505208
12
Verklein
Vergroot
Pagina terug
1/18
Pagina verder
Operating Instructions
26 LCD DISPLAY
Dear customer
Before operating the set, please read this Operating Instructions
carefully. In order to use and maintain the set better, please follow
its operating instructions.
Thank you for your cooperation.
Thank you for selecting the high-definition TFT LCD Color TV.
Table of Contents
I. Main features and functions
II. Safety and operating instructions
III. Specifications
IV. Accessories
V. Operating system diagram
VI. Mount up the base
VII. Connection for external video and audio equipment
VIII. Preparation for switch on
IX. Basic operation
X. How to adjust the image effect
XI How to adjust the sound effect
XII The adjustment of MISC
XIII How to set time, sleep time and wake up time
XIV How to receive DTV(YPbPr)/Component(YCbCr) signal
XV Adjustment of image display under Analog RGB(PC)/DTV(YPbPr) input status
XVI The PIP function under Analog RGB(PC)/DTV(YPbPr) input status
XVII STILL control
XVIII MUTE control
XIX Troubleshooting
Attached table 1
Attached table 2
1
2
2
3
3
6
7
8
9
11
12
13
14
15
11
4
16
13
15
15
15
16
------------------------------------------------------------------------
-----------------------------------------------------------------
-------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------
-------------------------------------------------------------------------
-------------------------------------------
-----------------------------------------------------------------------
------------------------------------------------------------------------------------
---------------------------------------------------------------------
-------------------------------------------------------------------
------------------------------------------------------------------------
------------------------------------------------
---------------------------------
---------------------
---------------------------------------------------------------------------------
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
----------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------
----------
-------------------------------------------------------------------------------
There is high-voltage on the background luminaire socket inside. Do not uncover the back cover at will.
Do not put any articles on the screen.
It is strictly forbidden to put the unit in damp condition or under strong direct sunlight.
Dot not use this unit in noisy and strong magnetic environment. The unit shall be kept from fire source
and strong vibration source.
Avoid the direct contact with the chemicals. Do not use or store the unit in the environment which contains
the chemical gas.
Please always switch off the power before installing and removing the connection of the peripheral
equipment.
If the unit loses the due function or you have found some abnormal phenomenon, such as the emission of
strange odor or too high temperature, please switch off the power and contact the dealer or our service
center.
Do not watch a still picture for a long time.
Do not modify this unit by yourself.
Do not touch the screen directly.
When there is dust on the screen, wipe it gently with soft cloth after switching it off. Ethane can be used.
Acetone, Toluene and Alcohol cannot be used. If there is any water or saliva, please wipe it immediately.
Please switch off the AC power if the unit is not used for a long time.
When this unit is used as wall-mounting, there shall be a 5 mm distance between the whole set and the wall
for the heat emission.
If it is thundering, you should turn off the power, and remove the antenna connection to avoid the
damage to this unit.
In case the remote control is not used for a long period of time, take out the batteries to avoid liquid leakage.
I. Main features and functions
II. Safety and operating instructions
In order that your LCD TV will maintain good operation status, please read the following items before
using the unit:
No radiation, low flicker and low power consumption. It is an environment-protective and power-saving
product.
Light weight, small cubage, dual-purpose usage of wall-mounting and desk-top.
Beautiful appearance, innovative type, simple operation and convenient usage.
With dual-function of TV receiver and computer monitor.
With multiway inputs: Video, S-Video, Scart (AV/RGB), DTV(YPbPr), Component(YCbCr) and
analog RGB(PC) .
With NICAM stereo function.
With no signal around 10 minutes under TV mode or 1 minute under other modes, the unit will be in a
energy saving status save energy and prolong the service life.
Picture in picture function under Analog RGB (PC) and DTV(YPbPr) input status.
Still picture function.
2
Receive CABLE/AIR TV signals (PAL, SECAM)
Do not expose this TV outdoors or moisture to avoid fire hazard or electric shock.
There is high voltage inside the TV. It is not allowed to open the rear cover for service without
authorization to prevent electric shock.
Do not place the TV on an unstable cart, table or inclined plane to avoid falling and causing personal injury.
Liquid can not be spilled or object can not fall into the TV to prevent fire hazard or electric shock.
