646533
1
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
Dryer
Contents
Appliance Registration
2
Problem Solver
10-12
Automatic Drying
5
Safety Instructions
3,4
Care and Cleaning
13
Sorting 4,8
Consumer Services
15
Storing Dryer
13
Controls Setting Guide
6,7 Timed Drying
5
Dryer Exhaust
13
User Maintenance Instructions 13
End-of-Cycle Signal
5
Warranty
Back Cover
Energy-Saving Tips
9
Extra Care Cycle
4
Knits Drying Tips
5-7, 11
Light Bulb Replacement
13
Lint Filter
4,9,
13
Loading
4,9
Model and Serial Numbers
2
operating the Dryer
4,5
GEAmwer
Center
m
Perm.
Press Drying Tips 5-7, 11, 12
80~6262000
Models
DDE8506M
DDG8586M
DDE8508M
DDG8588M
GEAppiances
Help us help you...
If You Need Service
Before using your dryer,
read
thh
book carefully.
It is
intended to help you operate and
maintiin your new dryer properly.
Keep it
handy for answers
to your
questions.
If you don’t understand something
or need more help, write (include
your
phone
number):
Consumer Affairs
GE Appliances
Appliance Park
Louisville,
KY40225
If you received a
damaged dryer...
Immediately contact the
deder
(or
buildeF)
that sold you the
dryer.
Save time and money.
Before you request service...
check the Problem Solver on
pages 10-12. It lists causes of
minor operating problems that
you can correct yourself.
Wri@
down
the
model
and serial
numbem.
You’ll
find them on a label on the
front of the dryer behind the door.
These numbers are also on the
Consumer Product Ownership
Registration Card that came with
your dryer. Before sending in this
card, please write these numbers
here:
Mdel
Number
Serial Number
To obtain a Spanish language
version of this book, call
GE Answer Center”
800.626.2000
consumer information service,
Para
obtener
la version en
espafiol
de
este
manual,
name a
GE Answer
Center?
servicio
de information
para
el
consumidor,
te16fono
800.626.2000.
FOR YOUR SAFETY
If you smell gas:
1. Open windows.
2. Don’t touch
electrical
switches:
3. Extinguish any
open flame,
4. Immediately call
your gas supplier.
Don’t turn electric switches
on or off because
sparh
may
ignite the gas.
FOR YOUR SAFETY
Do not store or use
gasoline or other
flammable vapors and
liquids in the vicinity
of this or any other
appliance.
Use these numbers in any
correspondence or service calls
concerning your dryer.
All drying instruction terms in this book conform to the Care Labeling
Rule established by the Federal Trade Commission, January 1984.
2
To obtain service, see the
Consumer Services page in the
back of this book.
We’re proud of our service and
want you to be pleased. If for some
reason you are not happy with the
service you receive, here are three
steps to follow for further help.
FIRST, contact the people who
serviced your appliance. Explain
why you are not pleased. In most
cases, this will solve the problem.
NEXT, if you are still not pleased,
write all the details-including
your phone number—to:
Manager, Consumer Relations
GE Appliances
Appliance Park
Louisville, Kentucky 40225
FINALLY, if your problem is still
not resolved, write:
Major Appliance
Consumer Action Panel
20 North
Wacker
Drive
Chicago, Illinois 60606
WPO~~T
S~ETY~STRUCTIONS
-
Readallinstructions
before
usiWthisappliance.
I
-
MPORT~T
S~TY
N~ICE
The
Crdifornia
Safe Drinking
Water and Toxic Enforcement Act
requires the Governor of California
to publish a list of substances
known to the state to cause cancer,
birth defects or other reproductive
harm and requires businesses to
warn customers of potential
exposure to such substances.
Gas appliances can cause minor
exposure to four of these substances,
namely benzene, carbon monoxide,
formaldehyde and soot, caused
primarily by the incomplete
combustion of natural gas or
LP
fuels. Properly adjusted dryers will
minimize incomplete combustion.
Exposure to these substances can
be minimized further by properly
venting the dryers to the outdoors.
-
W~NG—TO
reduce the risk
of fire, electric shock, or injury
to persons when using your
appkcq
fouow
basic precautions,
including the following:
Use
this appliance only for its
intended purpose
as described in
this Use and Care Book.
.
This dryer must be properly
installed and located in
accordance with the Installation
Instructions before it is used.
