764963
30
Verklein
Vergroot
Pagina terug
1/31
Pagina verder
in.k500
intuitive color keypad
TechBook
Gecko Alliance
450 des Canetons, Québec (Qc), G2E 5W6 Canada, 1.800.78.GECKO
www.geckoalliance.com Printed in Canada
9919-101209-K
Rev. 02-2020
© Groupe Gecko Alliance Inc., 2020
All trademarks or registered trademarks
are the property of their respective owners.
Compact
Full color control
Versatile
5
1
Warnings ������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 2
Introduction ��������������������������������������������������������������������������������������������������������������������������������������������������������������������� 3
Overview �������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 4
-in�k500 dimensions �������������������������������������������������������������������������������������������������������������������������������������������� 4
Installation ����������������������������������������������������������������������������������������������������������������������������������������������������������������������� 5
-Installation of in�k500 ����������������������������������������������������������������������������������������������������������������������������������������� 5
-Drilling template ������������������������������������������������������������������������������������������������������������������������������������������������� 6
-Installation notes ������������������������������������������������������������������������������������������������������������������������������������������������� 7
-Connecting in�k500 keypad to the spa pack ������������������������������������������������������������������������������������������������������ 7
-Installation errors ������������������������������������������������������������������������������������������������������������������������������������������������ 8
-Power-up message ��������������������������������������������������������������������������������������������������������������������������������������������� 8
Connecting the in�stream, in�tune and in�stream 2 to the spa pack ��������������������������������������������������������������������������������� 9
-in�stream ������������������������������������������������������������������������������������������������������������������������������������������������������������ 9
-in�tune ���������������������������������������������������������������������������������������������������������������������������������������������������������������� 9
-in�stream 2 ��������������������������������������������������������������������������������������������������������������������������������������������������������� 9
Keypad functions ����������������������������������������������������������������������������������������������������������������������������������������������������������� 10
-in�k500 keypad layout �������������������������������������������������������������������������������������������������������������������������������������� 10
-Settings key ������������������������������������������������������������������������������������������������������������������������������������������������������ 10
-Mode key ���������������������������������������������������������������������������������������������������������������������������������������������������������� 10
-Power ��������������������������������������������������������������������������������������������������������������������������������������������������������������� 10
-Main screen ����������������������������������������������������������������������������������������������������������������������������������������������������� 10
-Start or stop accessories ����������������������������������������������������������������������������������������������������������������������������������� 11
-Water temperature ������������������������������������������������������������������������������������������������������������������������������������������� 11
-Settings ������������������������������������������������������������������������������������������������������������������������������������������������������������� 12
-Water care �������������������������������������������������������������������������������������������������������������������������������������������������������� 13
-Water care modes �������������������������������������������������������������������������������������������������������������������������������������� 13
-Modifying schedules ���������������������������������������������������������������������������������������������������������������������������������� 14
-Heat pump ������������������������������������������������������������������������������������������������������������������������������������������������������� 14
-Heat pump modes ������������������������������������������������������������������������������������������������������������������������������������� 15
-Audio ���������������������������������������������������������������������������������������������������������������������������������������������������������������� 16
-in�clear-200 / linked version ����������������������������������������������������������������������������������������������������������������������������� 16
-Maintenance ���������������������������������������������������������������������������������������������������������������������������������������������������� 17
-Maintenance reminders ����������������������������������������������������������������������������������������������������������������������������������� 17
-Standby ������������������������������������������������������������������������������������������������������������������������������������������������������������ 17
-Date and time ��������������������������������������������������������������������������������������������������������������������������������������������������� 18
-Keypad settings ������������������������������������������������������������������������������������������������������������������������������������������������ 18
-WiFi (in�touch only) ������������������������������������������������������������������������������������������������������������������������������������������ 19
-Config ��������������������������������������������������������������������������������������������������������������������������������������������������������������� 20
-Restore/Audio configuration ����������������������������������������������������������������������������������������������������������������������������� 21
-About ���������������������������������������������������������������������������������������������������������������������������������������������������������������� 21
-in�tune operation ���������������������������������������������������������������������������������������������������������������������������������������������� 22
-in�stream operation ������������������������������������������������������������������������������������������������������������������������������������������� 23
-in�stream 2 operation ��������������������������������������������������������������������������������������������������������������������������������������� 24
-in�clear functions ���������������������������������������������������������������������������������������������������������������������������������������������� 25
-in�mix functions ������������������������������������������������������������������������������������������������������������������������������������������������ 26
Error messages �������������������������������������������������������������������������������������������������������������������������������������������������������������� 27
Feature matrix ��������������������������������������������������������������������������������������������������������������������������������������������������������������� 28
Specifications ���������������������������������������������������������������������������������������������������������������������������������������������������������������� 29
Table of contents
2
WARNINGS
Before installing or connecting the unit, please read the following�
FAILURE TO COMPLY WITH THE FOLLOWING WARNINGS MAY SIGNIFICANTLY SHORTEN THE PRODUCT’S LIFE
TIME, AND LEAD TO FAILURES AS WELL AS HAZARDOUS CONDITIONS*. COMMON SENSE MUST ALWAYS PREVAIL
WHEN EVALUATING THE INSTALLATION AND/OR USE OF ANY ELECTRONIC CONTROL IN A FINAL APPLICATION.