No objects shall be placed on the TV.
Safety instructions
Operating instructions
III. Specifications
Note: The specifications are subject to modification without notice .
Screen Size
Display Resolution
Aspect Ratio of Screen
Power Supply
TV Received Signal
Broadcast Signal System
DTV input/Component input
Analog RGB Input
Video Signal System
Signal Intensity
Video Input Voltage
Audio Input Impedance
Audio Input Voltage
Sound Output Power
Power Consumption
Weight
Dimension(W D H)
Ambient temperature
Ambient humidity
26 inch (diagonal)
1280 768
15:9
160~240V AC 50/60Hz
48.25MHz-168.25MHz
PAL B/G,I,D/K, SECAM L, B/G, D/K
YPbPr (480p,576p,720p,1080i)/YCbCr(480i,576i) (HDTV support
format is in the attached table)
VGA (the supporting format is in the attached table)
PAL , NTSC , SECAM
60dB
1Vp-p
47K
0.75V~1.5V (rms
5W+5W
Operation 180W(MAX), Stand-by: 3W
20kg
690mm 300mm 538mm (desk mounting)
5~35 C
20%-80%RH
3
Max. Visual Angle
+
=85 (CR 5)
Horizontal angle x+=85 (CR 5) Vertical angle
Y
x-=85 Y-=85
Remote controller
AC power cord
Operating Instructions
1
1
1
IV. Accessories
175.25MHz-463.25MHz 471.25MHz-855.25MHz
Video input Video, S-video, Scart (AV/RGB)
DTV(YPbPr), Component(YCbCr), Analog RGB(PC)
Base
1
4
V. Operating system diagram
Remote sensor
Power indicator
Front view
P
+
P
V
+
V
TV/AV
MENU
MENU
P+
P-
V+
V-
TV/AV
Stand-by switch
Description of basic control button
Control button
The function during watching The function when using the menu
Select the screen display
menu system
Select to display the next
stored channel
Select to display the previous
stored channel
Increase volume
Decrease volume
Switch the input signal
Stand-by / On
Exit menu
Select the previous menu/ item
Select the next menu/ item
Select the submenu of current
item
Confirmation
Confirmation
Decrease the value of the current
item
/
The operation situation shown by the Indicator :
1. Green light- Operation status.
2. Red light- Stand-by status.
3.Flaring of green light-Energy saving status.
Reset procedure
1.Make the set at Stand-by status. (Red LED lights)
2.Press P+ and V+ keys on the panel at the same time and don't release.
3.Press key on the panel till the image or noise displays on the screen.
4.Release three keys.
Increase the value of the
current item
Enter or select menu
5
Rear view
Power Switch
PC IN
S-VIDEO
R L
VIDEO 1
Y Pb/Cb Pr/Cr
AUDIO
SCART
PC AUDIO
AIR/CABLE
PC Input
SCART Input/Output
(Decoder)
S-Video Input
Component Video Input/HD Video Input
Antenna Input
Video Input1
Audio Input
PC Input
VIDEO 2
AC IN
R
L
AUDIO
R
L
AUDIO
OUT
Video Input2
Power Input
Audio Input 2Audio Out
6
VI. Mount up the base
Mount up the base
(1)Put the TV on a table face down.
(2)Take out the base and fasten it to the TV with 4 M5 20 screws(black).
The Screw holes are as show on fig.1.
The TV and the connecting face of the base can be rotated together.
o
(3)Stand the TV with the base on the table. It can be rotated clockwise and counter clockwise up to 15 .
(4)When the red line in the indication window points at the central dot, it means that the screen is just in
forward direction.
fig.
1
window
Red line
Center dot
fig.
2
The enlarged
indication window
7
VII. Connection for external video and audio equipment
AIR/CABLE
AUDIO OUT
L
R
Y Cb r
OUT
DVD& SET-TOP BOX
VIDEO 2
R
L
AUDIO
R
L
AUDIO
OUT
AUDIO IN
L
R
POWER AMPLIFIER
PC
S-VIDEO
OUT
AUDIO OUT
L R
L R
Y Pb Pr
L R
VIDEO
OUT
AUDIO
OUT
AUDIO OUT
OUT
DVD& SET-TOP BOX
S-VIDEO
OUT
AUDIO OUT
L R
L R
VIDEO
OUT
AUDIO
OUT
DVD&VCD
Use proper signal Cables to connect outputs of signal sources and inputs of the unit correspondingly.