If
you did not receive an Installation
Instructions sheet with your dryer,
you can obtain one by contacting
the service location nearest you.
—Properly ground to conform
with
all
governing codes and
ordinances.
Follow
details in
Installation Instructions.
—hcate
where the temperature
is above
50°F.
(lO°C.)
for
satisfactory operation of the
dryer control system. Do not
install or store the dryer where it
will be exposed to the weather.
—Connect to a properly rated,
protected and sized power-supply
circuit to avoid electrical overload.
—Exhausting to the outside is
STRONGLY RECOMMENDED
to prevent large amounts of
moisture and lint from being blown
into the room. Carefully follow the
Exhausting
Detis
in
the
hs~ation
Instructions.
When disconnecting this
appliance pull by the plug rather
than the cord to avoid damage to
the cord or junction of cord and
plug. Make sure that the cord is
located so that it will not be stepped
on, tripped over or otherwise
subjected to damage or stress.
Do not repair or replace any
part of the appliance or attempt
any servicing unless specifically
recommended in this Use and
Care Book or in
pub~hed
user-
repair instructions that you
understand and have the
skills
to
carry out.
To
minimtie
the
possibtiity
of a fire
h~rd.
Do not use heat to dry articles
con@ining
rubber, plastic, or
similar
materi~s
(such as padded
bras, tennis shoes, galoshes, bath
mats, rugs, bibs, baby pants,
p-
bags, etc.) as
thae
materials may
melt or burn. Also, some rubber
materkds,
when heated,
can
under
certain circumstances produce
fire by spontaneous combustion.
Garments labeled “Dry Away
From Heat” (such as life jackets
containing Kapok) must not be put
in your dryer.
Do not wash or dry articles
that have been cleaned in, washed
in, soaked in, or spotted with
combustible or
explmivesubstances
(such as wax, paint, gasoline,
degreasers,
dry<leaning
solvents, kerosene, etc.) which
may ignite or explode.
Do
not
use
or store such substances on/or
around your washer and/or dryer
during operation.
Any article on which you have
used a cleaning solvent, or which
contains flammable materials
3
(such as cleaning cloths, mops,
towels used in beauty salons,
restaurants or barber shops, etc.)
must not be placed
in or
near the
dryer until
dl
traces of these
flammable liquids or solids and
their fumes have been removed,
There are many highly flammable
items
usd
in homes such as:
acetone,
denaturd
rdcohol,
gasoline, kerosene, some
household cleaners, some spot
removers, turpentines, waxes, wax
removers and products containing
petroleum distillates.
.
Clm
the
tint
fi]~r
~o~
~~
load to prevent
Unt
accumtiation
inside the dryer or in the room.
DO
N~
OPERATE
~
DR~R
WI~OUT
~
L~T
~TER
~
PLACE.
Keep area
around
and
underneath your appliance free
from the
accumtiation
of
combustible materials, such as
lint, paper, rags,
chemicrds,
etc.
Do not store items that may burn
or melt (such as clothing, paper
material, plastics or plastic
containers,
etc.)
on top of the dryer
during operation.
The interior of the machine
and the
=haust
duct connection
inside the dryer
shodd
be
cleaned periodically by a
quatified
individd.
Exhaust duct (see
insta~ation
instructions). Use only
me~
duct inside dryer or for
exhausting dryer to the outside.
To
minimh
the
possibfity
of i~ury.
Never reach into the dryer
w~e
the
drum
is moving.
Befwloading,
unloading or adding clothes, wait
untti
the drum has completely
stopped.
cl~e
supervision is n~essary
if this appliance is used by or near
children. Do not allow children to
-
safety
Instructions
(continued)
hportant
play inside, on or with this
appliance or any discarded
appliance. Dispose of discarded
apptiancm
and shipping or packing
materials properly. Before
discarding a dryer, or removing
from service, remove the door
of the drying compartment.
Keep all laundry aids (such
as detergents, bleaches, fabric
softeners, etc.) out of the reach of
children, preferably in a locked
cabinet. Observe all warnings on
container labels to avoid personal
injury.
Keep the floor around your
appliances clean and dry to reduce
the possibility of slipping.
Q
Do not dry fiberglass articles in
your dryer. Skin irritation could
result from the remaining
glass
particles that may be picked up
by clothing during subsequent
dryer uses.
. The laundry process can reduce
the flame
retardancy
of fabrics. To
avoid such a result, the garment
manufacturer’s care instructions
should be followed very carefully.
