4 - 8
Owner's Manual
Edit Section
Disk & SRam
5 LOAD ALL SAMPLES
This operation loads all the Samples contained in the inserted DISK (up to a maximum
of 48), provided that the instrument is fitted with the optional Sample RAM
1
. The
samples will occupy the SAMPLES family Banks from 3 to 8.
The procedure is the same as for Load All Disk.
LOADING SAMPLES FROM THE S-SERIES DISKS:
If you have some disks belonging to the S-Series instruments (GEM/Generalmusic S2,
S3) which contain samples, you can load these into the WX using the standard Load All
Samples
2
or Load Single Sample operations.
LOAD BANK MODE
1. LOAD A SINGLE BANK OF STYLES (Programmable)
This operation loads a Bank containing up to 8 Programmable Styles (Bank 1 =
Style 1, Bank 2 = Style 2 and so on..).
1.1 Confirm the operation with ENTER.
After a short period, a new display appears showing the disk contents on the left
side and on the right, the Memory contents.
1.2 Use the Up/Down cursor arrows and the Dial to select the Bank to transfer
into Memory (at this point you can also opt to load the Style Performance
Banks - see “Style Performance option” on the next page).
NOTE 1:
WX instruments have a
2 Megabyte RAM which
houses the user-
programmed Songs and
Sounds. If you want to
load Samples, you must
fit the WX with the
optional 2 Megabyte
Sample RAM.
NOTE 2:
As samples tend to be
quite large in terms of
Memory, unless you
require all the samples
on disk, you are advised
to load only the ones
required one at a time,
in order to reduce the
long loading times.
Note the “STYLE”
message
