tap { Device unlocked } to lock your device. When the device is
locked, the device will not respond to touches on screen nor will it react to any input on the
keypad.You can enable device lock after entering Sleep mode by pressing the power key.
To enable this setting, please follow the steps below:
˙Tap “ Start ” > [Programs] > Phone Applications > Settings Tab.
˙Check “Lock device when in sleep mode”.
Unlock device:
1.Tap { Unlock } on the bottom left of the screen, or press the left function key.
2.Tap the { Unlock } button on the newly appeared screen and the device is unlocked.
Reboot System:
When you reboot the device, all running programs will stop and you will lose all unsaved
information. Please make sure that all information has been saved before performing
system reboot.
1.Reset key is located on the bottom right side of your device.
2.Use the stylus to softly poke the reset key on the lower right side of the device to reboot
your system.
System Reset:
When executing system reset, you are performing a clean boot on the device. It will remove
the programs you have installed on this device, and reset all settings and information back
to factory defaults.
1.Turn off the device.
2.Press the Flag key and OK key at the same time, and press Power key while still holding
Flag key and OK key.
3.This device will restore to system defaults and reboot.
To avoid damaging your device screen and camera lens, please do not drop, smash, or
place pressure on the device.
16 17
To maintain the device in the best condition, please follow the suggestions below:
1.Please avoid exposing your device to extreme environment (too hot / too old / high
humidity).
2.Please keep the device away from rain and water.
3.Please keep the device away from direct exposure to the sun and ultraviolet rays.
4.Place the device in the case when you are not using it.
Please follow the suggestions below when you are traveling with the device:
1. Back up your data.
2.Copy your data in a mini SD card.
4.Remove all other connected device.
5.Bring your charger.
6.Place your the device in the case.
7.If you are in an air plane, please make sure that you have turned your device into the
flight mode.
8.Make sure you have brought a specific adapter for the country you are traveling.
1.Start Menu : Tap to open the start menu list.
2.Battery Status :
Shows the current battery status.
3.Connection Status : Shows the connection status of
the device.
4.SIM Card Status : Shows SIM card status.
5.Volume : Tap to adjust the speaker or phone volume.
6.Time : Shows time and the latest appointment.
7.Today Screen : Shows all important information of
today.
8.Call History : Tap to enter Call History.
9.Contacts : Tap to view your Contacts.
Icon Description
All sound alerts are on.
Sound alerts off.
No SIM card.
Main battery power is full.
Low Battery. Please recharge.
Charging.
You have one or more MSN messages.
You have one or more email, messages, or voicemail messages.
Magnifier is running in the background.
Recorder is recording.
You have new messages in answer machine.
Headset is plugged in.
You have missed calls.
18
19
Tap this icon to reveal all status icons.
Mobile phone is off (Flight mode).
Mobile phone is on.
GPRS is available.
GPRS is disconnected.
GPRS is connected.
Bluetooth is activated.
1.The applications in this block are fixed for some Microsoft applications.
2.The applications in this block are the last 5 programs that you have used.
3.Tap on Programs, to enter the programs screen.
4.Tap on
Settings, to enter the settings screen.
5.Tap on
Help, to see detail information about your device.
You will see many application icons on your Programs screen. From the Programs
screen, you may touch on the application icon that you desired to use to execute the
application.
Icon Program Description
Multimedia
Camera
,
FM Radio
,
Photo Editor
Pictures & Videos
,
Recorder
,
TV
,
Voice Command
,
JAVA
Tools
Magnifier
,
Zip
,
Easy-Touch Menu
,
Pocket Ghost
Phone Manager
Block List
,
Modem Link
,
SIM Contacts
,
Download Agent
Games
Bubble Breaker
,
Solitaire
ActiveSync
Transmit data between your computer and the
device.
Pocket MSN
Perform MSN functions.
Excel Mobile
Execute Excel files.
PowerPoint Mobile
Execute PowerPoint files.
Word Mobile
Execute Word files.
Calculator
Perform basic calculations.
Notes
Write notes, memo, or drawings.
Search
Search for all data, programs, and files.
Terminal Services Client
Setup your server information.
Learn about what you can do with Settings:
Select “ Start ” >
Settings
> Personal Tab
Program Description
Buttons You may assign programs to hard keys.
20
21
Handset Applications
Activate/deactivate Answering Machine, Background Effects, and
Phone Recorder, and related phone settings.
Input You can set your preferred input method.
Lock You may set a personal password for the device.
Menus Select the programs to be displayed in Start menu.
MSN Options You may set MSN password, account, and other details.
Owner Information You may input your personal information.
Phone Settings for phone functions.
Shutdown Animation Settings for shutdown screen.
Sounds & Notifications Settings for alarm sound and notification.
Today
Settings for screen appearance and display items.
Select “ Start ” >
Settings
> System Tab
Program Description
About Contains information of the device.
Backlight Settings for backlight.
Certificates
Identifies the device to others to prevent unauthorized
access.
Clock & Alarms Settings for time and alarms.
GPS Settings for using GPS function.
Memory Memory status and running programs.
Power Power status and wireless signals.
Regional Settings Settings for region, number, currency, time, and date.
Remove Programs Remove programs from your device.
Screen Screen orientation, screen alignment, and text size.
TV You may set your region and channel range.
Voice Commander Settings
Settings for voice command. You may record voice tags
here.
Select “ Start ” >
Settings
> Connections Tab
Program Description
Beam You can choose to receive all incoming beams.
Bluetooth Settings for Bluetooth function.
Connections Settings and management for modem connections.
GPRS Wizard Basic settings for GPRS connection.
Network Cards Configurations for network adapters.
USB Use the device as a mini SD card reader.
Wireless Manager Turn on/off Bluetooth, flight mode.
Screen Keyboard
You can input data by using screen keyboard. Tap on the keyboard icon on your screen
to open the screen keyboard. Follow the following steps below to input your data:
1.On your screen keyboard, tap
Shift
or
CAP
key to input a Capitalized letter or
some common symbols. You can also double-tap on
Shift
to enter capital letters.
2.Tap the
key on your screen keyboard to delete.
3.To close the screen keyboard, tap the keyboard icon again on your screen to hide the
screen keyboard.
Letter Recognizer
1.On your screen keyboard, tap the arrow icon next to the keyboard icon for more input
methods. On the pop-up list, tap Letter Recognizer.
2.Write letters and numbers in a corresponding field on your Letter Recognizer screen. The
device will display the letters / numbers that you had just input in the Letter Recognizer
fields.
3.Tap the
key to delete an input.
Block Recognizer
1.On your screen keyboard, tap the arrow icon next to the keyboard icon for more input
methods. On the pop - up list, tap Block Recognizer.
2.Write letters and numbers in a corresponding field, the system will display the letters/
numbers identified of your handwriting.
3.Do not write letters / numbers continually to prevent recognition error.
4.Do not write letters outside of the input fields.
Transcriber
1.On your screen keyboard, tap the arrow icon next to the keyboard icon for more input
methods. On the pop-up list, tap Transcriber.
2.Position the cursor where you want text to appear.
22 23
3.Use the stylus to write anywhere on the screen. The handwriting will be converted to text
after you lift the stylus from the screen.
Press key, or select “ Start ” >
Phone
to enter phone function. Please insert a SIM
card before using phone.
1.Before inserting / removing a SIM card, please make sure that the device is turned off
and is not connected to any power supply by the USB cable or charger.
2.Remove the battery from the battery slot.
3.Insert / Remove the SIM card from the SIM card slot.
4.Replace the battery back to the battery slot.
1.After entering the phone function, you can dial a number using the dial keypad or the
keypad on your screen.
2.To delete an error input, use
key on your screen.
3. Press Key to make a call.
4. Press Key to end the call.
Speed Dial
You can set ten phone numbers in your speed dial list.
1.After entering phone function, press Menu > Speed Dial to enter your Speed Dial List.
2.On your Speed Dial List screen, you can select a contact on your list to see the contact’s
detailed information.
3.On Speed Dial List screen, tap {Menu} on the bottom right corner of the screen. You can
perform {New}, {Edit}, or {Delete} contacts on your Speed Dial List.
4.To make a call, press the corresponding number on your keypad to call the contact on
your speed dial list.
5.You can also use the navigation key to select a contact you want to call on the speed dial
screen, and then press Call Key to call.
6.Press End Key to end the call.
Smart Dial
24
25
Use this function to search a contact or a specific number quickly.
1.Press Call key to enter Phone, and then tap Menu > Smart Dial.
2.The smart dial screen will display all contacts in this device .
3.After inputting the first number/letter, the smart dial screen will display only the matching
phone number and contacts on the screen. For example: after inputting 0, the smart dial
screen will only display phone numbers which begins with 0.
4.When there is an input error, press the right navigation key to delete.
5.Select a number or contact you want to call, press Key to call.
6.Press Key to end the call.
Option Operation Answer Or Hang Up H e a d s e t Vo l u m e
Adjustment
Using Handheld Call Pla ce th e ha ndse t
close to your ear and
the microphone close
to your mouth.
P r e s s
K e y t o
answer, and pr ess
Key to hang up.
You may adjust the
v o lum e us i n g t h e
volum e ke y a t th e
side of this device
during a call.
Using Headset Place the h ead set
into your ears and
aim the microphone
at your mouth.