Make sure of good contact.
All connection and disconnection can only be done under off status.
The computer can only be switched on after switching on the external equipment.
If you connect an external device e.g. a DVD player over SCART interface with the TV and switch it on, the screen
shows you the picture of the DVD player and the signal source is still in TV mode. If you want to go back to TV program,
please press the P+/- button to switch back. It is impossible to switch back to TV program over the TV/AV button.
5
8
1.Install the battery for the remote controller
a. Press the cover of the battery compartment on the back of the remote controller and remove it.
b. Insert 2 AAA batteries, make sure the polarity (+) or (-) of batteries conforms to the polarity marks in the
battery compartment.
c. Slide the cover of the battery compartment to the original place.
VIII. Preparation for switch on
Please do not mix the new and old batteries. Do not mix manganese and
alkali batteries. Please use the remote controller carefully to avoid to
drop, wet or dismantle it .
In case the controller is not in use for a long time, take out the batteries
to avoid liquid leakage.
The used up batteries should be disposed in an environment-protection way.
Note:
Name
Function
MUTE
TV/AV
SLEEP
PICTURE
PIP
EXIT
MENU
P+
P-
V+
V-
V-SIZE
MTS
SWAP
STILL
1234567890
CALL
TIME
TEXT
SOUND
BRIGHT
ERASE
SKIP
INSERT
REPLACE
Stand-by / On
Channel information display
Time display (TIME menu should be set at first)
MUTE On/Off
TV/AV Scart/AV 1/AV 2/S-Video/Component/Analog RGB/
Sleep time setting
Shortcut button for adjusting picture
Exit menu
Next stored channel/previous menu/previous item
Previous stored channel/next menu/next item
Volume increase/ item value increase
/ item content selection
Volume decrease/ item value decrease
/ item content selection
Adjustment of image size
Selection button of sound mode
DUAL/MONO/STEREO
Channel playback
Still image
Digit selection
Change of bright / dark image
Menu selection/confirmation
function of teletext
Shortcut button for adjusting Sound mode
Delete program
Skip program
Store program for manual scan
Replace program
TV/AV
PICTURE
P-
P+
MENU
V+
V-
MUTE
SLEEP
SWAP
PIP
EXIT
1 2
3
4
5
6 7 8
9 0
TEXT
ST
IL
L
V-SIZE
MTS
CALL
SOUND
SLEEP
i
TIME BRIGHT
ERASE SKIP
INSERT
REPLACE
Picture-in-picture selection under PC/DTV input status
2.Description of remote controller buttons
DTV YPbPr
AUTO SCAN
SYSTEM B/G D/K I
STORAGE P1
SCAN Press MENU
9
TV SETUP
AUTO SCAN
MANUAL SCAN
FINE TUNE
MENU UP DOWN
Press MENU
Press MENU
EXIT
50
Insert one plug of the AC Power Cord in the jack of Power Input of the unit. Insert the other plug of AC Power
Cord to the suitable AC power socket with grounding. Then switch on the Power switch of this unit. The red
light of Power Indicator will be bright and the unit enter upon the stand-by status.
Press button on the remote controller or on the panel, the system will begin to work. The green light of
Power Indicator will be bright and the image appears on the screen.
When completing watching the broadcasting content of this unit, press button on the remote controller or
on the panel, the unit will come back to the stand-by status. The Power Indicator on the front panel will turn
into red from green.
Switch it off and pull out the plug of AC Power Cord.
Note: Most part of this circuit is digital. If there is any abnormal phenomenon, please pull out the plug
of Power Cord to switch off, and then switch on after 2 minutes. If the set still can not work
normally, please execute Reset procedure on Page 4 or contact the Service centre.
IX. Basic operation
2. Select the receiving signal input status
Press the TV/AV button. And the menu will appear.
Select the desirable signal by pressing P+ or P-.
Press MENU to confirm the selection.
1. Power on / off operation.
1 Auto scan
Press TV/AV button on the remote controller or on the
panel to select the TV status.
