27
Turn the water
On
at the shutoff valve.
Tighten any connection that leaks.
Replace the access cover and tighten all screws
(on some models).
Turn the Water On
Plug in the refrigerator to the Power Outlet
and turn
On
.
IMPORTANT:
Always operate the
Refrigerator from a power source of the same
Voltage, Frequency and Rating as indicated on
the Refrigerator Identification Plate. Operate the
Refrigerator from an Earthed (Grounded) 3 Pin
Power Outlet fully accessible when the refrigerator
is located in its normal operating position.
Arrange the coil of tubing so that it does not
vibrate against the back of the refrigerator or
against the wall.
Push the refrigerator back to the wall making sure
the power cord and the water line tubing are not
trapped, entangled or squashed by the refrigerator
(including the wheels) or wall.
Plug In the Refrigerator
Set the icemaker power switch to the
I
position.
The icemaker will not begin to operate until it
reaches its operating temperature of -9° C or below.
It will then begin operation automatically if the
icemaker power switch is in the
I
position.
NOTE:
In lower water pressure conditions, the water
valve may turn on up to 3 times to make sure
enough water reaches the icemaker.
Start the Icemaker
Power
switch