P r ess th e ke y o n
headset to answer or
hang up.
You may adjust the
v o lum e us i n g t h e
volum e ke y a t th e
side of this device
during a call.
Tap the icon on screen and the volume adjustment window will appear. Adjust the
volume of alert tone for all programs tapping on
, and adjust the ring volume by tapping
on .
1.Press the volume adjustment key on the side manually or tap >
to adjust incoming
call volume.
2.If you press the volume adjustment key on the side of this device or tap
> icons
during a call, you may adjust the in - call volume of the phone. You can only adjust it when
during a call.
3.When you select
Vibrate
, the icon will change to icon.
4.When you select
Off
, the icon on screen will change to icon.
Under phone function screen,tap { Contacts } on the bottom left of the screen to enter
Contacts.
1.Enter the contact or phone number you intend to search into the search field, the device
will search for the contacts that match this condition.
2.Push and hold the 5 way navigation key upwards or
downwards to browse contacts by initial letters in Contacts.
(This function is available for contacts synchronized from
Outlook only.)
3.Tap on any contact to view that contact’s information.
4.Under contacts list screen, tap { Call } on the bottom left
of screen or press the left function key to make a call to that
person.
5.Under contacts list screen, tap { Menu } on the bottom right
of screen for more options.
If you would like to make a call using telephone, go to
Contacts and highlight the person you would like to make a call to. Tap Menu > Sounds
DTMF; then aim the device to the telephone receiver. Your telephone will dial out to the
desired contact upon reception of the DTMF sounds from the device.
Note: You may choose to display contacts in your SIM card by tapping { Menu } >
Show SIM Data ”. The SIM contacts are indicated by a SIM card icon on the right side of
the contacts. (See also 3.9 Copy SIM Card Contacts.)
In Contacts, Tap { New } on the bottom left of screen. A blank record will appear.
26
27
1.You may set photos in photo field for this contact, by which the contact’s photo will
display as an incoming call photo ID.
2.You may also tap ringtone field to set different incoming call ringtones for your contacts.
3.Tap“OK”on the upper right screen to save the new contact and exit.
Call History contains all outbound calls, incoming calls and missed calls. You may choose
to display all or only display highlighted items.
1.Under Today screen, tap {Call History} on bottom left of
screen.
2.Tap {Menu} on the bottom right of screen.
3.Select a desired function to perform. You may change
call history display method by selecting {Filter}; or select
{Call Timers} to check incoming call numbers, call time and
manage incoming call history.
4.Under {Call History} screen, select the icon on the upper
left side of main screen to redial this number at once.
5.Under {Call History} screen, tap and hold on a phone
number to open drop down menu for more options.
Tap Phone in { Start } menu, then select { Menu } on the bottom left of the screen. Select {
Options } > Phone tab from unfolded options.
1.You may select preferred ringer method.
2. f you want to download ringtones, please use ActiveSync program in computer and copy
the ringtone file to Application Data / Sounds folder in this device. The ringtone files
will be added as the options.
3.You can set keypad tone for dialing.
4.You can set personal password to prevent unauthorized use from others.
Use this function to copy the contacts in SIM card to this device.
1.Select “ Start ” >
Programs
>
Phone Manager
>
SIM Card Contacts
.
2.All contacts in SIM card will show on the screen.
3.Select { Copy Now }, and your new contacts in SIM card will be copied to “ Contacts ” in
this device.
4.Select “ X ” to exit without copying SIM card data to the device.
To sent a text message, select Messaging on Today screen to enter message function
screen; or tap ” Start ” > Messaging.
1.Select “ Inbox ” on upper left screen, and then select files from message categories.
2.Select “ Text Message ” folder.
3.Select { New } on the bottom left of screen to create a new text message.
4.Input the phone number of recipient into recipient field, or select a recipient from { Menu
} > { Add Recipient } on the bottom right corner of screen.
5.Input your message into content filed.
6.Tap OK on the top right of screen. You may select whether to save this message
in draft and send it out later, or directly tap { Send } on the bottom left of screen to send
message.
You can choose to block specific numbers or block all unknown calls. When a blocked
number calls, the screen will display incoming call alert and ring but will automatically hang
up within 5 seconds.
Select “ Start ” >
Programs
>
Phone Manager
>
Block List
1.Check Block all unknown calls ” or tap { Menu } and select { Add Block List } to add a
number you would like to block.
28 29
2.Select “ OK ” to save the settings.
Alternatively, tap { Contacts} on Today screen, highlight the contact you would like to block
and tap { Menu }. Select Set to Block List ”. You may also block numbers in Call History,
or create new blocked numbers in Block List.
You may set your personalized settings by preference.
Press and hold Flag key for about 3 seconds, and then release, to open Easy-Touch Menu.
You can easily close programs, adjust backlight brightness, or apply profiles.
You can create backup of your personal settings and data, and restore the data later.
1. “Start” > Programs > Tools > Pocket Ghost.
2. Select Pocket Ghost, then select Create Backupto create system backup. Select
“Restore image” to restore the settings and data. When you select to create a backup or
restore an image, the device will need to reboot.
1.Select “ Start ” >
Settings
> Personal Tab >
Shutdown Animation
2.Select your preferred Animation File, Sound File, Show Time. Tap User Define in
Animation File ” to set your own file as shutdown animation.
3.Select “ Preview ” to view your settings.
4.Tap “ OK ” to save and exit.
Handset Applications contains additional handset related settings.
1.Tap “ Start ” >
Settings
> Personal Tab >
Handset Applications
2.Answer Machine Tab: You may enable / disable Answer Machine, choose file location,
set recording time, set hold on time before activating answer machine, or set your own
greeting.
3.Background Effects Tab: You may enable / disable Background Effect, choose preferred
background effect sound, or adjust volume.
30
31
4.Phone Record Tab: You may turn on / off phone recording, or choose a file location.
5. Settings Tab: You may change phone related settings.
Note: When Answer Machine is activated, Background effects and Phone Recorder will
not operate.
Answer Machine
This function is different from voicemail, you may use answer machine in this device to
directly save caller’s message to this device, which allows you to listen to message more
easily and also save call expenses.You can even choose to apply a specific greeting to an
incoming call by tapping the icon appeared when an incoming call is ringing.
Select “ Start ” >
Settings
> Personal Tab >
Handset Applications
> Answer Machine
tab.
1.Check“Enable Answer Machine”to activate answer machine function.
2.Select“Save In”to select a storage location for messages.
3.Select“Recording Time”to set the time length for a caller message.
4.Select“Activate Time”to set how many seconds that your answer machine will wait before
answering an incoming call.
5. Select a greeting from {Greeting setup} to apply on incoming calls. To apply your own
recordings as the greeting, select “User Define” from the pull down menu.
6.Tap “ OK ” to save setup and return to System tab screen.
You will find callers’ messages in “ My Answer Machine ” folder.
Greeting Setup:
Tap { Greeting Setup } to set default answer machine greeting or record your own greeting.
Press the play button to listen to the current greeting.
1.Select a style to be your greeting message.
2.Tap the record button to record your own greeting.
3.Tap the play button to listen to greeting recorded.
4.Tap “ OK ” to validate the settings and exit.
Note:
1.Your answer machine will stop recording as caller ends the call. After activating answer
machine, you may press { Stop } to stop recording without interrupting the conversation.
After activating answer machine, it will interrupt conversation and end recording by
pressing Key.
2.When Caller 1 is leaving a message, the incoming call from Caller 2 will become call
waiting and will be recorded in the message of Caller 1.You may select to answer or
reject call waiting. If you select to answer call waiting,the message of Caller 1 will stop;
if you select to reject call waiting, the call waiting from Caller 2 will continue to ring until
Caller 2 enters voice mail.
3.If you have checked “ Auto Answer in Phone, Answer Machine will automatically be
deactivated. See Settings in this Chapter. .
Background Effects
You may use background effects to create the call environment you desire.
1.Select Start >
Settings
> Personal tab >
Handset Applications
>Background
Effects tab.
2.Check “ Enable Overdub ” to activate background mixed sound function.
3.Tap { Background sound } to unfold special sound effect and select a special effect.
4.You may use { Background sound volume } bar on screen to adjust the volume of special
effect.
5.Press “ OK ” to validate the settings and exit.
You may also use the files you have recorded as background effects. To do so, save the
files under My Background Sounds in My Documents, then repeat step 1 to 5.
After activating background effects, when an incoming call rings, tap { Answer } to answer
with the background sound you have selected, or tap on the
icon and choose Off
from the drop down menu to answer without the background sound.You can also tap
the
icon and choose a different background sound from the drop down menu to be
applied to this particular call.Once you select the sound to be applied, it will automatically
answer the phone and apply the newly selected special effect to that call.
Phone Recording
You may use phone recording function to record your call contents.
1.Select “ Start >
Settings
> Personal tab >
Handset Applications
> Phone Record
32
33
tab.
2.Check “ Activate Phone Recording ” to activate phone recording function.
3.Select “ Save In ” to select the storage location for your phone recording.
4.Press “ OK ” to validate the settings and exit.
You may find the recorded files in “ My Phone Recording ” folder.
