3/4″ FRAMED CUSTOM PANEL OPTION
For a more custom appearance, 3/4″ framed custom panels
may be installed on trimmed models. The overlay panel is
secured to a 1/4″ finished backer panel. The assembled custom
panel then slides into the trim with the same procedure
described on page 37.
3/4″ FULL-WIDTH OVERLAY
CUSTOM PANEL OPTION
This design provides a nearly trimless appearance. The full width
overlay panel covers most of the door trim. In this design, a spacer
panel must be installed between the finished backer and overlay panel.
NOTE: Left-to-right offset is not equal
to top-to-bottom offset.
NOTE: Left-to-right offset is not equal
to top-to-bottom offset.
.250 + .750 = 1.000 Maximum Total Panel Thickness
IMPORTANT NOTE: Maximum total weight
is 70 pounds for any assembled Fresh Food
panel, 45 pounds total for the Freezer panels
and 15 pounds for the grille panel.