Press MENU button on the remote controller or on
the panel .
Press P+ or P- button to get TV SETUP menu,
the menu (a) will appear on the screen.
Press MENU button to enter, then press P+ or P-
button to select AUTO SCAN item.
Press MENU button to enter. The menu(b) will
appear on the screen.
Press P+ or P- button to select SYSTEM item,
press V+ or V- button to adjust TV standard.
Press P+ or P- button to select STORAGE item,
press V+ or V- button to adjust program
number.
Press P+ or P- button to select SCAN item, press
MENU button to confirm. The unit will
begin the automatic search and store.
2 Manual scan
Press P+ or P- button to select MANUAL
SCAN item on TV SETUP menu.
Press MENU button to enter. The menu(c)/(d) will
appear on the screen.
Press P+ or P- button to select SYSTEM item,
press V+ or V- button to adjust TV standard.
Press P+ or P- button to select STORAGE item,
3. How to receive and watch the TV signal correctly
EDIT
Press MENU
UP DOWN LEFT RIGHT EXIT
MANUAL SCAN
SYSTEM B/G
STORAGE P1
BAND V/UHF
CHANNEL 2
UP DOWN LEFT RIGHT EXIT
7
7
10
3 FINE TUNE
If the image received is not very good, you can press P+ or P- to select FINE TUNE item in menu (a) . Then,
press V+ or V- button to adjust and improve the image quality.
4 Editing program
The function is for users to write or change the name of the
program, change the number of the channel and delete the program.
Press MENU and Press P+ or P- to select TV SETUP menu.
Press MENU to confirm.
Press P+or P- to select the item Edit in menu (a) and press Menu
button to confirm. Menu(e) will appear on the screen.
Press P+or P- button to select the group of programs which are in the same page.
Press V+ or V- button to select the number of the program in the group to be changed, which becomes yellow.
Press MENU to confirm it and the program number becomes black.
Skip the program number: Press SKIP button on the remote controller. The program number and S in front
of the numbers turn into yellow from green.
The green S in front of the program number means that the program under this number is existing. The yellow
S means the program deleted. During watching, the deleted numbers can not be selected when selecting
channels by P+ or P- buttons. Select the program by digit buttons and the program numbers are yellow.
Erase the program number: Press ERASE button on the remote controller. The TV contents under the current
program number will be replaced with the TV contents of next program number. And the rest TV programs
afterwards will be moved to their previous program numbers correspondingly.
( e )
S01BEST__ S02______ S03_____
S04______ S05______ S06_____
S07______ 08______ 09_____
EDIT PROGRAM
press V+ or V- button to adjust program number.
Press P+ or P- button to select BAND item.
Press V+ or V- button to select V/UHF or CABLE.
Press P+ or P- button to select CHANNEL item.
Press V+, V- or digital button to select channel number.
If the program is desirable, press INSERT or REPLACE button
on the remote controller and the program will be stored under
the current program number.
Press EXIT for exiting.
5 SWAP
When watching the TV program, press the SWAP button on the remote controller and the current TV program
will be rapidly switched to the TV program which was previously watched.
Change the program number: Press P+ or P- repeatedly to change the number of the program from 01 to 99.
Edit the program name: Press V+ or V- to select the position of the cursor. The black cursor is the editing position.
Press P+ or P- to change the cursor from 0 to 9 then from A to Z repeatedly.
For example, move the program 06 to the position of 01 and change the name of the program to BEST:
Press MENU. Press P+ or P- to select EDIT of TV SETUP menu.
Press Menu button and the menu(e) appears on the screen.
Press P+or P- button to select the group of programs containing program 06.
Press V+ or V- button to move the cursor to 06 and the number 06 becomes yellow. Press Menu button to
confirm. The number 06 becomes black and cursor position becomes yellow.
Press P+ or P- to change 06 to 01.
Press V+ or V- button to remove the cursor to the first bar. Then 01 becomes yellow and the first bar
becomes black. Press P+ button until B appearing.
Repeat the above steps to set the following bars for E,S,T. Press Exit button to exit. Thereby Program 06
becomes Program 01. P1 BEST will display when the Channel is switched.