Q
Never climb on or stand on the
dryer top or door.
.
Do
not tamper with
controb.
To minimize the possibility
of electric shock, unplug this
appliance from the power supply
before attempting any maintenance
or cleaning (except the removal and
cleaning of the lint filter).
N~E:
Turning the Cycle Selector knob
to an OFF position does
N~
disconnect the appliance from
the power supply.
Do not operate this appliance
if it is damaged, malfunctioning,
partially disassembled, or has
missing or broken parts, including
a damaged cord or plug.
If yours is a gas dryer, it is
equipped with an automatic electric
ignition and does not have a pilot
light. DO
N~
ATTEM~
~
LIGHT WITH A
MAKH.
Bums
may result from having your hand
in the vicinity of the burner when
Dryer-applied fabric
sotiners or anti-static
conditioned
You may wish to soften your
laundered fabrics or reduce the
static electricity in them. We
reeommend
you use either a
fabric softener in the wash cycle,
according to the manufacturer’s
instructions for those products, or
try a dryer-added product for
which the manufacturer gives
written assurance on the package
that their product can be safely
used in your dryer.
Service or performance problems
caused by the use of these products
are the responsibility of the
manufacturers of those products
and are not covered under the
warranty of this appliance.
SAW
T~SE
the automatic ignition may turn on.
How to
opemte
your dryer
WA~ING—To
reduce the risk of fire, electric shock, or
iniurv
to
~ersons,
read the IMPORTANT SAFETY INSTRUCTIONS before
operkting
this appliance.
~STRUCTIONS
had
Your Dryer Properly
Clean the lint filter each time the
sorted right for drying. See page 8
dryer is used. Always be sure the
for sorting help. (If you do mix
lint filter is in place. Don’t use the various types of fabrics in your
dryer without it.
load, set the controls for the
Set the
Controh
See the Controls Setting Guide
on pages 6 and 7.
lighter-weight fabrics and remove
Good sorting for the dryer begins
at the washer. Generally, if clothes
when dry. Reset controls for the
are sorted right for washing, they’re
remaining heavier fabrics.)
4
~Fabric
Care Selections
Push a button to select the proper heat for your load.
Should be used with cycles indicated
Automatic,
Fabric Care
Automatic
Perm Press and
Selections
Timed
Regular Cycle
Knits Cycles
Cycles
Cottons
High
Heat
Perm
Press
Medium Heat
Knit#Delicates
Low Heat
Fluff
No Heat
~
Extra Care Cycle
(Operates only with Automatic,
Perm Press& Knits Cycles.)
Turn to ON if desired. To minimize
wrin~es
set in the clothes, the Extra
Care
cycle
provides approximately
15
minutes of no-heat tumbling
after the clothes are dry.
Use End-of-Cycle Signal. Signal
will sound at five-minute intervals
to remind you to remove the clothes.
What is the difference
between
~med
&
Automatic drying?
Timed Drying
When using the TIMED CYCLES,
you select the number of minutes
you wish the dryer to run and it
turns off at the end of this time
period.
,,
J,
~&,k’fi;~$,(vol.
Automatic Dryin$,.
~.i.
1
When using
the~tomatlc
Cycles,
the
~
.~continually
senses the
~
Select
EndofCycle
Signal, if
.+~~
~
~ti
tumbling clothes,
desired. (See below.)
~.~
tinss.
when.they
are dried to
(,
~W
,$~-lected
setting, and
~
Turn Cycle Selector
todesired’’L(P.\
t~.
the
cycle
automatically.
cycle setting. The selector may be
~~’
~A~’Refer
t.
tie
CONTROLS
SETTING
turned in either direction.
~~,
w
GUIDE for recommended settings.
I-
jdj
The Cycle Selector will not advance
~
Press PUSH TO START button;)}
to start dryer. (Opening the door
until clothes have reached a certain
during operation stops the dryer. To
degree of dryness.
re-start,
close the door and press
the START button. )
Dryness selections guide for
the automatic cycles
End-of-Cycle Signal
(Operates with any cycle.)
MED
The
Signal
control can be set
anywhere between OFF and
LOUD, depending on desired
sound level. The signal will sound
just before the end of the cycle to
remind you to remove the clothes.
To stop signal while sounding, turn
Signal control to OFF or advance
Cycle Selector to OFF.
The Signal should always be used
when drying Polyester Knits or
Permanent Press items which
should
be removed as soon as the
dryer stops to help prevent setting
of wrinkles.
