505271
29
Verklein
Vergroot
Pagina terug
1/116
Pagina verder
EN
EN - 5
2.1.g - Assembling the suction unit
(optional) (Figs. 15/19)
The suction unit consists of the vacuum
cleaner (38), the suction ring (39) with tube
bundle assembled and the vacuum cleaner
support drum (40) (Fig. 15).
- Make sure that the lower support (41)
rests on the plate located on the handle
rod (Fig. 16).
- Loosen the two screws and the knob on
the upper support of the handle, depend-
ing on the machine model.
- Place the drum (42) in its slot on the sup-
port (41).
- Lower the upper support (43) to fit the
drum (42), then tighten the two screws or
the knob of the upper support to lock eve-
rything.
- Tilt the machine and place on onto the
grip.
- Rest the suction ring (45) support plate
(44) on the machine body (Fig. 17) then
put the machine back in the working posi-
tion.
- Insert the vacuum cleaner (46) in the
drum (47) (Fig. 18).
- Connect the tube bundle (48) to the vac-
uum cleaner (46) using a bayonet cou-
pling.
Connect the plug (49) to the auxiliary socket
(50) positioned on the handle or in the ma-
chine unit, depending on the model (Fig.
19).
2.1.h - Assembling additional weight
(optional) (Fig. 20)
If the surface to be cleaned is very dirty, an
additional weight can be assembled on the
machine to enable greater contact pressure
of the brush, or the pad holder, on the floor.
N.B.:
Due of the increased contact pressure, wear
to the brush or pad also increases.
WARNING:
The additional weight is provided with
special recesses (50a) for lifting.
- Lift the additional weight using the special
recesses (50a).
- Place the weight on the appliance.
2.1.i - Electrical connection
- Connect the machine power cable to a
mains socket with characteristics cor-
responding to those shown on the ma-
chine’s technical data plate.
WARNING:
- Make sure the mains electrical system
has a circuit breaker and is earthed.
- Unwind the power cable completely be-
fore operating the appliance.
- Use an extension cord only if in perfect
condition and make sure the cross sec-
tion is appropriate for the power of the
appliance.
- Never allow the power cable to slide
over sharp edges and do not crush it.
-
The socket should be easily accessible.
- Make sure the power cable is not dam-
aged.
3.1 KNOWLEDGE OF THE
MACHINE (Fig. 21)
51) Guide handle
51a) Electric control box
52) Brush rotation start levers (on-off)
53) Water supply adjustment lever
54) Handle tilt lever
55) Power cable
56) Brush rotation lever release button
57) Machine body
58) Wheels
59) Supports
60) Electrical connection
61) Auxiliary socket (if any)
29

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ghibli SB133 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ghibli SB133 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens, Zweeds, Noors als bijlage per email.

De handleiding is 4,22 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info