HS SETTINGS
►RING SETUP ►TONE SETUP ►SELECT BASE ►LANGUAGE
►RENAME HS ►HS DISPLAY ►AUTO ANSWER
DIRECT MEM ►M1-M2-M3-M4
SOS SETTINGS ►SOS NUMBER►SOS MESSAGE►LANGUAGE
DATE & TIME
►DATE FORMAT ►TIME FORMAT ►SET TIME ►SET DATE
ALARM ►ON ►OFF
REGISTRATION ►BASE 1, 2, 3 or 4
DEFAULT ►PIN? 0000 by default
ANS. MACHINE
►MSG PLAYBACK ►DELETE ALL ►MEMO ►TAM ON/OFF
►TAM SETTINGS (ANSWER MODE, TAM LANGUAGE, OGM
SETTINGS,ANSWER DELAY, RECORD TIME, COMPRESSION, BS
SCREENING,REMOTE ACC, CHANGE PIN)
HANDSET REGISTRATION
Note: Handset, alarm pendant and base station are pre-registered.
Up to five handsets can be registered to a single base station.
In the case of re-registration, the PIN code is 0000.
Registration a handset
On Handset: Press MENU/OK select▼▲ REGISTRATION
Press MENU/OK select ▼▲BASE(1-4), Press MENU/OK
enter 4 digits PIN for the base PIN
At the same time on Base: press and hold /HANDSET LOCATOR
on the base to enter the registration mode.
After a short delay, if the registration is successful, there will be a
confirmation beep, and the handset display will go back to idle mode with
the new handset number shown. The base display will also go back to
idle mode.
Registration the Alarm pendant
on Base: press and hold /HANDSET LOCATOR on the base to
enter the registration mode.
On Alarm pendant: Press and hold VOL+ together with Vol- until the LED
on pendant toggling between red and blue. Place the pendant unit close
to the charger. A long beep tone is generated and the LED is blue for a
while if the registration is a success.
De-Registration
On Handset: Press MENU/OK , select ▼▲BS SETTINGS, press
MENU/OK , select ▼▲DELETE HS, press MENU/OK enter
PIN 0000, press MENU/OK , select ▼▲one of the handsets that
you want to de-register, press MENU/ OK to confirm.
INTERCOM
Internal Call
Press C / MUTE , Enter the desired handset number on keypad.
NOTE: If only one cordless handset is registered to the base station,
internal call will not be available.
Call All Handsets
Press C / MUTE , Enter "9" on keypad.
Transfer an External Call
Press MENU / OK , select ▼▲INTERCOM, Press MENU / OK
,
Enter the desired handset number on keypad.
After connection quit the call on handset.
Conference Call
Press MENU / OK , select ▼▲INTERCOM, Press MENU / OK
,
Enter the desired handset number on keypad.
After connection press and hold until CONFERENCE is shown.
NOTE: Any party hangs up during a conference call will leave the other
party still in connection with the external call.
PHONEBOOK
Your phone can store up to 50 private phonebook in the cordless handset
and the telephone base with names and numbers. Each phonebook entry
can have a maximum of 20 digits for the phone number and 12 characters
for the name. You can also select different ringer tones for your
phonebook entries.
Phonebook entries are stored alphabetically by name.
To add new entry
In idle mode:
Press MENU / OK , select ▼▲PHONEBOOK to access the
phonebook list (or empty),
Press MENU / OK to select ADD.
Press MENU / OK to select NAME, enter the name.
Press MENU / OK to select NUMBER, enter number.
Press MENU / OK and ▼▲ to select the desired ringtone for
your phonebook entry.
Press MENU / OK to save.
DIRECT MEM
Your AMPLIDECT295SOS-PRO base can also paired as additional
handsets with some specific handset/device like our PhotoDECT295 or
SOS-PRO295 pendant which need direct memory numbers programed in
the base, and these numbers ( 4 maxi ) have to be added through the
regular handset.
On Handset: Press MENU / OK , select ▼▲DIRECT MEM,
Press MENU / OK , select ▼▲M1-M2-M3-M4,
Press MENU / OK , enter number then OK.
USE YOUR PENDANT
SOS Emergency calls
SOS Settings in Handset
You need to set the SOS numbers before you can make SOS emergency
calls using the pendant or handset.
Using the handset:
Press LEFT SOFTKEY and ▲/▼ to select SOS SETTINGS.
Press LEFT SOFTKEY to show SOS NUMBER.
Press LEFT SOFTKEY and ▲/▼ to select the SOS number to edit
(SOS 1, SOS 2, SOS 3, or SOS 4).
Press LEFT SOFTKEY and enter a new number or edit the number
stored already.
Press LEFT SOFTKEY to confirm or RIGHT SOFTKEY to delete.