The signal should also be used with
the Extra Care Cycle.
Polyester
~ib
&
Permanent Press
drying tips
DO
N~
OVERLOAD—
Garments being dried or
dewrintied
should tumble freely.
REMOVE CLOTHES
PROM~LY—To
help prevent
wrin~ing,
remove from the dryer
promptly at the end of the drying
cycles.
Q
PLACE ON
HANGERS—
Permanent Press and Polyester
Knit garments look best if placed
on hangers after drying.
5
Set to Middle Position
,,,,
OFF
0“” .
.*
.*
.0”,
,,”
.*
Q
For most normal loads.
Set toward MORE DRY
u,,
OFF
,“”
,
..*
s
~wu.e+
For loads that include heavy-
weight fabrics.
If you desire to remove more
moisture.
Set toward LESS DRY
(,$,
OFF
,,”
.
.S
.+
MOR<
4
OR”
@
For lightweight fabric loads.
If you desire to remove less
moisture.
. For very small loads.
Controk
Setting Guide for different fabrics and loads
Fabric Care/
Drying Selection*
bad
Cycle
Cycle Setting
See Dryness Selection Guide on page 5.
Cottons &
Linens
Cottons
High Heat
Automatic Regular Cycle
or
Timed Cycle Set at REGULAR for dry; at DAMP-
DRY for ironing.
Perm Press
Medium Heat
Permanent Press, Treated Cottons,
Blends with Cotton
Automatic Perm Press
and Knits Cycle
Timed Cycle
See Dryness Selection Guide on page 5.
Use Extra Care Cycle if desired.
DE-WWNKLE setting to de-wrinkle
garments that have not been washed.
Automatic Pcrm Press
and Knits Cycle
Synthetics—Polyester, Nylon,
Acrylic Knits and Woven Fabrics
Sturdy
See Dryness Selection Guide on page
5.
Use Extra Care Cycle if desired.
Perm Press
Medium Heat
Knits/Delicates
Low Heat
Delicate
Silks and Wools, Blends including
Silks and Wools
Knits/Delicates
Low Heat
Automatic Pcrm Press
and Knits Cycle
Set
toward
LESS DRY. See Dryness
Selection Guide
on
page
5.
Rayon and Acetate
Knits/Delicates
Low Heat
Cottons
High Heat
Automatic Perm Press
and Knits Cycle
Set toward LESS DRY. See Dryness
Selection Guide on page 5.
Down-filled garments, if
macbine
washing and drying are
recommended.
Automatic Regular Cycle
Scc
Dryness Selection Guide on page 5.
Baby Clothes—Sturdy: Diapers,
Nightgowns, Shirts, Pads, Sheets,
Receiving Blankets, Coveralls. See
Cottons
High Heat
Automatic Regular Cycle See Dryness Selection Guide on page 5.
Special Instructions.
Baby Clothes—Delicate
Knits/Delicates
Low Heat
Automatic Perm Press
and Knits Cycle
See Dryness Selection Guide on page 5.
Blankets—Wool, Part Wool,
Cotton, Electric, Synthetic. See
below under “Extra-large
Items!’
Cottons
High Heat
Timed Cycle
Set at 20
to
25 minutes.
Curtains, Slipcovers, Draperies.
DO NOT MACHINE DRY
FIBERGLASS.
Cottons
High Heat
Timed Cycle
For first setting, set at 20 minutes;
for
second
setting. set at 15 minutes
Timed Cycle
Timed Cycle
Chenille Bedspreads, Robes. See
below under “Extra-large
Items:’
Rubber-coated Items, Laminated
Fabrics, Vinyl, Plastics and
Articles with Plastic Trim.
Bathmats and Rugs
First setting—20 minutes;
additional settings—5 minutes.
Set
for
time desired.
Cottons
Higb Heat
Fluff
No Heat
Timed Cycle
Cottons
High Heat
First setting—20 minutes;
additional settings—5 minutes.
Extra-large Items—Queen or King
Size Sheets, Blankets or Spreads,
Sleeping Bags, Insulated Jackets or
Suits, Mattress Covers (Pads),
Quilted Bedspreads.
Permanent Press
Medium Heat
Timed Cycle
First setting—20 minutes;
second setting—15 minutes;
additional settings—5 minutes.