MANUAL SCAN
INSERT REPLACE
SYSTEM B/G
STORAGE P1
BAND V/UHF
CHANNEL 2
UP DOWN LEFT RIGHT EXIT
11
PICTURE
BRIGHTNESS
CONTRAST
COLOR
SHARPNESS
TEMPERATURE
RECALL
50
50
50
50
Normal
Press MENU button
Press P+ or P- button to select PICTURE menu, the
image (i) will appear on the screen and press MENU
button to confirm.
Press P+ or P- button to select the item, then press
V+ or V- to increase or decrease the value of item.
BRIGHTNESS change the brightness of the image.
CONTRAST change the contrast of the image.
COLOR change the color of the image.
SHARPNESS change the sharpness of the image.
TEMPERATURE change the color temperature of the
image.
RECALL- recover the factory setting.
Press EXIT button to exit the menu.
X. How to adjust the image effect
PICTURE
BRIGHTNESS
CONTRAST
COLOR
HUE
SHARPNESS
TEMPERATURE
RECALL
50
50
50
50
50
Normal
Press MENU
Press MENU
XI. How to adjust the sound effect
Press MENU button
Press P+ or P- button to select SOUND menu, the
image (k) will appear on the screen, then press MENU
button to confirm.
Press P+ or P- button to select the item, and press MENU
to confirm then press V+ or V- button to increase or
decrease the value or select the status.
SOUND
VOLUME
BALANCE
SOUND MODE
20
0
AVC
Off
NO DATA
100 100 100 100
6 How to use the function of teletext
Start-up
Press TEXT button on the remote controller and the
image (f) will appear on the screen. It means that the
function of teletext starts.
Press TEXT
.
button on the remote controller repeatedly and the
image of teletext will change accordingly. Teletext TV
Page turning
Press the P- or red button to turn to the previous page.
Press the P+or green button to turn to the next page.
Press yellow button, the content under item on the yellow bar will appear on the screen.
Press blue button, the content under item on the blue bar will appear on the screen.
Press digit buttons 0 to 9 to select the desirable page. For example, press 2,0,8 to select the page 208.
Special function of teletext
Press ? Button to reveal.
Press button to hold the current teletext on the screen.
Press i button to display the table of contents of teletext.
Press button to switch the size of teletext.
NORMAL
Note:
Item HUE will be available only when the input signal
is in NTSC mode.
There is a PICTURE shortcut button on the remote
controller to let you quickly adjust Brightness etc.
MENU UP DOWN EXIT
MENU UP DOWN EXIT
MENU UP DOWN EXIT
9
12
10
XII. The adjustment of MISC
MISC includes the adjustment of video size, OSD
sheet, OSD position, etc.
Press MENU button.
Press P- or P- button to select MISC menu, the
image (n) will appear on the screen, then press MENU
button to confirm.
Press P+ or P- button to select the item, then press
V+ or V- button to select the status of item.
VIDEO SIZE Fill Screen Fit Aspect TV Mode
Letter Box Letter Box Title Auto Fill Screen
( Pressing the V-SIZE shortcut button on the remote
controller has the same function.)
OSD SHEET Translucent Opaque Translucent
OSD POSITION
Press EXIT button to exit the menu.
OSD LANGUAGE:
German Dutch Portuguese English
Italian Spanish French
FILM MODE Film Video Film
MISC
VIDEO SIZE
OSD SHEET
OSD POSITION
FILM MODE
Fill Screen
Opaque
Video
OSD LANGUAGE
English
MISC
VIDEO SIZE
OSD SHEET
OSD POSITION
FILM MODE
Fill Screen
Opaque
Video
OSD LANGUAGE
English
When the signal input status is AV Scart
AV1, A 2, S-Video , the menu is (m),
instead of (k).
Note:
SOUND
VOLUME
BALANCE
SOUND MODE
20
0
NORMAL
AVC
Off
UP DOWN LEFT RIGHT EXIT
EQUALIZER
120Hz 0
500Hz 0
1.5KHz 0
5KHz 0
10KHz 0
SPATIAL 50
VOLUME change the sound volume
BALANCE change the balance of the left sound track
and right sound track ( 0 is the balance point)
SOUND MODE: Normal Cinema News Flat User
Normal
( Pressing the shortcut button on the remote
controller has the same function.)