RESPECT ENVIRONMENTAL CONDITIONS LISTED AT END OF TECHBOOK�
THIS UNIT MUST BE INSTALLED BY QUALIFIED PERSONNEL�
ONLY QUALIFIED PERSONNEL ARE TO SERVICE THIS UNIT�
THERE ARE NO USER SERVICEABLE PARTS INSIDE�
THIS UNIT SHOULD BE INSTALLED ON A CLEAN FLAT SURFACE�
THE GASKET ON THE BACK OF THE UNIT WILL PREVENT WATER INFILTRATION INSIDE, BEHIND THE MOUNTED
SURFACE� IF THE GASKET IS DAMAGED, SEAL THE BACK OF THE UNIT WITH SILICONE TO AVOID ANY LEAKAGE
BEHIND THE MOUNTED SURFACE�
THIS UNIT MUST BE MOUNTED ON THE OUTSIDE EDGE OF THE SPA� SEE INSTALLATION SECTION FOR DETAILS�
THE BACK OF THIS UNIT SHOULD NOT BE ENCLOSED IN A WAY THAT CAUSES WATER TO COLLECT�
SEE INSTALLATION SECTION FOR DETAILS�
* HAZARDOUS CONDITION:
A CONDITION THAT IS POTENTIALLY DAMAGING AND/OR DANGEROUS TO THE OPERATOR OR SURROUNDINGS�
THIS INCLUDES, BUT IS NOT LIMITED TO: FIRE, FLOODING OR OTHER WATER DAMAGE, DIELECTRIC BREAKDOWNS
(PRESENCE OF HIGH VOLTAGE), ETC�
MAINTENANCE
If you have problems, do not attempt to repair the unit yourself� Return it to your dealer or service station for servicing
ACCESSORY PARTS
Be sure to use only the specified accessory parts� Use of other than designated parts may damage this unit internally or may
not securely install the unit in place� This may cause parts to become loose resulting in hazards or product failure�
DISPOSAL OF THE PRODUCT
The appliance (or the product) must be disposed of separately
in accordance with the local waste disposal legislation in force�
Compatible spa controllers:
in�xm2, in�xe, in�yt, in�yj and in�ye with compatible software revision�
Aeware®, Gecko®, and their respective logos are Registered Trademarks of Gecko Alliance Group�
in�k500™, in�xm2™, in�xe™, in�yt™, in�ye™, in�yj™, in�tune™, in�stream™ and in�therm™,
and their respective logos are trademarks of Gecko Alliance Group�
All other product or company names that may be mentioned in this publication are tradenames, trademarks or registered
trademarks of their respective owners�
Warnings
3
Introduction
in�k500
intuitive color keypad
The in�k500 is built with all the great features you've come
to love in the in�k800, but in a smaller package�
It is discreet, compact, and unobtrusively beautiful�
Save space without losing out on function�
4
in.k500 dimensions
Overview
7�16"
(181�74 mm)
3�33"
(84�46 mm)
1�95"
(49�51 mm)
5
Installation of in.k500
To install the in�k500, use the drilling template provided in this section�
Determine the mounting location and stick the template on chosen location�
Cut out an opening according to the template�
Clean the installation surface and peel the adhesive gasket from the back of the keypad�
Insert keypad and align it correctly, then ensure it is properly glued by gently pressing evenly on the entire surface�
Installation
Gasket with or without adhesive
Optional wing nuts
and spacers
6
Drilling template
Installation
2�625"
66�68mm
R0�900"
22�86mm
6�750"
171�45mm
6�250"
158�75mm
R0�250"
6�35mm
7
Installation
in�k500 must be installed
on the outside edge of the
hot tub, so that it is not
subject to moisture trapped
by the cover�
The back of the in�k500 should not be enclosed where
water can gather, but instead cut out�
Connecting in.k500 keypad to the spa pack
Installation notes
Note: always shut power down before connecting an accessory to the spa pack�
To connect the keypad, remove the cover, then insert the in�link connector into the appropriate keypad connector
(as illustrated)� Route the cable through one of the molded strain relief channels on the bottom right side of the spa
pack (as illustrated)� Fill the remaining space with the foam gaskets supplied� Don’t forget to replace the cover and all
screws (torque to 8 in� lb max (0�9 N�m))�
Main keypad in�k500
Vent hole on back of keypad should not be blocked�
Connect the
main keypad as
indicated here�
8
Installation errors
Upon connecting the in�k500 to the spa pack you may see one of the following error messages:
Please follow the instructions in the message or contact your dealer for more information�
Power-up message
The in�k500 keypad does not store the date & time� When the in�k500 starts up after a power loss a message will prompt
the user to reprogram the date and time�
Installation
Note:
With the in�k500 equipped with a real-time clock (RTC):
If the power was lost for few hours, this message will
not appear�
9
in.stream
Use the adapter cable (Part # 9920-400976) to connect the in�stream to the CO port of the spa pack�
in.tune