Pillows—Feather and
Polyester-
filled (if manufacturer recommends
they be dried in a dryer). See
Cottons
High Heat
Timed Cycle Set at 70 minutes.
Special Instructions.
Vbe
terms Higb, Medium and Low Heat are those usually found on fabric care labels. For best results, follow your fabric care labels.
N~E:
The Cycle Selector settings indicated above are to be used as a guide. You may find that best results arc obtained for certain of your fabrics
by setting the Cycle Selector to either side of the recommended settings.
6
S~ial
Instructions
Do not dry non-colorfast items with whites or light-colored items.
Do not overload dryer; clothes should tumble freely. Remove promptly as soon as dryer stops; place clothes on hangers to
minimize wrinkling.
Do not overload dryer; clothes should tumble freely. Remove promptly as soon as dryer stops, place clothes on hangers to
minimize wrinkling.
Dry silks and wools in your dryer only if recommended by the garment manufacturer. Follow instructions carefully.
Tumble drying is mandatory. Down must be thoroughly dried to remove odor and prevent mildewing. Place two large, dry towels in the
dryer to improve tumbling and shorten drying time. Be sure to dry thoroughly.
IMPORTANT. If children’s
sleepwear is made of
Modacrylic,
tumble dry only on Low Heat. High Heat can damage these fabrics.
Check manufacturer’s drying instructions.
See above instructions.
Place in dryer with 3
or
4 dry towels which have been heated for 5 minutes. Set timer for 20 to 25 minutes. Do not set control for more than
25 minutes. Do only one blanket at a time. Remove blanket at end of cycle and block blanket back to original shape. Press binding with warm
iron. Allow to dry before storing.
Use dry towels as buffers. Set timer for 20 minutes. If items are still wet, reset for 15 minutes and check again. Items should be removed while
still damp. Place slipcovers on furniture immediately. Hang draperies and curtains so that creases will fall out. Stop dryer periodically and check
filter for excess lint. Remove and restart dryer.
Tumble on FLUFF (No Heat) setting as heat may cause alteration in shape, color and appearance of such articles.
Stop dryer periodically and check filter for excess lint. Remove and restart dryer.
Speciu/precaution.r must be taken for extra-large items. Set dryer for
20minutes
then check
carefilly
Set 15 minutes for second setting, check
again; and 5 minutes for each additional setting. Make sure that article does not fill drum. Many large articles, when wet, have ample room in
dryer, but as they dry and fluff up may not have room to tumble. Check carefully every few minutes and if article is still wet or damp and fills
dryer, finish drying on line. Do not, under any circumstances operate dryer for longer times without checking. CAUTION: If large items do not
have room to tumble, the air flow may be blocked which could result in scorching your valuable items. Many large items, like shag rugs, cannot
be dried in home size dryers. DO NOT fumble
d~jackets
containing Kapok. (See filter cleaning instructions above.)
Check ticking for holes or weak seams where feathers or filling could escape. Dry no more than one
pillow
at a time and set dryer for maximum
time. Stop dryer occasionally and shake pillows to redistribute filling for more even drying. Check pillows at end of drying time. If they are not
completely dry, return them to dryer and reset for more drying time. Feather pillows dry very slowly and must be dried completely to prevent
mildewing.
DO NOTtumb[e dry pillows containing
ffipok.
Refer to Garment Manufacturers’ Care
bbels
For more information
on
care labeling, send for “What’s New About CARE LABELS?’
For sale by the Superintendent of Documents, U.S. Government Printing Office, Washington,
D.C.
20402.
7
How to sort the clothes
Normally, if you have sorted clothes correctly for washing,
you will also have properly sorted drying loads.
Sort by surface
tetiure
from
LINT PRODUCERS—such as
terry toweling and chenille—give
up lint. LINT
COLLE~RS—
such as man-made fibers and
napped fabrics like velveteen and
corduroy—attract lint, and must be
dried separately.
Sort by fabric
from
m
,,
y;
.
i
Synthetics, ,
‘,
Blends &
/
I;Poly
Knits
/(
from
from
\Delicates{
In addition to sorting to reduce lint
collection, it is recommended that
fabrics of similar construction be
dried together whenever possible.
Sort by color
from
\,,
Lights{
from
\,,
Darks~
from
Sort by
wei@t
Sepal
m
‘ate
Heavy Items
i
, (such as
‘ towels)
2
from
For information on tumble drying
extra-large items and different
fabrics and loads, see pages 6 and 7.