When phone recording is activated, press Camera key to start in - call recording. Pressing
Camera key again will cancel the recording. By the end of a call or by pressing stop
recording key, the recording function will stop. During recording, the device will vibrate to
indicate that the recording has started/stopped.
Note: If Background Effects is activated, the background special effect will be recorded
during phone recording.
Settings:
Select “ Start ” >
Settings
> Personal tab >
Phone
> Settings.
- Auto Answer: The phone will automatically pick up incoming calls by the time period you
defined.
- Play individual ringtone on Call-waiting: Play callers ring tone during call-waiting to help
you recognize the incoming caller.
- Turn off touch screen during call to save power when hands-free is not in use: Temporarily
turn off touch screen when you are in a call and are not in hands-free mode.
- Lock device when in sleep mode: When the device enters Sleep mode, it will
automatically enable device lock.
Select “ Start ” >
Settings
> and select Personal or System tab on the bottom of screen.
You may change the following settings:
˙
“ Clock & Alarms ” : change time or set alarm.
˙
“ Menus ” : personalize your Start menu by selecting the items to be shown in the menu..
˙
“ My Information ” : input your contact information.
˙
“ Password ” : restrict access to your data.
˙
“ Power ” : extend battery lifetime.
˙
“ Today ” : personalize “T oday Screen ” appearance and information. When you change
your Today theme in Today > Theme tab, your Today background, phone skin, and theme
color, will all change accordingly.
If you have already scheduled appointments in Calendar, job deadlines in Task bar, or
alarm setup in Clock & Alarms, then this device will alert you according to your settings.
You may select the following alert methods:
˙
Display message dialog on screen
˙
Play specified sound
˙
Flashing
˙
Vibration
If you want to select alert types and sounds, select “ Start ” >
Settings
> Personal tab >
Sounds & Notifications
> Notifications tab.
Select “ Star t” >
Settings
> System tab >
Power
Battery tab:
displays the power status.
Advanced tab: enable auto power off of the device.
Others tab:
enable / disable short press power key to lock device, USB fast charging.
Note: USB fast charging through PC will speed up the charging process and shortens
the time needed. However, it may cause system instability to some notebooks.
1. Select “ Start ” >
Settings
> System tab >
Backlight
to set backlight functions.
2. Battery Power tab: set the turn on method and turn off time for backlight when using
34
35
battery power.
3. External Power tab: set the turn on method and turn off time for backlight when using
external power.
4. Extended tab: adjust the brightness of backlight.
“ Search ” function may help you to rapidly find the information you desire.
1. Select “ Start ” >
Programs
>
Search
2. Input the text you want to search in search field.
3. You may also select proper file type in type field to search the file you want.
4. Tap { Search } on the bottom left of screen to start searching the file.
You may also use
File Explorer
to search for files.
1. Select “ Start ” >
File Explorer
2. Select the arrow on the top left corner of the screen to change a folder.
3. Select “Date” to change the order of file display.
4. Select a folder to view the files in that folder.
5. Tap and hold a file or on any blank space of the screen to open pop - up Menu.
To move les using
File Explorer
, select and hold the items you want to move, then
select { Cut } or { Copy } from Menu and then select { Paste } after switching to proper
directory.
Through pop - up Menu, you may easily select a desired item for execution. The pop-up
Menu provided in each program is different. Tap and hold and then lift the stylus to open a
pop - up Menu. Select an item from the Menu to execute. If you do not want to execute any
item, tap anywhere outside the Menu to cancel.
You may set certain keys as the activation keys for your most common used programs.
1. Select “ Start ” >
Settings
> Personal tab >
Buttons
> Program Buttons tab.
2. Under Program Buttons tab screen, select desired function key.
3. In specified program field, select the program you want to set.
4. Tap “ OK ” to save and return to Personal
tab screen.
Default assignments are:
Left Function Key (Press & hold): Windows Media Player.
Right Function Key (Press & hold): File Manager.
Flag Key (Press & hold): Easy-Touch Menu.
Volume Side Key (Press & hold): Voice Note.
OK Key (Press & hold): Landscape/Portrait display.
You may make settings for Phone, Services, Network and other phone related settings.
Select “ Start ” >
Settings
> Personal tab >
Phone
Phone
tab: Settings include ring type, ring tone, keypad tone and security PIN.
Services
tab: Settings include Call Barring, Caller ID, Call Forwarding, Call waiting,
Voice Mail and Text Messages, and Fixed Dialing.
Network
tab: Settings include current network, preferred networks, and network
selection.
Information
tab: This tab provides device related phone information.
Services:
1.Select “ Start ” >
Settings
> Personal tab >
Phone
> Services tab.
2.Check the items you want to select.
3.Tap “ OK ” to save settings and return to Personal tab screen.
36
37
Note: All services in Services are provided by operators. Please contact your
operator for enquiries regarding these services.
Network:
Select “ Start ” >
Settings
> Personal tab >
Phone
> Network
˙
Under
Current network
,tap Find Network to automatically search for the network
in use.
˙
Under
Network Selection
, select Automatic or Manual to select network
automatically or manually.
˙
Under
Preferred networks
, tap Set Networks to set your preferred order of
network.
You may record voice tags under Voice Commander Settings, or train you the way of
number speaking under “ Digit Training ” and set the length and sensibility of dial number.
Contacts
tab:
1.Select Start >
Settings
> System tab >
Voice Commander Settings
> Contacts
tab.
2.Select a contact from contacts list.
3.Press key to play system pronunciation method.
4.Press voice tag to record your own pronunciation method.
5.Press delete key to delete voice tag.
Application
tab:
1.Select “ Start ” >
Settings
> System tab >
Voice Commander Settings
> Application
tab.
2.Select an application from applications list.
3.Press key to play system pronunciation method.
4.Press voice tag to record your own pronunciation method.
5.Press delete key to delete voice tag.
Music
tab:
If you have MP3 files in the device or mini SD card, you may record voice tags for these
MP3 files.
1.Select “ Start ” >
Settings
> System tab >
Voice Commander Settings
>Music tab.
2.Select an application from applications list.
3.Press key to play system pronunciation method.
4.Press voice tag to record your own pronunciation method.
5.Press delete key to delete voice tag.
Digit Training
tab:
1.Select Start >
Settings
> System tab >
Voice Commander Settings
>Digit
Training tab.
2.Press record key and say the numbers next to the red arrow.
3.After recording a series of numbers, system will play the newly recorded part and ask
you whether it is correct.
4.After confirming its correctness, system will continuously train remaining number model.
5.Check Use adapted model and the system will apply the voice tags you have recorded
as voice identification standard in the future.
Advanced Settings
tab:
1.Select “ Start ” >
Settings
> System tab >
Voice Commander Settings
> Advanced
Settings tab.
2.Select the desired sensitivity.
3.Select the length of phone number.
Press ” OK ” to save Settings and return to System tab screen.
You may use Microsoft ActiveSync to synchronize data in this device with personal
computer.
˙
You can synchronously update Outlook data in this device and in your personal
computer.
˙
You can synchronize Microsoft Word and Microsoft Excel files in this device and in your
personal computer. The files will automatically convert to the compatible version.
The default of ActiveSync is not to automatically synchronize all data. If you would like to
change the default, you may activate or disable the synchronization function for specific
38 39
data in ActiveSync Option.
ActiveSync may also be used for the following purposes:
˙
Backup or restore saved data in this device.
˙
Copy files between this device and personal computer.
˙
Synchronize while connecting to your personal computer or selecting synchronization
command.
˙
Synchronize specific types and range of files. For example, you may choose to
synchronize appointments of the past few weeks.
Note: Before installing ActiveSync, do not connect your device to the computer. You
may only connect the device to the computer by using the USB cable AFTER ActiveSync
is installed.
1.ActiveSync Installation:
use the enclosed CD to install Microsoft ActiveSync in your personal computer. This device
already has built-in ActiveSync.
2.Hardware Installation:
connect this device with your personal computer by using the USB cable.
3.Use ActiveSync Program:
After completing installation, setup wizard will lead you step by step. Please follow the
instructions to make setup basing on your demand.
After connecting this device with your personal computer by using the USB cable,the
computer screen will display Connected upon successful connection.A green icon
representing “ connected ” will appear on the task bar of your computer screen.
Select the Browse button of ActiveSync program of your personal computer, to view the
files in this device. You may manage several files in the device simultaneously.
Instead of using a USB cable, you may also synchronize data via Bluetooth.Select Start
”>
Programs
>
ActiveSync
> {Menu},then select { Connect via Bluetooth } and
tap Synchronize in this device to process synchronization. For descriptions regarding
synchronization through Bluetooth device, please refer to Synchronizing Your Information
> Connect to a PC via Bluetooth in device Help.
40 41
When using GPRS and Internet connection, you will not be able to answer a call. If you
want to make a call, your device will automatically disconnect to the Internet and reconnect
to the Internet at the end of conversation.
Before using GPRS to connect to the Internet, please confirm with your system provider
whether this service is enabled and supported on your SIM card. If you already have a
SIM card, then you only need to apply to your system provider for GPRS function. It is
convenient for you to work at home or travel by using GPRS. You can use this device to
browse web pages, read or send Email, text or MMS messages, and MSN messages
through wireless network.
1.Select “ Start ” >
Settings
> Connections tab >
Connections
> Advanced tab.
2.Select {Select Networks} to open Network Management screen.