Use the adapter cable (Part # 9920-400976) to connect the in�tune to the CO port of the spa pack�
See Factory reset/Audio configuration section for details on setting up audio�
Connecting the in.stream, in.tune and in.stream 2 to the spa pack
in.stream 2
Use the CO cable (Part # 9920-401244) to connect the in�stream 2 to the CO port of the spa pack�
10
Main screen
The main screen gives you access to your accessories and
water temperature� At the bottom of the screen
you will see any error or maintenance messages
that are present�
Power
Press any button to turn the keypad on� After 30 minutes
without activity it will shut off�
Keypad functions
in.k500 keypad layout
*Functions for keys 1 and 2 will depend on your system's low level configuration.
Settings
Light Key
Mode
Up
Key 1
Down
Selection lights Key 2
Settings key
One press gives you access to a menu to manage the settings of your spa� Refer to the settings section for details about
the settings menu�
Mode key
Successive presses on the Mode key will give access to control different optional accessories of your spa such as Audio
and others� Note that if an accessory is not present in your spa configuration, its menu will not appear�
Refer to the following section to get details about the possible accessories and their detailed functionalities�
The screen will revert back to the spa mode if no key is pressed for 60 seconds�
If you don't have any accessories on your spa, the Mode key can be used to directly change your display orientation�
11
Start or stop accessories
To start or stop an accessory, press the associated button�
Icons will become animated when their accessory is
turned on, and inanimate when turned off� Icons on the
screen will reflect the speed or state of the devices running
on your spa�
When an accessory has more than two states, press the
button until it reaches the desired state�
Note (version 14.00 and higher):
A special buttons and icons mapping may be used when
the spa configuration has 4 accessories* (3 pumps and
a blower or 4 pumps and no blower)� In this case only,
buttons and icons are divided in 2 sets of accessories�
Button #1 starts or stops pump #1 and pump #2�
Button #2 starts or stops Pump #3 and Pump #4/blower�
Corresponding icons will be animated when one or more
accessories are on�
* Only Pump #1 can have a dual speed.
Water temperature
The temperature shown at the top of the screen
is the current water temperature� Use the Up and Down
buttons to set the desired temperature�
The set point will appear in blue at the bottom�
After 3 seconds without any change to the set temperature
value, the keypad will resume the normal display of
messages�
When the set value is lower than the current temperature
Cooling to xx.x will appear� When the set value is higher
than the current temperature, Heating to xx.x will be
indicated� Normally there is a short delay before
the heating starts, during which Heating Suspended
is indicated�
Keypad functions
12
Settings
From the home page you can access the Settings,
where you will find:
Water care
Heat Pump (if installed)
Audio (if installed)
in.clear-200 (linked version)
Standby
Maintenance
Date & time
Keypad
Wi-Fi
Config
Restore
About
Use the arrow keys to move up and down in the list�
To select an option, press the lit button beside it
(Light button)�
At any point you can press the Settings button to return to
the home screen�
Keypad functions
13
Water care
The Water Care section will help you set up your ideal
filtration and heating settings� Choose from Away,
Standard, Energy Savings, Super Energy Savings, and
Weekender, depending on your need� Use Light key to
choose your setting� A checkmark will appear on the
selected icon to confirm�
In Economy mode, the set point will be reduced
by 20°F*, which means that the heating system will not be
engaged unless the temperature falls to 20°F below
the spa's set temperature�
* Default pack value
Water care modes
Away:
In this mode the spa will always be in economy;
the set point will be reduced by 20° F*�
Standard:
The spa will never be in economy mode and will be
filtering according to the pack's low level configuration�
Energy Savings:
The spa will be in economy mode during the peak hours
of the day and resume normal mode on the weekend*�
Super Energy Savings:
The spa will always be in economy mode during peak
hours, every day of the week*�
Weekender:
The spa will be in economy mode from Monday
to Friday, and will run normally on the weekend*�
*Filtration will be reduced when the economy mode is active.