8
How to load the
clothes
Don’t overload your dryer.
Crowded loads don’t dry efficiently
and clothes may be unnecessarily
wrinkled.
Loads should look like this:
Drum with
Permanent Press Load
Drum with
Cottons & Linens
Clean the lint filter before
dryi~
every load.
Clean lint filter (see shaded area)
by putting your moistened fingers
at the corner of filter and wiping in
a downward motion all the way
across to the other corner.
For additional information on lint
filter, see page 13.
Ene~y-Saving
~ps
Q
Sort clothes by weight so you won’t
To help prevent ironing, use
Clean dryer lint filter each time
have to run an extra
cycle
for one or
Perm
Press Medium Heat or
you dry.
two heavier,
slower-d;ying
items.
See page 8.
Do not overload dryer. For
efficient drying, clothes need to
tumble freely.
. Use Automatic Drying Cycles
Knits/Delicates
Low Heat. Remove
garments promptly at end of drying
Clean dryer exhaust
ducting
at
l-t
cycle and place on hangers.
once a year. A partially clogged
exhaust can lengthen drying time.
. Dry your clothes in consecutive
loads. Using a “warm” dryer will
save energy.
whenever possible to help prevent
overdying and to save energy.
9
-
m
Questiom?
~.
UseThis
Woblem
Solver
-
PROBLEM
POSSIBLE CAUSE AND REMEDY
DRYER WON’T
Dryer unplugged. Make sure power cord is plugged in.
START
No power to dryer. Check fuses and circuit breakers to make sure dryer is getting
current. Most electric dryers use two.
Controls improperly set. Make sure controls are set and START switch is pushed.
Opening the door during operation stops the dryer. Tore-start, close the door and push
the START switch.
. Dryer door is open. Close door securely—dryer will not run with door open.
. Circuit is overloaded. Do not operate other appliances on the same electrical outlet
or circuit while the dryer is operating.
CL~HES
TAKE
Controls improperly set. Check all controls to make sure they are correctly set for
~0
LONG
~
DRY
the load you want to dry. See pages 4-7.
c
Clogged lint filter. Remove and clean filter before every load. Periodically clean area
under lint filter with vacuum cleaner. See page 13.
Improper ducting. Make sure dryer is
ducted
in accordance with Installation
Instructions.
Obstruction in exhaust ducting. Make sure ducting is clean and free of obstruction;
make sure damper in outside wall cap operates easily. If flexible ducting is used, be
sure it is not kinked and is properly installed according to Installation Instructions.
. Blown fuses or tripped circuit breakers. Check household fuses or circuit breakers.
Most electric dryers use two. It is possible for one to be blown or tripped and the dryer
still tumble without heat.
Improper sorting. Do not mix heavy, hard-to-dry items with lightweight articles.
c
Large loads of moisture-holding fabrics, such as beach towels, take a long time to
remove moisture.
c
Too many items in dryer. Dry only one washer load at a time. Do not combine loads.
. Too few items in dryer. If drying only one article, add two more similar articles, even
if dry, to insure proper tumbling.
SHNNKAGE,
. Some fabrics will shrink whether machine washed and tumble dried or washed by hand
GENERAL
and drip dried; others may be safely washed but will shrink in a dryer. Follow Garment
Manufacturers’ Care Labels exactly. If in doubt, do not machine wash or tumble dry.
10
PROBLEM
POSSIBLE CAUSE AND REMEDY
SHWNKAGE,
c
Rela~tion shrinkage
can occur in knit fabrics that have been improperly stretched
KNITS
and elongated by the manufacturer. When this occurs, garment maybe
pressed
back into
shape
afier
each wash and dry cycle.
.
Progressive or delayed shrinkage
is caused when starch or sizing (in some fabrics) is
gradually removed by laundering. Maybe noticed in older garments that have&n
laundeti
many times without previous shrinkage.
T~t
as
fir
Relaxation
S-e
above.
Shrinkage cawed by overheating
occurs in certain knit fabrics
that
have been
heat-
shaped. When washing, drying or ironing temperatures exceed the temperatures used to
shape set, shrinkage may occur. This cannot be corrected, but it can
bepreventi
by
washing in cold or warm water; drying on low heat.
WWNKLING
IN
Leaving clothes in dryer after tumbling stops. Remove clothes
prompdy
and hang
PERMANENT PRESS
them immediately.