3.Select a desired network name from the list; press { New } to add available network to
list; press { Edit } to modify original network setup content.
4.Tap “ OK ” to save and exit.
If this device is under flight mode, please turn off flight mode beforehand.
Tap
icon on Today screen, then tap “ Wireless Manager ” on the pop - up window. Tap
on “ Phone ” to turn the phone function on. The
icon will appear on Today screen when
GPRS is activated.
1.Tap “ Start ” >
Internet Explorer
.
2.Input an URL address you desire to browse in address field and tap the arrow icon to go
to the URL.
3.After completing connection, icon will become icon.
4.Or you may select Start >
Settings
> Connections tab >
Connections
> Tasks
tab > Manage Existing Connection > tap and hold on a connection to open pop-up Menu >
Connections.
After completing connection, you may go Internet surfing or send and receive email.
GPRS Wizard helps you to manually select your GPRS network with more ease.
1.Tap “ Start ” >
Settings
> Connections tab >
GPRS Wizard
2.Choose the regional name of your location.
3.Choose the desirable network, or tap “ Add ” to add new networks.
4.Tap “ OK ” to save the changes and exit.
If you want to connect this device with your personal computer, please see “Chapter 5
ActiveSync Synchronization Tool”.
If you want to use Bluetooth function connection in this device, please see Chapter “Using
Bluetooth”.
1.Connect the device to your computer with the USB cable. Please make sure that the
phone has a GPRS enabled SIM card inside.
2.Select “ Start ” >
Programs
>
Phone Manager
>
Modem Link
,select { Activate }
3.After activating phone modem,please create a new modem on your computer.(Start >
Settings > Networks and Dial-up Connections)
4.When you create a new modem, you need to enter the following command:
AT+CGDCONT=1,“IP”, “APN field”,””,0,0 in “Properties”>“Advanced”.In this command,the
values of your APN field location are defined by your mobile service provider.
42 43
5.To deactivate modem, please follow step 2 and select “Deactivate”.
Wi-Fi allows this device to connect with detected network through WI-FI.
1. Select “ Start ” >
Settings
> Connections tab > Wireless Manager.
2. Tap {Wi-Fi}.
3. Tap“OK”to activate wireless network and exit.
After activating WI-FI, a new window, “ New Network Detected ”, will appear. Select
Connect and enter your password to the local network.Press Connect to connect this
device with local network.
Note:
Reboot is required when you change the IP address in “ Start ”> Settings
> Connections
Tab > Network Cards > Network Adaptors Tab > IP Address.
You may use the device as a mass storage device or a Mini SD card reader.
1. On the device, select “Start”>
Settings
> Connections tab >
USB
2. Tap “SD Card Reader”, and then press “Change”.
3. Connect the device to the computer with USB cable.
4. Your PC will automatically detect the new hardware. Now you can view or
transfer files to and from your mini SD card.
Before receiving and sending your email or message, please make sure that this device
has connected to a network.
When you are connected to a network, you may go to
Messaging
to receive and send
your email or message.
You may:
1.Use this device to directly connect with email server and receive or send letter.
2.Synchronously update the Microsoft Outlook or Microsoft Exchange Server email in this
device and personal computer.
The synchronization function of inbox does not support Microsoft Outlook Express.
For more information on Email:
1.See “ Establish Email Service ”.
2.See “ Use Email and Message ”.
For more information on Short Message Service (SMS):
1.Set your mobile phone message center number: select Start >
Messaging
> {
Menu } > Tools > Options > Accounts tab.
2.See “ Use Email and Message ” unit.
For receiving and sending text messages (SMS), you only need to ensure that the
phone function is activated the satellite icon on the top of outline bar shows
. It is not
necessary to activate GPRS connection nor establish new email account and connection
in Messaging.
For MMS (Multimedia Message Service), pleaser read “7.6 How to use MMS”.
If you want to synchronously process email, you must activate the “ Inbox ” synchronization
function in ActiveSync beforehand. For more information on Inbox synchronization,
please see the online Help of ActiveSync in your computer.
Inbox Synchronization Process Rules:
1.See 6.1 Internet Access ”. Please select a desired cooperation relationship on New
Cooperation Relationship screen in computer to synchronously transmit information.
44
45
If you select not to perform synchronization, you may manually copy or move email
messages between this device and the computer.
2.Only the mail in “ Inbox ” of your computer will be synchronized.
3.Only the mail in Exchange or Outlook can be synchronized.
4.The mail from “ Outbox ” folder in this device will be sent to your computer first, and then
it will be delivered through Microsoft Exchange Server or Microsoft Outlook.
5.If a specific letter is deleted in this device, then it will also be deleted in your computer
when you reconnect this device with computer.
6.SMS in this device will not be synchronized.
You may directly receive new email from email server without connecting to a computer.
You may select to use it online or offline; if it is online,you may directly read and reply
mail when this device is connected to email server. You can reply a mail directly by simply
tapping “ Send ”.
You may select to disconnect to the internet after downloading only the subjects of new
messages or partial messages and decide whether to download the full message later.
When you reconnect next time, the Inbox will download in accordance to appointed
methods, and send out unsent email in Outbox.
You may choose to read just the mail within the last few days, mail subjects only, or
complete mail. You can also choose to receive only the attachments less than specific file
size. To make these settings, select Messaging > { Menu } > Tools > Options, and change
email account setup by requirement.
If you have email accounts from ISP or company network, you may use
Messaging
to receive or send email. Please refer to the following instructions to set up a new email
account in
Messaging
of this device.
1.Please acquire the following information from ISP or company network administrator:
˙
Email address, user name and password.
˙
POP3 or IMAP4 server name of Intranet mail
˙
SMTP server name for outgoing mail
2.Establish Email Services:
Select Messaging > { Menu } > Tool > New Account, and then follow the instructions on the
screen to set up a new email account.
3.See 6.1 Internet Access to connect this device to a network and start receiving and
sending email and messages.
4.Connect with Email Server:
Select
Messaging
> { Menu } > Send and Receive.
Select
Messaging
> { Menu } > Tool > Options > Account tab to change email account
settings.
The main functions of Messaging are stated as follows:
1.Tap “ Inbox
” on the top left corner of the screen for a folder name.
2.Tap “ Date
” on the top right corner of the screen for mail arrangement.
3.Tap and hold on a mail to open mail content.
4.Tap and hold on the mail to open pop-up menu.
5.Select { New } to create new a email or message.
6.Select the keypad icon
on the bottom center of the screen to activate or disable
screen keypad.
7.Select { Menu } to view menu.
Compose and send mail:
Select
Messaging
> “ New ”to write a new mail. After writing a new mail, select “ Send ”
on the bottom left of screen and send this new mail.
When composing a new mail,you can:
1.Tap “ To, CC, BCC ” fields to input receivers’ email addresses.
2.Tap “ Subject ” field to input a subject for your new mail
3.You may enter mail content in the empty area on the bottom half of the screen.
4.Select { Send } to start sending your mail.
5.Select the icon on the bottom center of the screen to activate or disable screen keypad.
46
47
6.Select { Menu } to open menu.
Under new mail screen, select and hold to activate related Menu.
Read and reply mail:
Select
Messaging
> { Menu }, and then select Send and Receive from { Menu } to start
sending and receiving new mail. Select “ Inbox ” on the bottom left of screen to view Inbox.
Tap on any unread mail to view its content.
When reading mail, you can:
1.Tap on a contact in “ To, CC, BCC ” fields to save this contact as a new contact.
2.Tap { Reply } to compose a reply email.
3.Select the
icon on the bottom center of the screen to activate or disable screen
keypad.
4.Select { Menu } to open menu.
On the mail content screen, select and hold to activate pop-up Menu.
With push e-mail, you can have access to new incoming e-mail in real time. This Direct
Push Technology can be enabled by the Exchange Server 2003 administrator, bringing the
latest information to you. To use push email, please turn on Wi-Fi or GPRS to connect to
the Exchange Server.
Enabling Direct Push on your PC:
1. Connect your device to the PC using USB cable.
2. On the ActiveSync pop-up window, check “Synchronize with Microsoft Exchange Server
or Personal Computer” and click on “NEXT”.
3. Enter your network login name, password, and domain name. If your server requires a
SSL encryption, please check “This server requires an encrypted (SSL) connection.” Click
on “NEXT”.
4. Check the items you would like to synchronize, for example, you may check Inbox,
Calendar, Contacts, or Tasks.
Enabling Direct Push on your device:
1. On your device, select “Start” > Programs > ActiveSync > Menu > Add server source.
2. Input the IP address of your server in “Server Address”.
3. Input your network login name, password, and domain name, and then tap “NEXT”.
4. In ActiveSync on your device, select Menu > Schedule
5. Set the Peak times to “As items arrive” and the Off-peak times sync time to “As items
arrive”. Tap “OK”.
Now you have established a cooperative relationship for the device and the Exchange
Server. The next time when you select “Start” > ActiveSync > Sync, you may synchronize
with Exchange Server using Wi-Fi or GPRS.
Once you are connected to the network, you may look up your Global Address List over
the air from your device by tapping “Contacts”. You may send an email to a contact on your
Global Address List following the same steps as sending email to a contact saved on your
device.
