623700
19
Verklein
Vergroot
Pagina terug
1/57
Pagina verder
36
37
4.6.2.2 Proper handling of carbon parts
1. Under no circumstances should you install clips, screw connections, clampings or other elements
which exert mechanical forces on the carbon tube. Excluded from this are the areas of components e.g.
handlebars and saddle posts which are explicitly designated as such. Nevertheless, it is important here
to comply exactly with the tightening torques!
2. Clamping to mounting stands or other forms of clamping:
Never clamp your bike at a carbon tube or carbon saddle post in the jaws of an assembly stand.
For clamping in an assembly stand you should temporarily use a saddle post with the same diameter.
For instructions on dismantling and installation please see section 13.2, Dismantling and installing sad-
dle post with saddle.
3. Take care when using shackle locks! Under certain circumstances these can damage your frame.
Ensure when using shackle locks that these only touch the corresponding carbon tube and do not
exert any clamping force or weight.
4. Saddle clamping bracket / saddle post
The prescribed tightening torque of the saddle clamping bracket bolt is 5 – 6 Nm.
The saddle tube must not be reamed out or otherwise mechanically machined.
Saddle post and saddle tube must not be greased. Use only the carbon assembly paste supplied with
the bike.
Saddle posts may only be assembled in a carbon frame using the carbon assembly paste supplied.
The saddle clamp must not be closed when the saddle post is removed, as otherwise irreparable
damage to the saddle tube may result.
Take the saddle post out of the frame approximately every two months, clean it and apply new carbon
assembly paste. See section 13.2, Dismantling and installing saddle post with saddle.
5. Bottle holders:
The thread sets are provided for the attachment of commercially available bottle holders. The maxi-
mum tightening torque of the screws for fastening the bottle holder to the frame is 4Nm.
6. Roller training:
The use of roller trainers with rigid clamping is not permitted. The rigid clamping of the fork ends or
quick-release axle exerts loads that differ significantly from those occurring during the permitted use
for riding. This can result in damage to the bike frame.
Use on a loose roller without rigid clamping of the frame is permitted.
7. Transport: See section 13, Transporting the Bike.
4.7 Tyres
GHOST bikes have different tyres as standard. The tyre brand, type, size and air pressure information can be
found printed on the tyre walls.
As far as the valve types are concerned, we mainly use inner tubes with Sclaverand valve (SV), which is col-
loquially known as the “French valve”. The models of the POWERKID range may include inner tubes with a
Sclaverand valve (SV) and an automatic valve (AV). For the version, please refer to the following illustration.
If replacement inner tubes are used, it must be ensured that only inner tubes are used which contain the
same valves as the original inner tube, as the diameter of the SV and AV valves differ from one another.
Automatic valve (AV) Dunlop valve (DV) Sclaverand valve (SV) (French)
19

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ghost Bikes NIVOLET TOUR DISC bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ghost Bikes NIVOLET TOUR DISC in de taal/talen: Engels als bijlage per email.

De handleiding is 9,59 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Ghost Bikes NIVOLET TOUR DISC

Ghost Bikes NIVOLET TOUR DISC Gebruiksaanwijzing - Nederlands - 57 pagina's

Ghost Bikes NIVOLET TOUR DISC Gebruiksaanwijzing - Deutsch - 57 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info