AND “NO-IRON”
ITEMS
. Too many items in dryer. Dry only one washer load at a time. Do not combine loads.
c
Too few items in dryer. If drying only one article, add two or more similar articles, even
if dry, to insure proper tumbling.
. Improper loads. Avoid laundering heavy Permanent Press items, such as work clothes,
with lighter Permanent Press items, such as shirts or blouses. Do not wash or
dry
Permanent Press with regular laundry.
. Too many clothes in washer. Items must have room to move freely. Permanent Press
loads should always be smaller than regular loads..
.no
more than medium loads.
Use of incorrect wash and dry cycles. Use Permanent Press Wash Cycle which provides
a cool-down rinse to minimize
wrin~ing.
Also, use Permanent Press Dry
Cycle.
Incorrect water level. Use large water level for medium load; medium level or
hdffull
for small load.
c
Washing repeatedly in
too
hot water. Wash in cool or warm
water with plenty of detergent.
I
11
The Problem
Solver
(continued)
PROBLEM
POSSIBLE CAUSE AND REMEDY
WRINKLING IN
Accumulation of lime scale due to use of carbonate detergents. If you must use a
PERMANENT PRESS
non-phosphate detergent, avoid the use of a high-carbonate detergent.
AND “NO-IRON”
ITEMS (continued)
Failure to use fabric softener. Proper use of fabric softener will minimize
wrin~ing.
~
remove wrinkles:
Retumble
on “Permanent Press” setting.
.
Rerinse
and dry on “Permanent Press” setting.
If unsuccessful,
retumble
on
high
heat
for
10-12
minu~s
and hang immediately.
Iron carefully.
Send to dry cleaners for pressing.
Some
wrirddes
may remain which cannot be
removed:
*N~E:
If
you
follow
good
laundry
procedures and Permanent
press
CIOtheS
still
come
out
wrirdded,
the finish may not be good quality. Also, in permanent press synthetic/
cotton blends, the cotton portion of the fabric can eventually wear away leaving only the
synthetic. Since it’s the cotton portion which is treated for Permanent Press, a loss or
decrease of Permanent Press performance will result.
If you need more help.. call, toll free:
GE Answer
Center@
8W.6262W
consumer information service
12
Care and
Cleati~
USER
M~TEN~CE
~STRUCTIONS
God
dryer care
The Drum.
Porcelain enamel
drum is rust-resistant and requires
no special care.
The Exterior.
Wipe off any spills or
washing compounds. Wipe or dust
with damp cloth. Try not to strike
the surface with sharp objects.
The Lint ~lter.
Wipe lint filter
before every use as described on
page 9. Periodically lint filter
should be removed and suction
hose from vacuum cleaner should
be inserted into the opening.
See below.
Do not obstruct the flow of
combustion and ventilating air. The
air intake is located on rear of dryer.
Dryer Exhaust:
Inspect and clean
the dryer exhaust
ducting
at least
once a year.
J
r“--ll
Wall
W3f.i”i...
To
store dryer
for a short period of
time, disconnect power supply and
clean lint filter.
Do not store dryer where it will be
exposed to the weather.
CAUTIONS:
. Before having your electric dryer
connected in your new residence,
be sure your licensed electrician
confirms that the supply voltage
matches the voltage specified on
the rating plate.
Dryer control panel and finishes
may be damaged by some laundry
pre-treatment soil and stain remover
products if such products are
sprayed on or have direct contact
with the dryer.
Apply these pre-treatment products
away from the dryer. The fabric
may then be washed and dried
normally. Damage to your dryer
caused by pre-treatment products
is not covered by your warranty.
BEFORE REPLACING LIGHT
BULB, BE SURE
TO
UNPLUG
THE DRYER POWER CORD.
Unscrew the bulb and replace it
with the same type 10 watt bulb.
Make sure there is at least 3”
clearance from rear dryer louvers
to the wall.
13
14
Wdll
Be There
With the purchase of your new GE appliance, receive the
assurance
fiat
if
YOU
ever need information or
assis~nce
from GE, we’ll be’ there. Ml you have to do is cdl—toll-free!
GEAnswer
Center@
In-Home
Repai
Servjce
800-GE-CARES
AGE Consumer Service professional
wdl
provide expert repair service,
scheduled at a time that’s convenient
for you. Many GE Consumer Service
company-operated locations offer you
service today or tomorrow, or at your
convenience
(7:00
a.m. to
7:00
p.m.
weekda~
9:00
a.m. to
2:00
p.m.