Note:
To be able to use direct push, you need to have an exchange server. Microsoft
Exchange Server 2003 also supports useful functions such as remote device wipe.
To find out more on the benefit and usage of Microsoft Exchange server, please visit
Microsoft’s website, http://www.microsoft.com.
Before using MMS, please go to
Messaging
> { Menu }>
MMS Settings
to setup
MMS.Please refer to “MMS Settings” for details.
Compose and Send MMS:
Select
MMS
in
Messaging
,then select { New } to write a new MMS.Tap { Send } on
the bottom left of the screen to send the message.
When composing a new message, you can:
1.Tap “ To, CC, BCC” fields to input receivers’ phone number.
2.Tap “ Subject” field to input a subject for your new message.
3.Tap “ Insert Picture / Video…” or ”Insert Audio…” to insert media attachments.
4.If the message contains more than 1 page, you may switch between pages via { Menu } > {
Slides } > { Next } or { Previous}
5.You may input text content in the empty area on the bottom half of the screen.
6.Select { Preview } in { Menu } to preview the edited message
7.Select { Send } to start sending your message.
48
49
8.Select { Menu } to open menu.
In { Menu }, you may insert voice and video clip, add page, and change background color
of MMS.
Read and Reply Messages:
Select Messaging > { Menu } > Inbox to view all received MMS messages.Select { Menu } > {
Send / Receive } to receive new MMS.Select any unread mail in Inbox to view content.
When reading MMS, you can:
1.Select {Reply} to reply to this MMS.
2.Select {Menu} to open menu.
3.If you would like to save the attached multimedia files in MMS, select { Menu } > { Save
Media}
Tap and hold on a message in Inbox to open pop-up menu.
Switch Accounts
You may switch MMS to SMS or Outlook mailbox by selecting Start > Messaging >
MMS > { Menu } > { Switch Accounts }.
MMS Settings
Select “ Start ” >
Messaging
> MMS > { Menu }> “ MMS Settings ”.
You can:
1.Select your system provider.
2.If you want to change your system provider, tap { Change }.
3.Select your preferred sending and receiving method.
4.Set MMS message file size.
5.Set MMS message categories in Advanced tab.
6.Press “ OK ” to save Settings and exit.
Other settings:
You may manage folders and add new accounts in “ Start ”
Messaging
> MMS > { Menu
} > { Tools }
Pocket MSN
Pocket MSN provides you MSN function in this device, including MSN Messenger, MSN
Hotmail,Compose Hotmail, MSN Mobile Home, and Pocket MSN Help.To use these
functions, you will need to turn on GPRS or WI-FI.
MSN Messenger
1.Select “ Start ” >
Programs
>
Pocket MSN
>
MSN Messenger
2.Tap { Tap here to sign in }.
3.Enter your MSN or Hotmail email address and password.
4.Select { Sign In }.
MSN Hotmail
1. Select “ Start ” >
Programs
>
Pocket MSN
>
MSN Hotmail
2. Input your MSN or Hotmail email address and password.
3. Select { Sign In } to enter MSN Hotmail Inbox screen.
4. In MSN Hotmail Inbox, you may receive your MSN or Hotmail email through network.
Compose Hotmail:
1.Select “ Start ” >
Programs
>
Pocket MSN
>
Compose Hotmail
2.Input your MSN or Hotmail email address and password.
3.Select { Sign In } to enter MSN Hotmail Inbox screen.
MSN Mobile Home Page:
1.Select “ Start ” >
Programs
>
Pocket MSN
>
MSN Mobile Home Page
.
2.It will go to MSN Mobile home page.
Pocket MSN Help:
1.Select “ Start ” >
Programs
>
Pocket MSN
>
Pocket MSN Description
.
2.Select a topic of interest by tapping on the topic.
50 51
When you want to form connection through Bluetooth, please make sure the device you
would like to make connections with is also equipped with Bluetooth.
When Bluetooth is activated, tap icon on Today screen, and you will see icon in
the pop-up window.
Bluetooth is a short distance wireless communication technology. Before using Bluetooth
function, please finish connection setup first.
1.Select “ Start ” >
Settings
> Connections tab >
Bluetooth
> Mode tab.
2.Check { Turn on Bluetooth } after entering Mode tab screen.
3.If you want this device to be detected by other Bluetooth devices, please check { Make
this device discoverable to other devices }. (Without checking this function, other Bluetooth
devices are unable to detect this device.)
4.Select Devices tab to show all connections formed.
5.On Devices tab screen, tap New Partnership to scan for other devices with
Bluetooth function within effective area.
6.On Devices tab screen,select the device to be connected, and then select { Next }.
7.It will enter password input screen. After inputting password, select { Next }.
8.It will form connection by entering correct password.
Note: You may purchase optional accessory, the device Bluetooth headset.
For example, when you purchase Bluetooth GPS supported navigation software; you can
register this device as an effective serial port by following the instructions on the manual of
that product and the steps below:
Select “ Start ” >
Settings
> Connections tab >
Bluetooth
> COM ports tab.
Register New Serial Port:
1.Select { New Incoming Port } to enter setup screen.
2.Select a port to be set.
3.Select { Finish }.
52
53
Watch full screen analog TV on this device and be the first to get the news! Please plug in
the device headset before watching TV in this device. The headset is also an antenna. You
ca adjust the headset lines for better signals.
When launching TV for the first time, this device will automatically start searching for
available channels and will set the first channel detected as default channel.
Select “Settings” >
System
>
TV
, Select a country name or a PAL sub-system. If
you don’t find the country name for selection you can follow the steps listed below
a) select “NTSC” for NTSC system.
b) select PAL-I, PAL-BG or PAL-DK based on your sub-system.
A good reference link to the world TV standard is http://kropla.com/tv.htm
1.Select “ Start ” >
Programs
>
Multimedia
>
TV
2.Tap the screen to open TV menu.
3.If no action is detected within 5 seconds, the TV menu will automatically disappear.
4.Tap
icon on the top right of screen to turn off TV and exit.
TV Function Bar:
1.Tap to go to the next available channel.
2.Tap
to go to previous available channel.
3.Tap
to see the list of available channels. Tap on a channel to go to that channel.
4.Tap
to adjust TV screen setup, including [Channel Search], [ Brightness ], [ Color ],
[ Contrast ], and press “ OK ” on the top right to confirm disabling options after completing
adjustment.
5.Tap
to return to the previous channel you were watching.
6.Tap
to switch between loudspeaker or headset mode.
7.Tap
to show screen keypad.
8.Tap
for TV Help.
When watching TV, you may use the screen keypad to enter the number of the channel
you would like to watch.
Manually add a new channel:You can press the right function key to add the current
channel into the available channel list. For manually added channels, a small dot will
appear next to the channel number on the top right corner of the viewing screen.
TV Volume Control Method:
You may use volume control key on the side to adjust volume. When watching TV, the
volume adjustment bar will appear on the bottom of the screen after you press volume
control key. You may tap volume adjustment bar by preference and select suitable volume.
TV Settings:
You may choose to set a searching range for channel search function. Giving an exact
range may shorten the time needed for channel search. Tap Start >
Settings
>
System tab >
TV
.
You may use the device to listen to FM radio. Please plug in the device headset before
listening to FM radio. The headset is also an antenna. You can adjust the headset lines for
better reception.
1.Select “ Start ” >
Programs
>
Multimedia
>
Radio
.
2.You may use function bar or number key on radio screen to enter your favorite channel.
3.Tap { Menu } and then tap { Exit } to turn off the radio and exit, or
4.Tap
on the top right of screen to exit radio screen and play the radio on the
background. Now the radio function is still running and you may use some other
applications at the same time.
5.Tap on the
icon to turn off the radio.
Radio Function Bar:
1.Channel Tuner: you may use this bar to tune to your desired channel.
2.Tap
to switch to the next available channel.
3.Tap
to switch to the previous available channel.
4.Tap
to increase frequency by 0.1 MHz.
5.Tap
to decrease frequency by 0.1 MHz.
54
55
6.Tap to switch between loudspeaker or headset mode.
7.Tap
to start recording the FM radio broadcast of the channel you are currently
listening to. The recording time will be displayed on the top of screen. Tap “STOP” to stop
recording.
8.Number key on screen: You can enter a channel frequency and the frequency you
entered will appear on the display. If the channel frequency you entered is over or less
than the effective range, then the radio will return to the original channel you were listening
to.
My Favorite Settings:
Tap on { My Favorite } to view my favorite list. You can save 10 channels as your favorite
channels. Selecting a favorite channel from My Favorite list takes you directly to that
channel.
˙
Tap “ Edit ” to change the frequency or the name of your favorite channel.
˙
Tap “ Set < channel frequency > to ” to add the current channel to My Favorite.
Options:
Tap {Options} for the following options:
˙About:
display information related to this program.
˙Recorded File:
display the radio recording folder.
˙Exit:
press exit to completely close radio function.
Radio Volume Control Method:
You may adjust radio volume using the volume control key on the side of mobile phone.
Slide the volume control key upwards or downwards, and then select a suitable volume by
tapping on the pop-up volume adjustment bar.
*Please Note: This function is not available for device purchased in countries which use
SECAM TV system.
You may use camera function in this device to capture important moments.
1.Select “ Start ” >
Programs
>
Multimedia
>
Camera
or press and hold Camera
Key to launch camera.