Make SOS Emergency Calls
Using the pendant:
Press SOS key on the pendant to enter the emergency calling sequence
from the SOS 1 number to SOS 4 number (cycling 3 times). A call will be
first dialed to the SOS 1 number. If the SOS 1 number does not answer in
60 seconds, the call be will made to the SOS 2 number, and so on.
Using the handset:
Press and hold SOS key on the handset to enter the emergency calling
sequence from the SOS 1 number to SOS 4 number. A call will be first
dialed to the SOS 1 number. If the SOS 1 number does not answer in 60
seconds, the call be will made to the SOS 2 number, and so on.
Note: The other party receiving the SOS message must press * and any
number on their phone to open the SOS call. Thereafter by pressing any
number on their phone every two minutes will keep the emergency call open.
Record SOS Messages
You can record your customized SOS message to be played when you
dial out an SOS emergency call otherwise the default message will be
played.
Using the handset:
Press LEFT SOFTKEY and ▼/▲to select SOS SETTINGS.
Press LEFT SOFTKEY and / to select SOS MESSAGE.
Press LEFT SOFTKEY and ▼/▲ to select RECORD MSG.
Press LEFT SOFTKEY to start SOS message recording and
“RECORDING” will be displayed.
Press LEFT SOFTKEY save your SOS message.
Play SOS Messages
Using the handset:
Press LEFT SOFTKEY and / to select SOS SETTINGS.
Press LEFT SOFTKEY and / to select SOS MESSAGE.
Press LEFT SOFTKEY to show PLAYBACK.
Press LEFT SOFTKEY to start SOS message playback.
Press LEFT SOFTKEY to stop SOS message playback.
Direct Memory Keys
You can store direct memory numbers (M1 and M2) in the handset. Then,
you can dial them directly from idle mode using the pendant.
Set Direct Memory Keys in Handset
Press LEFT SOFTKEY and / to select DIRECT MEM.
Press LEFT SOFTKEY and / to select the memory key to edit (M1
or M2).
Press LEFT SOFTKEY and enter a new number or edit the number
stored already.
Press LEFT SOFTKEY to confirm.
Make Calls using Direct Memory Keys
Using the pendant:
Press M1 or M2 to dial the direct memory number stored in the handset.
ANSWERING MACHINE
Your telephone base includes a telephone answering machine that
records unanswered calls when it is on. The answering machine can
store up to 59 messages within the maximum recording time of
approximately 15 minutes. As well as recording incoming messages, you
can record memos for other users of your phone.
Press /ANS ON/OFF to switch the answering machine ON or OFF.
REMOTE OPERATIONS
If you are away from your home, you can call your answering machine to
switch on or off the answering machine and listen to your messages
remotely using another tone-dialing phone.
1. Place a call from a tone-dialing phone.
2. When the answering machine answers the call and starts playing OGM,
press .
3. Enter the 4-digit Remote Access PIN (default PIN is 0000).
4. Press the following keys to carry out your desired function.
GUARANTEE
From the moment your Geemarc product is purchased, Geemarc
guarantee it for the period of two years. During this time, all repairs or
replacements (at our discretion) are free of charge. Should you
experience a problem then contact our help line or visit our website at
www.geemarc.com.
The guarantee does not cover accidents, negligence or breakages to any
parts. The product must not be tampered with or taken apart by anyone
who is not an authorized Geemarc representative.
The Geemarc guarantee in no way limits your legal rights.
IMPORTANT: YOUR RECEIPT IS PART OF YOUR GUARANTEE AND
MUST BE RETAINED AND PRODUCED IN THE EVENT OF A
WARRANTY CLAIM.
Please note: The guarantee applies to the United Kingdom only.
DECLARATIONS:
CE Directives
Geemarc Telecom SA hereby declares that this product is in compliance
with the essential requirements and other relevant provisions of the Radio
Equipment Directive 2014/53/UE.
The CE declaration of conformity may be consulted at
www.geemarc.com
Recycling Directives
The WEEE (Waste Electrical and Electronic Equipment) has been put in
place for the products at the end of their useful life are recycled in the best
way.
When this product is finished with, please do not put it in your domestic
waste bin. Please use one of the following disposal options:
- Remove the batteries and deposit them in an appropriate WEEE skip.
Deposit the product in an appropriate WEEE skip.
- Or, hand the old product to the retailer. If you purchase a new one, they
should accept it.
Thus if you respect these instructions you ensure human health and
environmental protection.
For product support and help visit our website at www.geemarc.com
2 rue Galilée, 59791 GRANDE-SYNTHE CEDEX, FRANCE
E-mail : help@geemarc.com telephone 01707 387602
lines are open 09h00 to 16h00 Mon to Fri
This product is made in China To Geemarc Telecom
QUGAMPLIDECT295 SOS-PRO_En_A3_V1.5