Satur-
days). Our factory-trained technicians
know your appliance inside and out—
so most repairs can be
handed
in just
one visit.
Servjce
Contrac&
800-626-~4
Whatever your question about any GE
major appliance, GE Answer
Cente@
information service is
avadable
to
help. Your
cdl—and your question—
will be answered
prompdy and
courteously And you can
cdl
any
time. GE Answer
Cente#
service is
open 24 hours a
day
7 days a week.
You can have the secure feeling that
GE Consumer Service
wdl
stall be
there after your warranty expires. Pur-
chase a GE contract while your war-
ranty is still in effect and you’ll receive
a substantial discount. With a
mdtiple-
year contract, you’re assured of
fiture
service at today’s prices.
Telecommunication
kce
for
tie
Deti
Pam
andAccessorjes
800-626-2002
Individu~
qu~led
to service their
own appliances
can have needed
parts or accessories sent direcdy to
their home, free of shipping charge!
The GE parts system provides access
to over 47,000 par~.. and
dl
GE
Genuine Renewal Parts are fully
warranted. WSA, MasteKard and
Discover cards are accepted.
User maintenance instructions
contained in this
boo~et cover proee
dws
intended to be performed by
any user. Other servicing
genedy
shotid
be referred to
qu~ed
ser-
vice personnel. Caution must be
exercised, since improper servicing
may cause unsafe operation.
For Customers
Wtih
SpecjalNeeds...
80~62&2M0
Upon request, GE
wtil
provide
Bradle
controls for a variety of GE applimces,
and a brochure to assist in planning a
barrier-free kitchen for persons with
limited
mobdity To obtain these items
free of charge,
cdl
800.626.2000.
Consumers with impaired hearing
or speech who have access to a
TDD
or a conventional teletypewri~r may
cdl
800-TDD-GEAC
(800-833-4322)
to request information or service.
YOUR GE AUTOMATIC CLOTHES DRYER
WARRANTY
I
Save proof of original purchase date
such as your sales slip or cancelled check to establish warranty period.
WHAT
IS
COVERED
FULL ONE-YEAR WARRANTY
For one year from date of original
purchase, we will provide, free of
charge, parts and service labor
in your home to repair or replace
any
part of
the
dryer
that fails
because of a manufacturing
defect.
This warranty is extended to
the original purchaser and any
succeeding owner for products
purchased for ordinary home use
in the
48
mainland states, Hawaii
and Washington,
D.C.
In Alaska the
warranty is the same except that it
is LIMITED because you must pay to
ship the product to the service shop
or for the service technician’s travel
costs to your home.
All warranty service will be provided
by our Factory Service Centers or
by our authorized Customer
Care@
servicers during normal working
hours.
Look in the White or Yellow Pages
of your telephone directory for
GENERAL ELECTRIC COMPANY,
GENERAL ELECTRIC FACTORY
SERVICE, GENERAL
ELECTRIC-
HOTPOINT FACTORY SERVICE or
GENERAL ELECTRIC CUSTOMER
CARE
@
SERVICE.
WHAT IS
N~
COVERED
Servicetripstoyourhometo
teach you how to use the product.
Read your Use and Care material.
If you then have any questions
about operating the product,
please contact your dealer or our
Consumer Affairs office at the
address below, or call, toll free:
GE Answer Center”
800.626.2000
consumer information service
c
Improper installation.
If you have an installation problem,
contact your dealer or installer.
You are responsible for providing
adequate electrical, exhausting
and other connecting facilities.
Replacement of house fuses or
resetting of circuit breakers.
. Failure of the product if it is used
for other than its intended purpose
or used commercially.
Damage to product caused
by accident, fire, floods or acts
of God.
WARRANTOR IS
NOT
RESPONSIBLE
FOR CONSEQUENTIAL DAMAGES.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion
may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
To know what your legal rights are in your state, consult your local or state consumer affairs office or your state’s Attorney General.
Warrantor: General Electric Company
If further help is needed concerning this warranty, write:
Manager—Consumer Affairs, GE Appliances, Louisville, KY 40225
Pati No. 113
D5497P175
DDE8506M
DDE8508M
Pub.
No.
49-9669
DDG8586M
DDG8588M
6-90 CG
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw General Electric DDG8588M bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van General Electric DDG8588M in de taal/talen: Engels als bijlage per email.

De handleiding is 0,53 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info