2.Focus on the object you want to shoot and press Camera Key to shoot.
3.Use volume adjustment side key to zoom in and out.
4.Tap on the
icon to change camera settings.
5.Tap on the
icon on screen to enter Pictures & Videos.
Camera Menu
Video Mode:
Tap on this icon to switch to video mode.
Pictures & Videos:
view your photos here.
Camera Settings:
to open the menu for camera settings.
Settings:
1.Shooting Mode: you may select different shooting modes to fit the shooting
environment.
2.Effect: you may apply many different photo effects.
3.Size :
1600 x 1200 (default), 1280 x 960, 800 x 600, 640 x 480, 320 x 240, 160 x 120.
4.Picture Quality : Normal (default), fine, low.
5.Timer : Off (default), 5 seconds, 10 seconds.
6.Sequential Shoot : 18,12,6,3,Off (default)
7.Flash Light : Auto (default), On, Off.
8.Storage Location : Phone (default), SD . (The storage location will automatically
change to Mini SD card if the Mini SD card is plugged in before launching camera).
9.Shutter sound : On (default), Off
10.EV: Exposure value ranging from -2.0 to +2.0.
The device camera can also be used as a video recorder to record memorable moments of
your life.
1.Select “ Start ” >
Programs
>
Multimedia
>
Camera
> icon, or directly press
and hold
Camera Key
> icon to enter video mode.
2.Focus on the picture you want to film and press Camera Key to start video filming.
3.Press Camera Key again to stop filming.
4.Tap on the
icon to change camera settings.
56
57
5.Select the icon on screen to enter Pictures & Videos.
Video Menu:
Camera Mode:
Tap on this icon to switch to camera mode.
Pictures & Videos:
view your photos here.
Video Settings:
to open the menu for video recorder settings.
Settings:
1.Shooting Mode: you may select different shooting modes to fit the shooting
environment.
2.Effect: you may apply many different photo effects.
3.Video Format:
you can select the format you would like to record in.
4.MMS Video:
you can select to make a recording especially for MMS.
5.Storage Location: Phone (default), SD. (The storage location will automatically
change to Mini SD card if the Mini SD card is plugged in before launching camera).
Use recorder to record voice memo and make note taking simple and efficient.
Select “ Start ” >
Programs
>
Multimedia
>
Recorder
.
1.Tap “ Start Record Voice ” to activate sound recording function.
2.Tap “ Stop Record Voice ” to stop recording sound.
3.Before you start recording, you may set the recording time in Duration to set the
duration of the recording.
4.Check “ Show History ” to show all your recorded files. Tap on any recorded file on your
history list to play the file.
5.Uncheck “ Show History ” to hide the history window.
6.Tap { Menu } > { Save to } to choose file location.
7.Tap
to leave recorder screen while still keep recording on the background; or tap {
Menu } > { Exit }, to stop recording and exit.
8.When recording in the background, tap the icon to return to Recorder. Tap STOP
Record” to stop recording.
Note:
1.If there is incoming call during recording, answering the call will automatically terminate
recording. If you want to continue recording after ending call,you need to reactivate
recording function.
2.When TV or FM radio is activated on this device, recorder will record the only the
sound of the broadcasting programs.
You can handwrite messages on photos, or apply colorful frames and stamps by selecting
“Start” > Programs > Multimedia > Photo Editor.
You may use
Pictures & Videos
function to manage your photos or videos. In
Pictures
& Videos
> {Options}, you may resize the picture. In {Menu}, you can also perform
functions such as { Set As Today Background }, { Play Slide Show } or { Send }.
By selecting “ Start ” >
Programs
>
Multimedia
>
Pictures & Videos
, you can
1.enter different folders
2.select photo arrangement
3.tap on a thumbnail picture to view the picture, or select { View } to view picture.
4.select { Menu } for more options.
You may use Voice Command function to perform certain functions by voice. Please refer
to valid commands on voice command screen.
Select “ Start ” >
Programs
>
Multimedia
>
Voice Command
, or press the volume
adjustment key to enter voice command function. To activate voice command via Bluetooth
headset, press and hold the call key on your headset.
Speak your command clearly to the phone receiver.
58 59
For example:
˙Cal
l + (Contact) at (Home/Work/Mobile), the device will call the contact automatically.
˙Find
+ (Contact), the device will display the contact’s information.
˙Digit Dial
to dial the digits you voiced.
˙Play Music / Pause / Resume
to play / pause / resume music in My Music.
˙Next / Previous
to play the next/previous music file in My Music.
˙Play
+ (Music File) to play the music file you have chosen.
˙Start
+ (Application) to launch an application.
˙
(today’s / tomorrow’s / this week’s) + appointments, Voice Command will report all
appointments within the time period you have chosen.
˙Read SMS
, Voice Command will report whether there are unread SMS.
˙What can I say?
to enter voice command help.
˙Goodbye
to exit Voice Command.
Tap { Re-start } on the down left of the screen to re-enter your command. If no action
is detected for a certain period of time after activating voice command, the system will
automatically end this program.
This device supports JAVA, providing you the freedom of using JAVA applications and
games.
Appointments and Meetings:
You may use
Calendar
to arrange appointments, meetings, and other events. You may
view your appointments in different display modes. You may select preferred display mode
by tapping on the bottom left of screen to switch between day, week, month, year.
1.Select a date to go to the desired date.
2.Select an appointment on the list to view or edit appointment details.
3.Tap on Day (or Week,Month,Year)on the bottom left corner of the screen to switch
between display modes.
4.Tap on the keypad icon
to activate or hide screen keypad.
5.Tap on { Menu } on the bottom right corner of the screen to open menu.
Select
Calendar
> { Menu } > { Options }, you may change the display setup of
Calendar
by preference.
Create an Appointment:
1.Select
Calendar
. Select the date and time of appointment.
2.Highlight the desired date and time, and then select { Menu } > New Appointment.
3.Select “ OK ” to save the entry and return to calendar.
4.Select “ Subject ” field to edit the field or select predefined text.
5.Select “ Location ” field to edit the field.
6.Select “ Starts ” field to select start time.
7.Select “ Ends ” field to change End time.
8.You can add your personal notes in
Note tab.
9.Tap “ OK ” to save the appointment and return to calendar screen.
If you select Remind Me in Reminder ” field, then the device will remind you according
to the settings in “ Start” >
Settings
> Personal tab >
Sound and Alert
.
View and Update Calendar:
Select an appointment on the calendar to view appointment summary. If you want to
change the details of an appointment, select “ Edit ”.
60
61
Send Meeting Notice:
You may use
Calendar
to set meeting notice by combining with the information on
Outlook or Pocket Outlook. When you synchronize messages or connect this device with
E-mail server, meeting reminders will be generated automatically. Select
Calendar
> {
Menu } > Options >Appointments tab, and select desired meeting sending method in “Send
meeting requests via” field.
Generate Meeting Notice:
1.Select
Calendar
> { Menu } > New Appointment
2.Select “Attendees” field.You will enter
Contacts
.
3.Select attendees from the E-mail addresses of your contacts.
4.The new meeting notice will be generated automatically and saved in “Outbox” folder.
Phone Book:
Contacts helps you manage your phone book.
1.Tap on Enter a name or number…” field to input part of name or desired or phone
number to search for that contact in the contacts list.
2.Tap on “Enter a name or number…” field and enter a letter search for contacts that starts
with that letter.
3.Tap on contact’s name or phone number to view or edit contact’s details.
4.Tap on any contact and hold to open pop-up menu.
5.Select {New} to add new contacts.
6.Tap on the keypad icon
to activate or disable screen keypad.
7.Tap on {Menu} for more options.
Add Contacts:
1.Select {New} on contacts screen.
2.Select any field to input data in selected fields on screen or panel.
3.Move the scroll bar on the right side of screen to adjust screen display.
4.Select Ringtone field to set a special ringtone for this contact.
5.If you want to add notes, select Note tab to input desired content.
6.Tap “ OK ” to save and return to contacts.
To save a contact from phone to SIM, tap on that contact in the contacts list and then
select “Save to SIM” in { Menu }.
Searching Contacts:
There are four contact search methods provided in this system.
˙
Input the contact’s name or phone number in input field, and then the contacts list will
show the information of this contact.If you want to clear text entered, press
key on
screen keypad to clear.
˙
Select { Menu } > { Filter } and select the way to display contacts, by which your contacts
list will only display contacts in this category.
˙
If you want to view the contacts by companies,select { Menu } > { View By } > { Company },
then the contacts list will display in the order of companies.The number of contacts in each
company will show on the right hand side of company name.
˙
To search for a contact, select Start ” >
Programs
>
Search
. Enter the name of
the contact in “ Search ” field and select “ Contacts ” in “ Type ” field.Tap on Search to start
searching.
View and Update New Contacts:
Select a contact in the contact list to view contact summary screen.To edit a contact’s
details, select { Menu } > { Edit } on contact summary screen.
You may use
Tasks
to help you track unfinished tasks.
1.To add a new task, tap on “Tap here to add a new task”.
2.
!
Represent first priority.
3.Select a single item to enter the details screen of this time.
4.Select a single item and hold to activate the pop-up menu.
5.Tap on { New } to add tasks.
