15
Charging the Battery
1. The signal LED Indicator on
the Headset Receiver will
blink slowly when the battery
level is low. At this stage
there are about 20 minutes of
operating time before the
Headset will switch off.
Recharge the battery.
2. Switch OFF the On/Off
Switch on the Headset (see
figure (12) at right). The
green LED on the Headset
should turn off.
3. Place the Headphone on the
Charging Cradle (see figure
(13) at right), make sure the
charge contact touches the
charge pins on the Charging Cradle.
4. The Charging process starts automatically.
• The LED Indicator glows red during charging.
• It will glow in green after the battery is fully charged.
WARNING:
The battery must not be exposed to excessive heat such as
sunshine, fire etc.
Do not attempt to replace the original rechargeable battery.
When the headphones are not in use, move the switch to the
OFF position to avoid damaging the batteries.