MENU
AVC Automatic volume control (limiting sound
volume)
Press EXIT button to exit the menu.
SOUND
When SOUND MODE is set at USER, select
EQUALIZER item for desirable sound. Press ,
image(l) will appear on the screen. Use P+ or P- to
select the item, V+ or V- to adjust the value
Note: When the signal input status is AV Scart, AV1 ,
AV2, S-Video , the menu is (o), instead of (n) .
Analog RGB and DTV modes have no Film
Mode item.
MENU UP DOWN EXIT
MENU UP
DOWN
EXIT
MENU UP
DOWN
EXIT
10
13
XIII. How to set time, sleep time and wake up time
(1) Sleep time setting
Press button.
Press P+ or P- button to select TIME menu, the image
(p) will appear on the screen, then press button to
confirm.
Press P+ or P- button to select the SLEEP item and press
MENU to confirm. Then press V+ or V- button to select time.
MENU
MENU
(3) Time setting
Press P+ or P- button to select TIME item .
Then press button to confirm. Image ( r ) will
appear on the screen.
Press P+ or P- button to select hour or minute.
Press V+ or V- button to set time.
Press EXIT button to exit the menu.
in image (p)
MENU
Off 30Min 60Min 90Min 120Min
180Min Off
( Pressing the SLEEP shortcut button on the remote
controller has the same function.)
TIME
SLEEP
WAKE UP
TIME
Off
WAKE UP
Off
LEFT RIGHT EXIT
Press P+ or P- button to select WAKE UP
item Then press button to confirm.
Image (q) will appear on the screen.
Press V+ or V- button to set the content of the item.
WAKE UP: Everyday Once Off
Press EXIT button to exit the menu.
in image(p). MENU
12:27
TIME
UP DOWN LEFT RIGHT EXIT
Connect the YPbPr output of the DVD player or SET-TOP BOX with Y Pb/Cb Pr/Cr INPUT of the set.
Press the TV/AV button on the remote controller or on the panel to select DTV input status and receive
YPbPr signal.
Connect the YCbCr output of the DVD player or SET-TOP BOX with Y Pb/Cb Pr/Cr INPUT of the set.
Press the TV/AV button on the remote controller or on the panel to select Component input status and receive
YCbCr Signal.
(2) Wake up function
Press MENU
Press MENU
XIV How to receive DTV(YPbPr)/Component(YCbCr) signal
MENU UP DOWN EXIT
14
XV Adjustment of image display under Analog RGB(PC)/DTV(YPbPr) input status
Press MENU button.
Press P+ or P- button to select PICTURE menu,
the menu (s) will appear on the screen, then press
MENU button to confirm.
Press P+ or P- button to select item and press MENU
to confirm, then press V+or V- button to change the
value of the item.
BRIGHTNESS- Change the brightness of the image.
CONTRAST- Change the contrast of the image.
Press EXIT button to exit the menu.
Press P+ or P- button to select TEMPERATURE
item in menu (s) . Then press V+ or V- button
to change the item content.
Cool Normal Warm User Cool
When selecting User , the menu (t) will appear on
the screen. Then press P+ or P- button to select
RED, GREEN or BLUE item. Press V+ or V-
button to increase or decrease the values of the items
respectively.
Press EXIT button to exit the menu.
1 The adjustment of brightness and contrast
Press P+ or P- button to select POSITION item in
menu (s), then press MENU button to confirm, the
menu (u) will appear on the screen.
Press P+ or P- button to select the item, then press
V+ or V- button to increase or decrease the
value of the item.
H-POSITION: change the horizontal position of the
image.
V-POSITION: change the vertical position of the
image.
PHASE change the phase of the image to improve
the image quality.
H-SIZE: change the horizontal width of the image.
When selecting AUTO ADJUST item, pressing
MENU button can automatically adjust the image to
the best status(only under analog RGB status).
Press EXIT button to exit the menu.
Note: Sometimes the DTV image is not at the center, please follow the procedures above to adjust the position.