6.You may change the arrangement of the tasks list. On “ Tasks ” screen, select { Menu } >
{ Sort By }.
7.You may choose to display a specific task category in your tasks list. Select { Menu } > {
Filter }.
62
63
Add a New Task:
1.On “ Tasks ” screen, select New
2.Select a field to input data.
3.Select “ Starts ” and “ Ends ” field to set first and last day of task.
4.You may select Occurs to select whether this task has periodicity.
5.You may select “ Reminder ” to set a time to remind you or select “ None ” (unnecessary
to alert).
6.To appoint a task as certain category,tap on Category field to select a category from
the options list.
7.To add notes, select Note tab and input desired content here.
8.Tap “ OK ” to save the task and return to tasks screen.
Check and Update Tasks:
You may select a task from tasks list to view task summary. To change the details of this
task, select Edit.
You may use text notes or voice notes to record information. You may also record voice in
Notes
. If a note file contains voice notes in addition to text, a small icon representing
voice notes will appear in the content area of the note. If notes recording is done under the
notes file list, then the recording content will be saved as a single file.
Select arrangement of list
Select a file on memo files list to open memo file or play recording content.
Select a file on memo files list and hold to open pop-up menu.
Select New to create a new memo.
Tap on { Menu } > { View Recording Toolbar } to show or hide recording tool bar.
Add Notes:
1.On memo screen,select New.
2.You may generate memo by writing,drawing,text entry and recording.
˙
Tap on the keypad icon
to hide or display screen input panel.
˙
Tap on the arrow “
” next to the keypad icon to select input method.
˙
Tap on {Menu} to for options.
˙
Tap on “ OK ” to save memo and return to memo screen.
You may use Word Mobile in this device with Microsoft Word in your computer to easily
copy and move document between this device and your computer.Through computer
synchronization, you may keep updated contents in both this device and your computer.
You may use your Word Mobile to generate documents like letters,meeting minutes and
reports.
If you want to generate a new file, select Start >
Programs
>
Word Mobile
> {
New }, a new blank document will appear on screen. You may also select default examples
from { Menu } > Options .Your Word Mobile can only open one document at a time.
When you open a second document at the same time, this device will ask you to save the
first document first. When creating a new document or editing an old document, you may
choose to save in the following format: Word file, RTF file and text-only file.
The saved Word Mobile file in this device could be opened by selecting from
Word
Mobile
list screen. To delete,copy,or send a file, select and hold desired file names to
open pop-up menu.
After opening a Word Mobile file, you may tap { View } to set Toolbar, Wrap to
Window
, and Zoom.
1.Select a folder category shown on list display field.
2.Tap on “ Name (or Date, Size, Type) ” to change the arrangement of list.
3.Tap on a file to open it.
4.Tap and hold a file to open pop-up menu
5.Tap on { New } to create a new document.
6.Tap on the keypad icon
to show or hide screen input panel and select input method.
7.Tap on { Menu } to open menu for more options.
Note:
When you are synchronizing or copying files from the device to PC, WordMobile les
will be transformed into Word files. While most of the text and paragraphing will be kept
during this transformation, some of the format and properties may be lost.
64
65
You may use Excel Mobile in this device with Microsoft Excel in your computer to
easily copy or move files between this device and your computer. Through computer
synchronization, you can keep updated content in both this device and your computer.
You may use Excel Mobile to create documents like Statement of Income and Expenditure.
If you want to create a new Excel file, tap Start >
Programs
>
Excel Mobile
>
New, and the screen will open a new Excel file. Your Excel Mobile can only open one file at
a time. When you open a second file at the same time, this device will ask you to save first
file.
The saved Excel Mobile file in this device could be opened by selecting from
Excel
Mobile
list screen. To delete, copy or send a file, tap and hold the desired file name to
open pop-up menu.
Your Excel Mobile provides basic worksheet tools, for example, formula, function, sorting
and filtering. To show toolbar, tap { View } > Tool Bar.
Tips:
When working with Excel Mobile, the following tips will help simplify your tasks:
˙
Select { View } > { Full Screen } to view in full screen. To exit full screen view, tap {
View } > { Full Screen } to return to general view.
˙
You can freeze panes: select a cell, then tap { View } > { Freeze Panes }. You may
freeze the top and most left window cell on worksheet. Once you freeze the panes, you
can see the frozen window cell no matter where the screen is scrolled.
˙
You can split the worksheet to view different areas of this worksheet on the same
screen.Select { View } > { Split } , and then drag the split line to the desired location.To
remove the split, select { View } > { Remove Split }.
˙
Display or hide full horizontal and vertical lines. To hide a row or a column, select any
cell on the row or column you wish to hide, then tap { Menu } > { Format } > { Row } or {
Column } > { Hide } . To unhide the a column or row, tap { Menu } > { Format } > { Row } or {
Column } , and select { Unhide }.
Note:
When you are synchronizing or copying files from the device to PC, ExcelMobile files
will be transformed into Excel files. While most of the settings will be kept during this
transformation, some of the format and properties may be lost.
You may use PowerPoint Mobile in this device with Microsoft PowerPoint in your computer
to easily copy or move document between this device and your computer. Through
computer synchronization, you may keep the files in both this device and your computer
updated.
You may use PowerPoint Mobile to browse or play PowerPoint file. If you want to open
PowerPoint file, select Start >
Programs
>
PowerPoint Mobile
, the screen will
show your PowerPoint files list, from which select the file you want to open.
1.Select the folder type demonstrated in the list display field.
2.Select “ Name ” (or “ Date ”, “ Size ”, “ Type ”) to change the arrangement of list.
3.Select the document to open.
4.Select and hold a document to activate pop-up menu.
5.Select “ Open ” to open a file.
6.Select the keypad icon to hide or reveal screen input panel and select input method.
7.Select { Menu } for options.
Your Windows Media Player allows you to play sound and video files in this device, select“
Start ” > Windows Media to activate Windows Media Player.
1.Tap the
icon to view in full screen.
2.Display website, from which find the music and image you want to play.
3.Tap
to return to the beginning of current file or previous file.
4.Tap
or to play or pause
5.Tap to skip to next file
6.Tap + or – to adjust volume
7.Tap the
icon to active or disable sound
On Windows Media Player screen, select { Menu } > { Library } to enter library screen.
66
67
1.Select library folder
2.{ Menu } : select < Open File > to open files not in the library. Select { Update Library } to
update library list.
3.Select and hold the file or folder for playing, and then select { Play } or { Queue Up }.
You may use synchronization to copy sound and image files from your computer to this
device. The Windows Media Player in this device can play Windows Media and MP3 files.
You may use the following methods to browse web pages or WAP pages. Select “ Start ” >
Internet Explorer to activate Internet Explorer.
You may:
Synchronize your favorite URL links on your PC to the device. These URL links are saved
in “ My Favorite ” folders in Internet Explorer on your computer.
Connect to an Internet Server Provider (ISP) or network and browse web pages. First, you
must establish internet connection, please see “ 6.1 Internet Access ”.
If you are connected to an ISP or network, you may download files and programs from the
Internet or business Intranet.
Browsing Internet:
1.Connect this device with the Internet using GPRS or WI-FI.
2.Select “ Start ” >Internet Explorer
3.Input website address in the blank text field
˙
Select the icon next to the blank field to go to the link
˙
You may use navigation keys or the scroll on browser screen to adjust your screen
browsing content.
˙
Tap to return to previous page
˙
Tap the keypad icon
in the bottom center to hide or reveal screen input panel or
select input method.
˙
Tap { Menu } to open Menu.
˙
Select and hold any location of website content to open pop-up menu.
View Favorites:
1.On browser screen, select { Menu } >
Favorites
.
2.On Favorites screen, select the website you want to view.
˙
Select the website you would like to go to.
˙
You may add or delete folders or URL links.
Mobile Favorites Folder:
After installing ActiveSync to your computer, Mobile Favorites folder will be added
to My Favorite in your computer. Only items saved in Mobile Favorites can be
synchronized with this device. Follow the steps below to add your favorite website to
Mobile Favorites ” :
1.On your computer, select Internet Explorer >
Tools
>
Establish Mobile Favorites
.
2.To change name, enter the new name in the new window.
3.To change storage location, select Create New to create a new folder or select a
folder in the new window.
4.Click on “ OK ” to add this website to your Mobile Favorites folder.
Enlarge the font and start reading text on your device with ease. Magnifier enlarges the
display font like a magnifying glass.
1.Select “Start” >
Programs
>
Tools
>
Magnifier
.
2.Check “Magnifier” and then select OK to save. When you check this option, the font
displayed in programs will be enlarged.
3.Check “Menu Magnifier” and then select OK to save. When you check this option, the
font displayed in menu will be enlarged.
4.Tap Cancel or “ X ” on the top right of the screen to exit without saving any changes.
Note:
When you check or uncheck “Menu Magnifier” the new settings will take effect after a
system reboot.
You can save storage space and increase efficiency of the device by compressing some of
68
69
your files with this ZIP tool.
Zipping Files:
1.To zip a file, select “ Start ” >
File Manager
.
2.Tap and hold on a file you would like to zip. A pop-up menu will appear.
3.Select Zip File in the pop-up menu. In the newly appeared window, you may:
˙
Select a file name for the zip file.
˙
Select a zip method according to your need.
