568112
3
Verklein
Vergroot
Pagina terug
1/4
Pagina verder
L I N E S I M I L A T O R
Tester
User manual p.1
Notice d’utilisation p.3
Installation :
- Plug the power cable into the power socket on the rear of the base.
- Plug the adaptor into the mains supply (*).
- Connect the first line cord plug to the line socket of the telephone 1.
(Only use the telephone line provided)
- Connect the other end of the line cord plug to the line socket 1 on the rear
of the Tester.
- Connect the second line cord plug to the line socket of the telephone 2.
- Connect the other end of the line cord plug to the line socket 2 on the rear
of the Tester.
Now your system is ready to be used.
Using :
With 2 telephones connected:
Lift one handset, now you have the following possibilities :
- Press the 1 button of the telephone to do the second telephone ring.
- Press the 2 button of the telephone to hear the busy tonality.
- Press the 3 button of the telephone to hear the audio input if connected.
- Press to do ringing alternatively the two telephones.
Note:
- You have also the possibility to plug just one telephone.
- To connect an audio input use a cable with a 3.5mm plug connected on the
“AUDIO IN” on the rear Tester. You can use a CD player or other any other
musical source.
(*) Classified “hazardus voltage” according to EN60950 standard
1
This Tester is designed to be used with the Geemarc CLEARSOUND
products. Some of other products can not fully works.
Ce Tester est prévu pour fonctionner avec les produits de la gamme
Geemarc CLEARSOUND. Certains autres téléphones peuvent ne pas
fonctionner.
Normally your system is ready to be used in UK, in case of you need to use
it in an other country or change some settings, follow the following
spreadsheet:
: current setting in UK.
Guarantee
From the moment your Geemarc product is purchased, Geemarc guarantee it for the
period of one year. During this time, all repairs or replacements (at our option) are free of
charge.Should you experience a problem then contact our helpline or visit our website at
www.geemarc.com.The guarantee does not cover accidents, negligence or breakages to
any parts. The product must not be tampered with or taken apart by anyone who is not
an authorised Geemarc representative.The Geemarc guarantee in no way limits your legal
rights.
Please note: The guarantee applies to the United Kingdom only.
Declaration : Hereby Geemarc Telecom SA declares that this product is in compliance with
the essential requirements and other relevant provisions of the Radio and Telecommunications
Terminal Equipment Directive 1999/5/EEC and in particular article 3 section 1a, 1b and section
3.
Recycling directives WEEE (Waste Electrical and Electronic Equipment)
When this product is out of order, please do not put it in your domestic waste bin.
Deposit the product in in a appropriate WEEE skip.
For product support and help: 01707 384438
ON or OFF
Line attenuation
Line1&2
Current Line 1
Current Line 2
Ringer frequency
Ringer cadence
0db
-6db
-12db
18db
Short: 35mA
Long: 15mA
Short: 35mA
Long: 15mA
50 Hz
20 Hz
UK
France
European Std
US
Item Specification Switches setting (located on the rear of the Tester)
S1 S2 S3 S4 S5 S6 S7 S8 S9 S10
OFFOFFONON
OFFONOFFON
ONOFFONOFF
ONONOFFOFF
ON
OFF
ON
OFF
ON
OFF
ON
ON
OFF
OFF
ON
OFF
ON
OFF
2
Installation :
- Branchez le cordon de l’adaptateur secteur à l’arrière du Tester.
- Branchez l’adaptateur secteur (*).
- Branchez le premier cordon PTT au téléphone 1.
(Utilisez uniquement le cordon de ligne fourni)
- Branchez l’autre extrémité de ce cordon dans la prise téléphone 1 à
l’arrière du Tester.
- Branchez le second cordon PTT au téléphone 2.
- Branchez l’autre extrémité de ce cordon dans la prise téléphone 2 à
l’arrière du Tester.
Votre ensemble est maintenant prêt à fonctionner.
Utilisation :
Avec 2 téléphones connectés:
Décrochez un combiné. Les fonctions suivantes sont maintenant
disponibles:
- Appuyez sur la touche 1 de votre téléphone pour faire sonner le second
téléphone.
- Appuyez sur la touche 2 de votre téléphone pour avoir la tonalité
d’occupation.
- Appuyez sur la touche 3 de votre téléphone pour écouter la source audio.
- Appuyez sur le bouton du Tester pour faire sonner alternativement les
deux téléphones.
Note:
- Vous avez la possibilité de brancher un seul téléphone.
- Pour connecter une source audio, utilisez un cable muni d’une prise jack
de 3,5mm, branchez-la à l’arrière du Tester. Vous pouvez utiliser un lecteur
CD ou toute autre source musicale compatible.
(*) Classé “tension dangeureuse” selon la norme EN60950
3
Normalement votre Tester est configuré pour être utilisé en France, si vous
voulez l’utililser dans un autre pays ou changer certains paramètres,
reportez-vous au tableau ci-dessous pour le réglage :
: Réglage standard pour la France
Garantie
Cet appareil est garanti 1 an pièces et main-d'oeuvre. La date d'achat
figurant sur le ticket de caisse fera foi. Cette garantie s'exerce sous réserve
d'une utilisation normale de l'appareil. Les dommages occasionnés par les
surtensions électriques, la foudre ou par un choc sur l'appareil ne peuvent en
aucun cas être couverts par la garantie. En cas de problème fonctionnel
rapprochez-vous de votre point de vente.
Ce produit respecte les exigences de compatibilité électro-magnétique et
de sécurité électrique demandées par la directive européenne RTTE.
Recommandation pour le recyclage
La directive DEEE (Déchet d'Equipement Electrique et Electronique) a été
mise en place dans le but d'assurer la collecte sélective en vue de la valorisa-
tion, réutilisation ou recyclage des produits en fin de vie.
Lorsque votre produit ne fonctionne plus, ne le jeter pas dans votre poubelle
ménagère. Déposez-le dans un lieu de collecte approprié.
Tél. service après vente: 01707 384438
ON or OFF
UGLINESIMU ED01
4
Atténuation
des lignes1&2
Courant de ligne 1
Courant de ligne 2
Fréquence de
sonnerie
Cadence de
sonnerie
0db
-6db
-12db
18db
Courte: 35mA
Longue: 15mA
Courte: 35mA
Longue: 15mA
50 Hz
20 Hz
UK
France
Europe Std
US
Fontion Specification Réglage des interrupteurs (Situés à l’arrière du T ester)
S1 S2 S3 S4 S5 S6 S7 S8 S9 S10
OFFOFFONON
OFFONOFFON
ONOFFONOFF
ONONOFFOFF
ON
OFF
ON
OFF
ON
OFF
ON
ON
OFF
OFF
ON
OFF
ON
OFF
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Geemarc LINE SIMULATOR bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Geemarc LINE SIMULATOR in de taal/talen: Engels, Frans als bijlage per email.

De handleiding is 0,06 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info