Keypad functions
19
WiFi (in.touch only)
For the WiFi menu to appear in the Settings menu
your in�touch module must be equipped with software
version 11�00 or higher� This menu allows you to connect
your in�touch module to a WiFi network or to change
its network�
For more details about other in�touch connection
methods please see the in�touch techbook�
To connect your in�touch module to a wireless network,
use the Up/Down keys to go to the WiFi option in the
Settings menu and Light key to select it�
After a few seconds the available networks will appear
on the screen, as well as their signal strength�
Use the Up/Down keys to move through the list�
Select your network by pressing on Light key�
If the WiFi network is password protected enter it when
prompted�
Use the arrow keys to choose your letters and
change the type of character (uppercase, lowercase,
number, symbol)�
Use Key 2 to move the curser forward
Use Key 1 to backspace
Use Light key to confim
If no password is required the in�touch will connect
automatically�
Once the in�touch module is connected to a WiFi
network a check mark in a green circle will appear in the
WiFi menu, and the network logo will change to green in
Settings menu�
Note:
WiFi logo color in Settings menu corresponds to the
in�touch connection state�
Yellow = not connected
Green = connected to a network
Yellow with wait icon = connection attempt to a network
Red with wait icon = in�touch no longer detected
(in�touch must be reset before next connection attempt)
Keypad functions
20
Low level configuration Key 1 Key 2 Light
1 pump Pump 1 --- Light
2 pumps Pump 1 Pump 2 Light
2 pumps + blower Pump 1 Pump 2 + Blower Light
4 pumps* Pump 1 & Pump 2 Pump 3 + Pump 4 Light
3 pumps + blower* Pump 1 & Pump 2 Pump 3 + Blower Light
Config
Please do not make changes in the electrical configuration
section unless you are a qualified electrician.
In this section you can change the low-level configuration,
number of phases, input current and heat pump current�
Use Up/Down to move between parameters, and the Light
key to select a parameter to change� Please refer to the
techBook of your specific control system for spa for details
about the low level settings�
Once you have changed the Number of Phases in the
menu, you will be unable to use the Up/Down keys to
return to the Low-level Configuration menu� Please go
back and re-enter the Config menu�
Note with version 15.00 and higher:
Depending on the pack configuration, a code may be
required to change these settings. This code is "5555".
The table below shows the key assignation based on the accessories selected in your pack's low level configuration�
Please refer to the Quick Start Card (QSC) for specifications to identify the low level configuration for your spa�
Possible key mappings
Keypad functions
* Only pump 1 can have a dual speed.
29
Specifications and design are subject to change without prior notice.
Part number
0607-008033
Model
IN�K506-CL-GE1
Environmental
Operating temperature: -4°F (-20°C) to 149°F (65°C)
Storage temperature: -22°F (-30°C) to 185°F (85°C)
Humidity: Up to 70% condensing
Water ingress protection: IPX-5
Mechanical
Weight: 0�78 lb (0�35kg)
Dimensions (W x H x D) 7�155” x 3�325” x 1�949” (182 mm x 84 mm x 50 mm)
Compatibility
in�yt, in�ye, in�yj, in�xe or in�xm2 spa packs with appropriate software revision
Specifications
30

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gecko in.k500 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gecko in.k500 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,04 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Gecko in.k500

Gecko in.k500 Gebruiksaanwijzing - Deutsch - 31 pagina's

Gecko in.k500 Gebruiksaanwijzing - Français - 31 pagina's

Gecko in.k500 Gebruiksaanwijzing - Espanõl - 31 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info