544879
9
Verklein
Vergroot
Pagina terug
1/18
Pagina verder
industrial controls
®
industrial controls
®
928
E
C
O
Connecting the limit switches
The two limit switches UP and DOWN have to be connected as potentialfree contacts at the
screw terminals 30/31 (UP) and 32/33 (DOWN).
It is possible to connect a second limit switch to the DC 3 de Luxe for the UP direction.
Two different UP positions can be choosen on the front of housing (summer-/winter positi-
on).
28
29
Connection limit switch UP 1
Connection limit switch UP 2
(e.g. half open)
Connection limit switch DOWN
30
31
32
33
Connecting external push-buttons UP, STOP, DOWN
For the use from outside of the DC 3 an external switch (e.g. key-switch) can be connec-
ted. The push buttons UP and DOWN must have closing function. As the STOP function is
connected in the safety circle, it has to be connected as an opener. In case two 2x push-
buttons are connected, STOP inside and STOP outside must be switched in serial mode.
34
35 42
43
40 41
36
37 44
45
38 39
Push button module 1
push button UP
push button STOP
push button DOWN
Push button module 2
push button UP
push button STOP
push button DOWN
Position of jumpers on the main board for safety edge
1. not connected: opto-electronic safety edge
connected: resistor 8,2 k
2. not connected: dead man UP - direction
connected: one touch UP - direction
3. not connected: dead man DOWN - direction
connected: one touch DOWN - direction
If the Comfort module is connected the jumpers 2 and 3
must be removed.
!
1
23
UK
AUF
AB
F
D
Jumper F - D (DC 3 ECO)
The two jumpers F-D must remain in position D.
There is no pre-warning element connectable.
UP
DOWN
Connecting a photo-cell (optional, only if Comfort module is connected!)
To connect a photo-beam to cover the drive througharea the photo-beam is connected to
the terminals 51, 52 & 53. If the infrared beam of the photo-beam is broken during the
DOWN direction the door will stop and reverse to a fully open position.
Using a photo-cell with receiver and transmitter, the power supply is connected to
the terminals 52 & 53.
51
52
53
NC
CC
GND
+
Spannungs-
versorgung
Steuerlogik
logic board
supply
voltage
It is not possible to use the switch in case
of malfunction of a security device (Danger
area not visible) - optional, only if Comfort
module is connected 5V DC/
e.g. Schleifendetektoren.
The Danger area has to be visible, dead-
mans function is possible 24V DC/ e.g.
3x push button.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Geba-Tronic-DC-3-ECO---Standard---de-Luxe

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Geba Tronic DC 3 ECO - Standard - de Luxe bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Geba Tronic DC 3 ECO - Standard - de Luxe in de taal/talen: Engels als bijlage per email.

De handleiding is 0,75 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Geba Tronic DC 3 ECO - Standard - de Luxe

Geba Tronic DC 3 ECO - Standard - de Luxe Gebruiksaanwijzing - Deutsch - 18 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info