˙
Set a password, which will be asked for when you unzip the file.
4. Select Zip to start compressing the file.
Unzipping Files:
1.To unzip a file, select “ Start ” >
Programs
>
Tools
.
2.Select Zip, and then tap the Unzip button on the pop-up window. A list of zipped files will
appear.
3.You may select a different folder for more zip files. In the file list, tap on the file you would
like to unzip.
4.Select a location where you would like to extract the file to.
5.Tap OK and enter the password (if required) to decompress the zip file.
Your Calculator allows you to run simple operations in this device.
Select “ Start ” >
Programs
>
Calculator
to use your calculator.
You may access
Game
to select games you like in this device for entertainment.
1.Select “ Start ” >
Programs
>
Game
2.Select
Bubble Breaker
or
Solitary
to launch a game.
The services available depend on your operator.Tap Start >
Programs
>
Phone
Manager
, and then select the STK service provided by your operator.
70 71
Select “ Start ” >
Setup
> System tab >
Memory
Main tab:
Display current memory status of this device.
Storage Card tab:
Display the memory status of storage card in this device.
Running Program tab:
Display all current running programs in this device.
Select any program from Running Programs List ”, you may select to Activate or
Stop”.
Activate:
run the highlighted programs
Stop: stop running highlighted programs
Stop All: stop running all programs on “ Running Programs List ”
When the memory is insufficient, this device cannot automatically allocate memory, you
may follow the steps below to free up more memory:
1.Select “ Start ” >
File Explorer
2.Use
File Explorer
to move some files to mini SD card. Select and hold highlighted
items by stylus and select Cut or Copy on the pop-up menu; then select Paste
after switching to mini SD card.
3.Use
File Explorer
to delete the unwanted files.
Select Start >
Messaging
> { Menu } > Tool > Options > Storage tab. If you
have inserted a memory card, check Save Attachment to Memory Card and E-mail
attachments will automatically be saved to memory card.
Select Start >
Internet Explorer
> { Menu } > Tool > Options > Memory tab.Select {
Clear History } and { Delete File } to delete browsed web page related record.
All programs installed in the device will be saved in ROM (Read Only Memory) and are not
removable. Data saved in ROM will not be lost by accident. As long as there is sufficient
space in this device, you may install suitable programs by preference.
Add Programs through ActiveSync:
1.Before installing the program, please make sure that the device processor is suitable for
the software.
Select Start >
Settings
> System tab >
About
>Version tab to check for
information of this device.
2.Download the desired software to your computer.(Please select software that are
designed for Pocket PC and this device)
3.Read installation instructions, ‘Readme’ file, or accompanied programs provided to you.
4.Connect your computer with this device.
5. Install executive file to your computer.
˙
If this file contains installation program, the installation wizard will automatically activate.
Please follow the instructions on screen. Once the installation on your computer is
complete, the program will automatically be installed to this device.
˙
If this file does not contain any installation program, an error message will show on
the screen and tell you this program is invalid,which is not suitable for your computer.
You must move this program to this device manually. If you cannot find any installation
instructions for this program, please use ‘Browse’ function of ActiveSync to copy program
file to Program Files folder in this device.
After completing installation, select Start >
Programs
, and then select the program
icon to launch that program.
Add Programs through Internet:
You may download software suitable for this device from Internet.
1.Before installing the program, please make sure that the device processor is suitable for
the software.
Select Start >
Settings
> System tab >
About
> Version tab to check information
in this device.
2.Directly download programs to this device by using Internet Explorer in this device.
72 73
(Please select programs designed for Pocket PC and this device)
3.Read installation instructions, ‘Readme’ file, or accompanied programs provided to you.
4.Run installation executive file in your computer.
Add Programs to ”Start” menu:
Select “ Start ” >
Settings
> Personal tab >
Menus
.
1.Check the programs to be displayed on “ Start ” menu.
2.Point “ OK ” to save settings and return to Personal tab screen.
Remove Program:
Select “ Start ” >
Setup
> System tab >
Remove Program
.
˙
Select the programs you would like to delete from Programs in storage memory list,
and then select “ Remove ” to delete highlighted programs.
If the installed programs list does not contain the program you intend to remove, you
may use
File Explorer
in this device to find the program and delete it by selecting and
holding the program’s name and then select { Delete } from the pop-up menu.
Item Specifications
System Information
Operating System Windows Mobile 5.0
Processor Intel PXA272 416 MHz
Memory 64 MB ROM, 64MB RAM
Size
Dimensions (mm) 106.2 x 53 x 19.5mm
Weight (in grams)
130g
Batteries
Battery Capacity 920mAh Li-Ion Battery
Standby time 125 hours
Talk time 3.5 hours
Charging time
Charger 2.5 hours
Display Characteristics
Type 2.4 inch, 260K TFT LCD touch screen
Resolution 240×320
Band
Band GSM 900/1800/1900
Connectivity
Bluetooth Bluetooth 1.2
WLAN WLAN 802.11b
GPRS
GPRS Class A/B, GPRS Uplink/Downlink
Class 10
WAP WAP 2.0
CSD Y
Modem dial-up Y
USB Mini USB 1.1
Image
Format JPEG, GIF, PNG, BMP, WBMP
Max Size(per) Depends on available RAM
Audio
Format
WMA, MP3, MID, AMR, WAV, AAC, ASF,
M4A
Max Size Depends on available RAM
74
75
Video
Format 3GP, MPEG4, WMV
Max Size Depends on available RAM
Phonebook
Size Depends on available RAM
TV
System PAL or NTSC or SECAM (Depends on
country of purchase)
Ringtone
Type MP3, WMA, AMR
Polyphone 192 polyphonic mid file
DSC
Type JPEG
Pixels 2.1 mega pixels, 1600×1200 (UXGA)
Resolution UXGA, SXGA, SVGA, VGA, QVGA, QQVGA
Macro Mode Y
Video Recording
Y
Radio
FM Y (Not available for countries using SECAM
TV system)
Message
Push E-Mail Windows Direct Push
SMS Y
MMS Y
- Audio Format AMR, MP3, MID, WAV, WMA
- Video Format 3GP, MP4, WMV
- Image Format JPEG, GIF, PNG, BMP, WBMP
E-Mail Y
MSN Y
External Memory
Type Mini SD card
Max Size No limit
Operating Temperature
Temperature -10
~45
Why can’t I turn on the device?
Ans
Please make sure that the device has sufficient power, and that the battery is secured in
the device.
Plug the device to an outlet using the travel charger. Check whether the LED light on the
device has lighted up, and then press the power key on the device to turn on the device.
Why does the screen freezes and does not
respond to my commands or input?
Ans
Reboot the system to free up memory. The system shall operate more efficiently.
If the system still lags after rebooting, you will need to clean boot the device. To clean boot,
press Call key, End key and the power key at the same time for about 3 seconds and then
release. Your device will reset to factory defaults and reboot.
Note: When you perform a clean boot on this device, all your personalized settings,
information, and programs installed will be removed. The system will reset to factory
defaults.
Why can’t my device make any sound alerts?
Ans
Tap on the speaker icon
on the top right corner of the screen, and then adjust the alert
or ring volume.
You could also use the volume key on the left side of the device to adjust volume. (See 3.4
Volume Adjustments for details.)
Why would the screen darkens automatically?
Ans
This is a power saving mechanism. You can change this setting in “Start” > Settings >
System tab >Backlight> Battery Power tab & External Power tab.
76
77
When I open a file or a program, a “Insufficient
Memory” message pops up.
Ans
The device memory is shared by both storage and programs. You can follow the steps
below to free up some memory.
Remove some of the rarely used programs you installed.
Remove rarely used files.
(See 11.2 Memory for more details.)
Why doesn’t the screen respond accurately to
my stylus taps?
Ans
Select “Start”>Settings>System tab>Screen>General tab. Select Align Screen” to align
the screen.
Why does the device launch wrong programs or
ignore my command when I press a device key?
Ans
Select “Start”>Settings>Personal tab>Buttons and check whether the programs assigned
to each key is correct. You can change these key assignments by preference.
My device can’t form a successful connection
with ActiveSync.
Ans
Please make sure you have installed ActiveSync 4.1 on your computer. You can find
ActiveSync in the installation CD, or you can download the latest version from Microsoft’s
website.
Please make sure you have connected the device to the computer by plugging in the USB
cable to both the device and the computer.
Make sure that you are not running another program that is using the same serial port.
If the connection still fails, remove ActiveSync on your computer and reinstall.
How do I take out the mini SD card from the SD
adapter?
Ans
The card slot on this device is designed for mini SD cards. To remove the mini SD card
from the SD card adapter, please hold the SD card adapter with one hand, slightly lift the
end of the mini SD card and pull.
Example:
Why does my notebook crash when I use USB
fast charging?
Ans
USB fast charging is not suitable for some notebooks. If your notebook becomes slow or
unstable when using USB fast charging, please do not use this function.
Why are there double entries in my Contacts
list?
Ans
You may have selected “Show SIM Contacts” in Contacts menu. If you have already copied
your SIM contacts to the device, then you do not need to select “Show SIM Contacts”.
32

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gigabyte GSmart i bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gigabyte GSmart i in de taal/talen: Engels als bijlage per email.

De handleiding is 3,12 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info