2 Adjust the color temperature of the image
3 Adjust the image position, phase, H-SIZE, and auto
adjust
BRIGHTNESS
CONTRAST
TEMPERATURE Normal
POSITION
Press MENU
PICTURE
50
50
BRIGHTNESS
CONTRAST
TEMPERATURE User
RED
GREEN
BLUE
POSITION
PICTURE
50
50
50
50
50
Press MENU
H-POSITION
V-POSITION
PHASE
H-SIZE
AUTO ADJUST
POSITION
50
50
52
50
Press MENU
MENU UP DOWN EXIT
MENU UP DOWN EXIT
MENU UP DOWN EXIT
11
11
15
XVI. The PIP function under Analog RGB(PC)/DTV(YPbPr) input status
Press MENU button.
Press P+ or P- button to select PIP menu, the
image (w) will appear on the screen, then press
MENU button to confirm.
Press P+or P- button to select the item. Select PIP
ON/OFF item, then press V+ or V- button to select
PIP ON.
Press EXIT button to exit the menu.
PIP ON/OFF PIP off PIP on PIP off
(The PIP shortcut button on the remote controller has
the same function.)
PIP SOURCE TV AV Scart AV1 AV2
S-Video TV
AUDIO SOURCE MAIN PIP MAIN
PIP POSITION
XVII STILL control
XVIII. MUTE control
Press the STILL button on the remote controller, the current image becomes still . Press the STILL button
again or wait 20 seconds, the still image will be released.
Press the MUTE button on the remote controller, the unit becomes mute .
Press the MUTE button again, the sound can be restored.
PIP
PIP ON/OFF
PIP SOURCE
AUDIO
PIP POSITION
SOURCE
PIP off
TV
PIP
XIX. Troubleshooting
If there is any abnormal situation during the operation, please make the corresponding check according to the
following instruction before sending it for repair.
No raster
Interference of the image
and sound
Check the connection of the power cord.
Check if the power switch is On .
Check if the unit is under stand-by status.
Check if the signal source has normal output under the current play status.
Pull off the power plug and switch on after 2 minutes.
Check the direction, location and connection of the antenna.
Check if the signal is interfered under the current play status .
Check if there is any interference by the electric apparatus nearby .
Check if the power of the unit and the signal source is stable .
Check if the grounding of the signal cable is good .
Check if any of the buildings nearby reflects the radio wave.
(Power indicator is red)
The intensities of TV signals in different areas are different. If the image of TV program received through RF
is not clear, please use AV OUT or S-VIDEO OUT on SET-TOP BOX to receive it.
MENU UP DOWN EXIT
1212
16
No image and sound
Check if the power cable is connected .
Check if the signal source has normal output under the current play status.
Check the brightness and contrast of the image and check if the volume setting is correct.
If it is under stand-by status.
Check if the sound has been input correctly.
Check the volume setting.
Check the MUTE setting.
Check the color setting.
Check if the signal source has normal output under the current play status.
Check the contact and pole of the batteries in the remote controller , or change the batteries.
Clean the transmission window of the remote controller and the receiving window of this unit.
Image is normal, but
there is no sound
Others
The image has no color
The remote controller does
not work
Check if there is any obstacle between the transmission window of the remote controller and the Remote sensor of this unit.
Although the image and sound are normal, there could be noises sometimes with the change
of the channel and signal sources. It is normal .
Attached table 1
HDTV input support
Attached table 2
Note: Do not uncover the back cover at you own will.
A few of constantly illuminated or off pixels could be found on the image due to manufacturing
engineering of the screen. It will not affect your watching.
PC input support
RESOLUTION
REFRESH FREQUENCY
MODE
H-Freq.(kHz)
31.5
37.5
43.3
2
37.9
48.1
46.9
53.7
48.4
7
85
X
X
X
X
X
X
X
X
X
X
X
X
X
75
56.5
60.0
68.3
64.0
80.0
Note: The image is the best when your PC is at X format.
X
X720(720p)
720X480 (480i)
720X576 (576i)
720X480 (480p)
720X576 (576p)
60Hz
60Hz
60Hz
50Hz
60Hz
50Hz
SPW2.025.347 SS
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gericom GTV2610 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gericom GTV2610 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Gericom GTV2610

Gericom GTV2610 Gebruiksaanwijzing - Nederlands - 18 pagina's

Gericom GTV2610 Gebruiksaanwijzing - Deutsch - 18 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info