813414
36
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
36
Servicing Instructions - Replacing Parts
Touch Pad
Supply Cable
Battery Power
Supply
Touch Pad
Control
Ignition
Lead
Stepper Motor Cable
Pilot Pipe
Thermocouple
Earth Lead
Interrupter Leads
23
13.5 Prior to re-connection of the control box to the appliance, if
there is no communication between the remote handset and
the appliance, or if the handset is replaced, it will be
necessary to pair the handset with the appliance. Please
refer to Commissioning Section 2.
13.6 Ensure batteries are fitted and working in the handset.
13.7 Re-fit the touch pad control cable and the battery power
supply cable to the control box.
14. Main Injector
To change the main injector:
14.1 Undo the injector fee pipe.
14.2 Undo the lock nut from the injector.
14.3 Replace with the correct size injector.
15. Primary Aeration Plate
NOT ALL MODELS HAVE AERATION PLATES. REFER TO
TECHNICAL SPECIFICATIONS, PAGES 13 & 14.
15.1 Remove the burner module as described in Servicing,
Section 7.
15.2 Remove the fixing screw and slide the plate off the venturi.
15.3 Replace with the correct size plate and secure with the
screw. Ensure the lower edge of the plate is located over
the venturi flange, see Diagram 24.
24
16. Changing Between Gas Types
In order to change between gas types it will be necessary to
change both the burner assembly and the complete control
assembly.
Contact your Gazco retailer for further information.
A kit of parts is available for this. Always quote the Model
number and Serial number when ordering any spare parts.
17. Pressure and leak testing the
appliance
17.1 To gain access to the pressure test point, see Diagram 25
follow Section 8, Main Control Assembly.
25
17.2 To leak test any gas joints on the appliance the control
assembly must be undone and tilted backwards, see
Section 8.2, Diagram 13.
17.3 Because there is now no burner fitted to perform a leak test,
place a manometer tube over the injector tip.
17.4 Light the appliance and spray any joints with leak
detector fluid.
17.5 Tighten joints or replace as required.
17.6 To check the inlet working pressure, replace the control
assembly and connect a manometer to the pressure test
point, see Diagram 26.
17.7 Replace the burner and relight the appliance.
17.8 Operate the appliance at highest flame setting and check
that the inlet pressure is in accordance with specifications
detailed on pages 12 & 13.
36

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gazco Riva Vision Large MK1 Series Balanced Flue Instructions bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gazco Riva Vision Large MK1 Series Balanced Flue Instructions in de taal/talen: Engels als bijlage per email.

De handleiding is 4.28 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info